10-way relay control (output) card (unboxed PCB.)
The 16 Relay Card is used for NFG-8 gas detection control panel. The relay card is 6A, 250V AC contact capacity with connectable by flat cable.
Dual Input/1 relay Output modules by NOTIFIER provides an unmonitored single pole volt-free changeover contact for external devices, granting maximum flexibility to a NOTIFIER fire detection and alarm system.
2-way relay board for BMZ series NFS
4XZM zone relay modules provide four Form C relay contacts to fire alarm control panels (FACPs).
4X™F transmitter modules provide output for local energy municipal box transmitters, and alarm and trouble reverse polarity circuits. The modules include a disable switch and disable trouble LED.
MI-CR6-S2I Multi Module is an Addressable control module with 6 output circuits in NO/NC relay form. This module is recommended for activation through the communications loop of doors, fire dampers, lift stops, etc.
8 way input/output cards Provide up to 8 configurable relay outputs or up to 4 command inputs and 4 outputs.
Output modules allows the control of auxiliary devices such as fire shutters or sounders. They includes a custom low profile surface-mounting box with several options for fixing. A single tri-color LED indicates the status of the module.
The AOM-2RF Module is designed for installation in the signaling line circuit of any Gamewell-FCI analog addressable fire alarm control panel
The Gamewell-FCI Model ARB Auxiliary Relay Board provides a Form “C control output for the purpose of operating auxiliary circuits used in conjunction with fire alarm applications.
Basic Bases are intended for connection of ECO1000 series fire detectors to control panels of fire and security in a 2 wire or 4 wire circuit with separate power and signal circuit. They have a function of automatic reset the fire mode the detector.
CRF-300 addressable relay modules provide a dry-contact output for activating a variety of auxiliary devices, such as fans, door holders, dampers, control equipment, etc.
Relay Module by Morley-IAS can be independently configured and linked to 12 configurable activation matrices. It is installed inside the control panel.
The status display module provides outputs and control functions for remote annunciation of alarm, trouble, and supervisory for each zone. The system can supervise up to eight GWIOM-410 status display modules.
Door Management Modules by Notifier are connectable to the terminals via the local data Bus.
Multi-voltage conventional relays are used for high-current switching applications such as fan and damper assembly control, door control, air handling unit controls, and other types of system interfacing.
The LWL-Switch is used for designing an ethernet network in loop topology. On account of the loop structure, the network is fully redundant since, in the case of an LWL fibre rupture.
The Addressable Control Module provides Honeywell intelligent fire alarm control panels a circuit for Notification Appliances (horns, strobes, speakers, etc.).
The Flex GF506R is a six-zone FACP used for single and dual hazard agent releasing applications. The Flex GF506R provides reliable fire detection.
The FireLite Four Position SPDT Relay suited for applications where local contacts are required for system status, remote contacts for control of electrical loads, and general purpose switching.
The Notifier intelligent addressable relay module is desiged to provide the system with a dry-contact output for activating a variety of auxiliary devices, such as fans, dampers, control equipment and is highly reliable.
The I/O Accessory and Expansion card provides 4 inputs and 4 relay outputs. It supports both DC and AC output voltages and provides a USB port as well.
Essers’s indicating & operating panels provide microprocessor-controlled interface for networked fire alarm control panels. Its programming can be done with System 8000 customer data editor. It has TTY or RS485 interface to connect remote printers.
The IntelliKnight Relay Control Modules have been designed for use with Silent Knight Model 5600 IntelliKnight series fire alarm control panel where the individual address of each module is selected using the built in rotary switches.
Intelligent alarm system control modules have six relays or circuits that are intended for use in intelligent alarm systems and for switching applications.
ThemmO-6SF supervised control circuits occupies its own address on the system’s SLC that allows each to be fully programmable in its control-by-event sequence of operation
MR Series multi-voltage 4-position DPDT control relays offer 10A contacts, which may be operated by one of four input control voltages.
MR Series multi-voltage single DPDT control relays offer 10A contacts, which may be operated by one of four input control voltages.
MR Series multi-voltage single SPDT control relays offer 10A contacts, which may be operated by one of four input control voltages.
The multi-mod six relay output module that provides six (6), individually addressed, Form "C" control really outputs on one board. The MMO-6RF is compatible with the E3 Series, S3 Series, and 7100 Series Fire Alarm Control Panels.
Multi-voltage conventional relays are used for high-current switching applications such as fans and damper assembly controls, door controls, air handling unit controls, and other types of system interfacing.
Non Scanner Relay Processor Module (DRP) is required if remote relays are not used with display.
The Notifier relay modules provides 10 programmable form-C relays when used with a compatible FACP (Fire Alarm Control Panel).
OUD32R Base peripheral has 32 OC outputs for relay control. It manages the MORS-1, MORS-2 and MORS-3 relay boards on 4 flat cables with 12V DC power supply.
PAM multi-voltage relay modules are ideal for applications where remote relays are required for control or status feedback.
Reversing relay and synchronization modules enhance the operation of 2- and 4-wire i³™ Series detectors equipped with a sounder.
The FRM-1 Relay Control Module is intended for use in intelligent, two-wire systems where the individual address of each module is selected using the built-in rotary switches.
Relay Modules by Honeywell has polarity independent changeover relays, LED indication when activated and possibility for both positive and negative triggering.
Relay module with freely programmable output functions, each of which can operate as an NC or NO contact (not monitored) for potential-free activation.
VESDAnet sockets interface are required when a standard unit is used to provide a flexible solution where permanent mounting is not required in this case VESDAnet sockets connects the HLI onto the VESDAnet network.
Intelligent relay modules are addressable and designed for use with Honeywell Silent Knight® Series fire alarm control panels (FACPs). They allows Silent Knight FACPs to switch discrete contacts through code commands.
Addressable 6-relay control modules are designed for use with Honeywell Silent Knight® Series fire alarm control panels (FACPs). They come equipped with six Form C relays and allow the FACP to switch discrete contacts through a code command.
SMART3/SMARTS 3-Relay Boards have been designed for SMART3/SMARTS gas detectors and allows the detector to be provided with tension free changeover contacts.
SWIFT® WSK-RELAY wireless relay modules allow control panels to switch contacts by code command.
Scanner Relay Processor Module (DRP) is required if remote relays are not used with display.
TC800 Series family is the new family of input/output modules. It has single and multi-way models within the same mechanical package, reducing both the cost of installation and the mounting space required.
The TBZ Trouble-by-Zone annunciator module contains four, independently controlled output relays, each of which are activated upon a zone trouble condition.
VESDA VRT-500 is a Remote Mount Relay Module. It is designed for use with VLP, VLS and VLC detectors. The relay module is a 7 relay remote termination card with specialized software.
WAM-RC SWIFT® wireless modules are intelligent (addressable) modules that provide secure, reliable communication to the fire alarm control panel (FACP) across a Class A mesh network.
Start your search with category name, product name, part number, etc.
Copyright © 2022 Honeywell International Inc.