https://buildings.honeywell.com/us/en/search-results.html

Operating & Indicating Panels

PDRP- Series Fire Alarm Control Panel

Reliable fire detection, signaling, and protection for commercial, industrial, and institutional buildings requiring water-based releasing.

The PDRP-2001, PDRP-2001C, and PDRP-2001E fi re alarm control panels (FACPs) are compatible with the System Sensor i Series conventional smoke detectors that transmit signals to the FACP to indicate important status conditions, such as low temperature 45°F (7.22°C) or required maintenance. This control panel is compatible with conventional input devices such as waterflow devices, tamper switches, 2-wire smoke detectors, 4-wire smoke detectors, pull stations, and other normally open contact devices. The PDRP-2001, PDRP-2001C, and PDRP-2001E panels supervise wiring, AC voltage, battery charge, and battery level.

An installed waterflow detector, compatible smoke detector, or any normally open fi re alarm initiating device will activate audible and visual signaling devices, illuminate an indicator, display alarm information on the panel’s LCD, sound the piezo sounder at the FACP, activate the FACP alarm relay, and operate an optional module used to notify a remote station or initiate an auxiliary control function.

Four outputs are programmable as notification appliance circuits (NACs) or releasing circuits. Three programmable Form C relays (factory programmed for alarm, trouble, and supervisory) and 24 VDC special application resettable and non-resettable power outputs are also included on the main circuit board.

Unless otherwise specified, the information in this data sheet applies to both the 110/120 VAC and 220/240 VAC versions of the panels.

Features & Benefits:
  • Designed for sprinkler standards NFPA 13, 15, and 16
  • Allows connection to 220/240 VAC
  • Dual hazard operation
  • Adjustable water flow discharge timer and two soak timers
  • Cross-zone (double-interlock) capability
  • 6 programmable Style B (Class B) IDCs (Initiating Device Circuits)
  • System Sensor i Series detector compatibility
  • 4 programmable Style Y (Class B) output circuits – (special application power)
  • Compatible with System Sensor synchronization protocol
  • 3 programmable Form C relays
  • 7.0 amps total 24 VDC output current
  • Resettable and non-resettable output power
  • Built-in programmer
  • 80-character LCD display (backlit)
  • Real-time clock/calendar with daylight saving time control
  • History log with 256 event storage
  • Piezo sounder for alarm, trouble, and supervisory
  • Low AC voltage sense
Certifications:
  • UL Listed S624
  • FM Approved 3031281
  • ULC S6352
  • CSFM 7165-1653:199

Others

  • Output Current
    • 7 ampere
    • 2 ampere
    • 15 milliampere
  • Standby Current
    • 4 milliampere
  • Input Current
    • 500 milliampere
  • Maximum Output Voltage
    • 30 voltage alternating current
    • 24 voltage direct current
    • 30 voltage direct current
  • Maximum Wire Gauge
    • 14 AWG
  • Number of Zones
    • 30
  • Number of Outputs
    • 4
  • Maximum Operating Humidity
    • 93Percentage
  • End of Line Resistance
    • 4.7 k?
  • Addressable Points
    • 30
  • Number of Inputs
    • 30
  • Maximum Battery Capacity
    • 26 A·h
  • Application
    • Industrial
    • Institutional Buildings
    • Commercial
  • Controls
    • Reset
    • Silence

Others

  • Output Current
    • 7 ampere
    • 2 ampere
    • 15 milliampere
  • Standby Current
    • 4 milliampere
  • Input Current
    • 500 milliampere
  • Maximum Output Voltage
    • 30 voltage alternating current
    • 24 voltage direct current
    • 30 voltage direct current
  • Maximum Wire Gauge
    • 14 AWG
  • Number of Zones
    • 30
  • Number of Outputs
    • 4
  • Maximum Operating Humidity
    • 93Percentage
  • End of Line Resistance
    • 4.7 k?
  • Addressable Points
    • 30
  • Number of Inputs
    • 30
  • Maximum Battery Capacity
    • 26 A·h
  • Application
    • Industrial
    • Institutional Buildings
    • Commercial
  • Controls
    • Reset
    • Silence
  • Maximum Wire Gauge : 14 AWG
  • Number of Zones : 30
  • Number of Outputs : 4
  • Maximum Operating Humidity : 93Percentage
  • End of Line Resistance : 4.7 k?
  • Addressable Points : 30
  • Number of Inputs : 30
  • Maximum Battery Capacity : 26 A·h
  • Application : Industrial|Institutional Buildings|Commercial
  • Controls : Reset|Silence
  • Output Current : 7 ampere|2 ampere|15 milliampere
  • Maximum Output Voltage : 30 voltage alternating current|24 voltage direct current|30 voltage direct current
  • Standby Current : 4 milliampere
  • Input Current : 500 milliampere
Datasheets
Name
Description
File Size
Date
Size
PDRP-2001-C-E Data Sheet WFDS873 Datasheet
application/pdf 228.9 KB
4/29/2022
228.9 KB
Others
Name
Description
File Size
Date
Size
7165 -- FIRE ALARM CONTROL UNIT (COMMERCIAL)
application/pdf 163.09 KB
4/29/2022
163.09 KB
PDRP-1002 Series Agent Releasing Control Panel Datasheet
application/pdf 432.62 KB
3/9/2022
432.62 KB
Pre-Action-Deluge Control Panel Manual
application/pdf 2.2 MB
3/9/2022
2.2 MB
Fire Sprinkler Monitoring Overview
application/vnd.openxmlformats-officedocument.presentationml.presentation 34.84 MB
3/9/2022
34.84 MB
Device Compatibility Document (LS10167-002SS-E) Manual
application/pdf 194.38 KB
3/9/2022
194.38 KB
PDRP-1002 Series Agent Releasing Control Panel
application/pdf 444 KB
2/17/2022
444 KB
Name
Description
File Size
Date
Size
PDRP-2001-C-E Data Sheet WFDS873 Datasheet
228.9 KB
4/29/2022
228.9 KB
7165 -- FIRE ALARM CONTROL UNIT (COMMERCIAL)
163.09 KB
4/29/2022
163.09 KB
PDRP-1002 Series Agent Releasing Control Panel Datasheet
432.62 KB
3/9/2022
432.62 KB
Pre-Action-Deluge Control Panel Manual
2.2 MB
3/9/2022
2.2 MB
Fire Sprinkler Monitoring Overview
34.84 MB
3/9/2022
34.84 MB
Device Compatibility Document (LS10167-002SS-E) Manual
194.38 KB
3/9/2022
194.38 KB
PDRP-1002 Series Agent Releasing Control Panel
444 KB
2/17/2022
444 KB
Image
SKU
Description
alt
PDRP-2001
Six zone, 24-volt deluge-preaction control panel