The M500DM module is capable of monitoring two separate Class B circuits simultaneously, making it ideal for waterflow tamper switch and flow switch monitoring.
Addressable two I/O modules combine two relay outputs and two monitor inputs into one module device.
Addressable sub-loop monitor modules are designed for installation in the signaling line circuit of any Gamewell-FCI® analog addressable control panel.
Addressable dual monitor modules come equipped with two initiating circuits that are designed to be used with the Honeywell Silent Knight® Series fire alarm control panels (FACPs).
The Gamewell-FCI Velocity® Series, Addressable Dual Monitor Module features two Style B, Class B initiating device circuits, each with an end-of-line resistor.
The Gamewell-FCI Velocity® Addressable Monitor Module provides an address for any device or group of devices connected to this circuit on the signaling line circuit (SLC) of the Gamewell-FCI addressable series fire alarm control panel.
The AMM-4F is an addressable monitor module. The AMM-4F can be configured to provide a single Style D, Class A initiating device circuit (ICD) or a single Style B, Class B IDC with a 47kΩ end-of-line resistor.
Intelligent 10-input monitor modules are designed for use with Honeywell Silent Knight® Series fire alarm control panels. Each monitor module is intended to interface between a control panel and a normally open contact device.
Intelligent miniature monitor modules are addressable monitor modules intended for use with the Honeywell Silent Knight® fire alarm control panels. They act as an interface to contact devices, such as water flow switches and pull stations.
Intelligent monitor modules are addressable and designed for use with Silent Knight® Series FACPs. They are intended to function with 2-wire systems, where the individual address of each module is selected using the built-in rotary switches.
The M500M Monitor Modules from System Sensor provide a two-wire, or fault-tolerant, initiating circuit for monitoring and operating contact fire alarm and supervisory devices or security devices.
M501 mini monitor modules provide a 2-wire initiating circuit for normally open contact fire alarm and security devices.
MDF-300 dual monitor modules are intended for use with addressable, 2-wire systems. They provide two independent 2-wire initiating device circuits (IDC) at two separate consecutive addresses.
ThemmO-6SF supervised control circuits occupies its own address on the system’s SLC that allows each to be fully programmable in its control-by-event sequence of operation
The multi-mod ten input monitor module that provides ten (10) Style B (Class B) or five (5) Style D (Class A) supervised initiating device circuits (IDC)
SD500 addressable miniature input modules act as an interface to dry contact devices, such as water flow switches and conventional pull stations. Due to their small size, the modules can be mounted in a single-gang junction box.
SD500-AIM addressable input modules are for use with FACPs. SD500-AIM addressable input modules are designed to be used with pull stations, water flow switches, and other applications requiring dry contact alarm initiation devices.
SD500-ANM addressable notification modules provide supervised monitoring of wiring to the load devices that require an external power supply to operate such as bells, horns, and strobes.
SD500-SDM addressable 2-wire smoke detector modules allow IntelliKnight® fire alarm controls to interface and monitor 2-wire conventional smoke detectors.
SWIFT® wireless monitor modules are used to monitor devices with mechanical contact actuation. They come with special covers that have built-in tamper magnets. For best performance use SWIFT® wireless monitor modules with SMB500-WH boxes.
Serial and parallel gateway modules allow you to connect virtually any standard PC-compatible printer to a Silent Knight® Series fire alarm control panel (FACP) and to generate reports on site.
The Ten Input Monitor module provides an interface between a control panel and normally open contact devices such as pull stations, security contacts, or flow switches.
Two relay output dual monitor modules are intended for use with intelligent, 2-wire systems, where the individual address of each module is selected using the built-in rotary decade switches.
WAM-MM SWIFT® wireless monitor modules are intended for use with a wireless gateway to interface with devices that use contacts to signal status conditions, such as security contacts, water flow switches, or pull stations.
Start your search with category name, product name, part number, etc.
Copyright © 2022 Honeywell International Inc.