You are browsing product catalog for
Addressable monitor module with 10 input circuits, used for the supervision of alarm initiating equipment or technical signals that have a voltage-free contact.
The M500DM module is capable of monitoring two separate Class B circuits simultaneously, making it ideal for waterflow tamper switch and flow switch monitoring.
Addressable two I/O modules combine two relay outputs and two monitor inputs into one module device.
Addressable sub-loop monitor modules are designed for installation in the signaling line circuit of any Gamewell-FCI® analog addressable control panel.
The Gamewell-FCI Velocity® Series, Addressable Dual Monitor Module features two Style B, Class B initiating device circuits, each with an end-of-line resistor.
The Gamewell-FCI Velocity® Addressable Monitor Module provides an address for any device or group of devices connected to this circuit on the signaling line circuit (SLC) of the Gamewell-FCI addressable series fire alarm control panel.
The AMM-4F is an addressable monitor module. The AMM-4F can be configured to provide a single Style D, Class A initiating device circuit (ICD) or a single Style B, Class B IDC with a 47kΩ end-of-line resistor.
FDM-1(A) dual monitor modules supervise circuits of dry contact input devices, such as conventional heat detectors and pull stations, or monitor and power circuits of 2-wire smoke detectors.
The FMM-1 Monitor Module is intended for use in intelligent, two-wire systems, where the individual address of each module is selected using the built-in rotary switches.
Monitor modules supervise a circuit of dry-contact input devices, such as conventional heat detectors and pull stations, or monitor and power a circuit of two-wire smoke detectors.
Intelligent miniature monitor modules are addressable monitor modules intended for use with the Honeywell Silent Knight® fire alarm control panels. They act as an interface to contact devices, such as water flow switches and pull stations.
The Ten Input Monitor module provides an interface between a control panel and normally open contact devices such as pull stations, security contacts, or flow switches.
The M500M Monitor Modules from System Sensor provide a two-wire, or fault-tolerant, initiating circuit for monitoring and operating contact fire alarm and supervisory devices or security devices.
M501 mini monitor modules provide a 2-wire initiating circuit for normally open contact fire alarm and security devices.
MDF-300 dual monitor modules are intended for use with addressable, 2-wire systems. They provide two independent 2-wire initiating device circuits (IDC) at two separate consecutive addresses.
MDF-300(A) addressable monitor modules supervise a circuit of dry contact input devices, such as conventional heat detectors and pull stations, or monitor and power a circuit of 2-wire smoke detectors.
Input monitor modules have 10 inputs and interface between a control panel and normally open contact devices in intelligent alarm systems, such as call points, security contacts, or flow switches.
The MMF-301 monitor module can be installed in a single gang junction box directly behind the monitored unit. Its small size and light weight allow it to be installed without rigid mounting.
ThemmO-6SF supervised control circuits occupies its own address on the system’s SLC that allows each to be fully programmable in its control-by-event sequence of operation
NOTIFIER's intelligent, addressable multiple monitor modules are a convenient space saving platform and allow for additional mounting options.
The multi-mod ten input monitor module that provides ten (10) Style B (Class B) or five (5) Style D (Class A) supervised initiating device circuits (IDC)
NDM -100 Notifier Dual Monitor Module is intended for use in intelligent, two-wire systems. It provides two independent two-wire initiating device circuits (IDCs) at two separate, consecutive addresses.
NMM-100(A) is a standard-sized module that supervises either a Style D (Class A) or Style B (Class B) circuit of dry-contact input devices.
The NMM-100-10 Ten Input Modules are interface modules between FireWarden series control panel and normally open contact devices in intelligent alarm systems.These modules have panel-controlled green LED indicators.
SD500 addressable miniature input modules act as an interface to dry contact devices, such as water flow switches and conventional pull stations. Due to their small size, the modules can be mounted in a single-gang junction box.
SD500-AIM addressable input modules are for use with FACPs. SD500-AIM addressable input modules are designed to be used with pull stations, water flow switches, and other applications requiring dry contact alarm initiation devices.
Intelligent 10-input monitor modules are designed for use with Honeywell Silent Knight® Series fire alarm control panels. Each monitor module is intended to interface between a control panel and a normally open contact device.
Intelligent monitor modules are addressable and designed for use with Silent Knight® Series FACPs. They are intended to function with 2-wire systems, where the individual address of each module is selected using the built-in rotary switches.
Addressable dual monitor modules come equipped with two initiating circuits that are designed to be used with the Honeywell Silent Knight® Series fire alarm control panels (FACPs).
The SWIFT® wireless modules are intelligent addressable modules which provide secure, reliable communication to the Fire Alarm Control Panel (FACP) across a Class A mesh network.
Flash Scan Wireless Monitor modules is used to monitor devices with mechanical contact actuation. Includes a special cover with a built-in tamper magnet.
SWIFT® wireless monitor modules are used to monitor devices with mechanical contact actuation. They come with special covers that have built-in tamper magnets. For best performance use SWIFT® wireless monitor modules with SMB500-WH boxes.
Serial and parallel gateway modules allow you to connect virtually any standard PC-compatible printer to a Silent Knight® Series fire alarm control panel (FACP) and to generate reports on site.
WAM-MM SWIFT® wireless monitor modules are intended for use with a wireless gateway to interface with devices that use contacts to signal status conditions, such as security contacts, water flow switches, or pull stations.
The Notifier XP10-M ten-input monitor module is an interface between a control panel and normally open contact devices in intelligent alarm systems such as manual call points, break glass alarms, or flow switches.
Start your search with category name, product name, part number, etc.
Copyright © 2023 Honeywell International Inc.