You are browsing product catalog for
Output modules are designed for use with any NOTIFIER protocol fire alarm control panel and provide a monitored single output circuit.
Ten Channel Input Module provides an interface with normally open contact devices. The supervised state: normal, open circuit fault or short circuit alarm is sent back to the control panel.
Output Modules offers a single output circuit for controlling various fire safety related devices with the FX NET fire detection system. They supplied in a wall mounting box as standard with a grounding terminal provided.
Main Control Cards are part of Vigilon system. It is available with EN and BS version plus 16 and 8 line display.
System Sensor multiple input and output modules are designed to meet a range of applications in which numerous single modules are used.
MI-CR6-S2I Multi Module is an Addressable control module with 6 output circuits in NO/NC relay form. This module is recommended for activation through the communications loop of doors, fire dampers, lift stops, etc.
The AOM-2RF Module is designed for installation in the signaling line circuit of any Gamewell-FCI analog addressable fire alarm control panel
Addressable output supervised control modules allow a Gamewell-FCI® analog addressable fire alarm control panel (FACP) to switch an external power supply, such as a DC supply or audio amplifier (up to 80 Vrms), to notification appliances.
Analog Addressable Device Control card for addressable devices that require APOLLO DISCOVERY and XP95 protocols.With these protocols a wide range of fire detectors, push buttons, optic-acoustic signaling and input/command modules are available.
Honeywell Analog Input Device Control Card with two thresholds that can be set through the panel keyboard. It can manage gas detection systems, level and temperature signal systems
Analog input device control cards can control all the 4-20 mA output transducers normally used for explosive and toxic gas, oxygen, temperature and level sensors.
CMF-300 addressable control modules provide Fire-Lite® alarms intelligent control panels with a circuit for notification systems, such as horns and strobes.
Supervised control modules are 6-circuit and provide intelligent alarm systems with supervised monitoring of wiring to load devices that require an external power supply to operate, such as horns, strobes, or bells.
CRF-300-6 relay control modules provide intelligent fire alarm systems with six Form C relays.
M200-DIN is a Rail Bracket used with M700 series Module. The M700 Series module is designed for use protocol fire alarm control panel and include selectable loop isolation in every device.
The DS-DB Digital Series Distribution Board and its associated amplifiers provide bulk amplification capability to the Digital Voice Command (DVC) system while retaining digital audio distribution capabilities.
Input module is suitable for controlling detection systems with conventional lines and can be used in systems with already existing detection lines for controlling automatic fire extinguishing systems with double enable logic.
Extension modules IQ8Control for additional functions and module slots.
The F3002 8-Input Card can manage conventional detection lines. It is particularly suitable for systems where detection lines are already in place, for cross-line logic control of automatic fire extinguishing systems, or in intrinsic safety systems.
Honeywell F4001 Analog Input Device Control Card has one 4-21 mA analog input card, with two thresholds that can be set through the panel keyboard. It can manage gas detection systems, as well as level and temperature signal systems.
Honeywell F4002 Analog Input Device Control Card is two 4-21 mA analog input card, with two thresholds that can be set through the panel keyboard
Honeywell F4003 Analog Input Device Control Card is eight 4-21 mA analog input card, with two thresholds that can be set through the panel keyboard
Honeywell F6001 Control Card gathers and deploys the signals and logic associations relating to fire extinguishing control. It does not have physical I/O, but uses inputs and commands managed by other cards of the H-S81-HS system.
Honeywell F6002 Special Logic Control Card is designed to produce and manage functional logics through flip/flop, toggle and timer devices
Honeywell F6002 Special Logic Control Card is designed to produce and manage functional logics through flip/flop, toggle and timer devices. Its Operating mode is configurable through ProHS81 software program. It has SMD technology multilayer circuit.
Honeywell F7001 Analog Device Control Cards manages the addressable devices that adopt the DCP protocol of HOCHIKI America
Honeywell F7009 Analog Addressable Device Control Card is for addressable devices that require APOLLO DISCOVERY and XP95 protocols
Honeywell F7010 Addressable Device Control Card is used with System Sensor Protocol for which pushbuttons, command modules, and managing modules are available
FCM-1 intelligent addressable control module provides supervised monitoring of wiring to load devices that require an external power supply to operate, such as solenoids, sounders, strobes, or bells.
The IDP-Iso is an addressable line isolator module for use with Silent Knight IFP-series fire alarm control panels (FACPs).
The Notifier ISO-X(A) Fault Isolator Module is used with Notifier Onyx and CLIP series Fire Alarm Control Panels (FACPs) to protect the system against wire-to-wire short circuits on the SLC loops.
Gent Main Control PCB is used for Compact Control Panel.
I300 fault isolator modules are designed for use with Fire-Lite® addressable fire alarm control panels (FACPs) and are intended to protect systems against wire-to-wire short circuits on SLC loops.
IDP-Control Supervised Control Modules have been designed for use in intelligent, two-wire systems, where the individual address of each module is selected using the built-in rotary switches.
The HN-AS20 is multi-source Tuner/MP3/USB/SD audio source module offering high quality sound reproduction performance of WAV, WMA, MP3, and AAC format audio file from USB and SD player.
Honeywell Line Control Card has eight 500 mA outputs and it is particularly suitable for handling automatic fire extinguishing systems, where it can be utilized to control extinguishing agent release and directional valves.
The SMS SENTRI2-LPC is an additional loop card for the SENTRI2 fire alarm control panel.
Loop Control Module is found for addressable devices using the SSP protocol.
ThemmO-6SF supervised control circuits occupies its own address on the system’s SLC that allows each to be fully programmable in its control-by-event sequence of operation
The mains powered interface units are EN54-4 compliant battery-backed power supplies that can be directly connected to the loop and also have highly flexible interfacing capability.
Notifier's NC-100 Addressable Control Modules provide NOTIFIER’s FireWarden Series intelligent control panels a supervised Class B of Class A circuit for Notification Appliances.
NFR-M Control Modules are used to increase the number of system input/output signals to ensure fire alarm system response algorithms signalling, as well as its interaction with external systems and equipment.
Noise Control Modules are used to reduce the common noise for example, noise that is present on both conductors on the Signaling Line Circuit (SLC).
The NC-100RA Addressable Relay Module provides NOTIFIER’s FireWarden Series intelligent control panels with two isolated sets of Form-C dry-contact outputs for activating a variety of auxiliary devices such as fans, dampers.
Eltek one channel I/O (input/output) unit DIN rail with an alternating contact for external controls, and an entrance for error message from external equipment
Honeywell S81-F7007 Analog Addressable Device Control Card is for SSP protocol addressable devices. It can manage up to 127 Analog/digital input addressable modules and control modules
SD500-ANM addressable notification modules provide supervised monitoring of wiring to the load devices that require an external power supply to operate such as bells, horns, and strobes.
SK-Control addressable notification modules provide supervised monitoring of wiring to the load devices that require an external power supply to operate such as bells, horns, and strobes.
SK-Control-6 six circuit supervised control module provides supervised monitoring of wiring to load devices that require an external power supply or amplifier to operate.
Intelligent fault isolator modules are addressable and designed for use with the Honeywell Silent Knight® fire alarm control panels. They act as an automatic switch that opens when the line voltage on the signaling line circuit loop drops below 4V.
The SMS SENTRI4-LPC series are spare / replacement loop cards for use with the SMS SenTRI4 fire alarm control panel.
Signal control element devices are the interface between the 600 Series and ILI95-E3 Series® fire alarm control panel's (FACPs) analog circuits and building functions.
Silencing Modules by System Sensor are designed for use on compatible fire alarm panels with 24V DC audible signals or speakers, without the need for separate power to the modules.
The System Sensor’s M500S Supervised Control Modules are intended for use in intelligent, two wire systems, where the individual address of each module is selected using the built-in rotary decade switches.
Time control module is used for the time synchronization of a VARIODYN® D1 alarm/evacuation system via GPS (Global Positioning System).
The VCM was added to the VARIODYN D1 system in accordance with the requirements for EN 54-16 approval. It enables the standardized display of collective messages and has a 5-button operator control panel.
Velociti® Series addressable audio evacuation modules control the communications between the command center and the telephone jacks/warden stations.
XP6-C is six circuit supervised control module which provides intelligent alarm systems with supervised monitoring of wiring to load devices that require an external power supply to operate such as horns, strobes or bells.
The mA Input module has a maximum detector current supply of 500mA and the supply voltage from the controller is 18V DC.
Start your search with category name, product name, part number, etc.
Copyright © 2023 Honeywell International Inc.