005883 relay interface boards provide 10 general purpose Form C relays that can be used to control any device that requires a dry contact closure.
Notifire offers 10 relay outputs module. The output of each module is a voltage free switch contact designed to switch resistive loads up to 2A/30 Vdc.
The 16 Relay Card is used for NFG-8 gas detection control panel. The relay card is 6A, 250V AC contact capacity with connectable by flat cable.
Dual Input/1 relay Output modules by NOTIFIER provides an unmonitored single pole volt-free changeover contact for external devices, granting maximum flexibility to a NOTIFIER fire detection and alarm system.
2-way relay board for BMZ series NFS
M500R relay control modules contain two isolated sets of Form C contacts, which operate as a DPDT switch. The modules allow the control panel to switch these contacts on command. No supervision is provided for the notification appliance circuit.
MI-CR6-S2I Multi Module is an Addressable control module with 6 output circuits in NO/NC relay form. This module is recommended for activation through the communications loop of doors, fire dampers, lift stops, etc.
8 way input/output cards Provide up to 8 configurable relay outputs or up to 4 command inputs and 4 outputs.
Output modules allows the control of auxiliary devices such as fire shutters or sounders. They includes a custom low profile surface-mounting box with several options for fixing. A single tri-color LED indicates the status of the module.
Addressable 6-relay control modules are designed for use with Honeywell Silent Knight® Series fire alarm control panels (FACPs). They come equipped with six Form C relays and allow the FACP to switch discrete contacts through a code command.
Addressable 6-zone interface modules transmit the status of 2-wire detector zones to Silent Knight® fire alarm control panels (FACPs). Status conditions are reported as normal, open, or alarm.
Addressable Output Module is loop powered devices controlling an unsupervised double pole relay output.
Farenhyt Addressable Relay Modules are addressable relay modules with six Form-C relays for use with Silent Knight IFP-series fire alarm control panels to switch discrete contacts by code commands.
Alarm and monitoring module for IQ8TAM, IQ8TAL, IQ8FCT XS/LP
The Gamewell-FCI Model ARB Auxiliary Relay Board provides a Form “C control output for the purpose of operating auxiliary circuits used in conjunction with fire alarm applications (ie fan and smoke controls, door holders, annunciators, etc.).
Basic Bases are intended for connection of ECO1000 series fire detectors to control panels of fire and security in a 2 wire or 4 wire circuit with separate power and signal circuit. They have a function of automatic reset the fire mode the detector.
CRF-300 addressable relay modules provide a dry-contact output for activating a variety of auxiliary devices, such as fans, door holders, dampers, control equipment, etc.
Controller Modules by Notifier are external box connectable via RS485 to the DVR to connect locally.
Conventional Fire Alarm Control Panels by Gamewell-FCI are ideal fire panel that can be used for a wide range of different sized installations such as hotels, schools, correctional institutions, health care facilities, and manufacturing plants.
Relay Module by Morley-IAS can be independently configured and linked to 12 configurable activation matrices. It is installed inside the control panel.
Door Management Modules by Notifier are connectable to the terminals via the local data Bus.
Multi-voltage conventional relays are used for high-current switching applications such as fan and damper assembly control, door control, air handling unit controls, and other types of system interfacing.
The LWL-Switch is used for designing an ethernet network in loop topology. On account of the loop structure, the network is fully redundant since, in the case of an LWL fibre rupture.
The Gent Xenex XEN-FFR Fire Fault Relay is designed to either add an additional fire and fault relay or provide a remote fire/fault relay from the main control panel.
The Addressable Control Module provides Honeywell intelligent fire alarm control panels a circuit for Notification Appliances (horns, strobes, speakers, etc.).
The FireLite Four Position SPDT Relay suited for applications where local contacts are required for system status, remote contacts for control of electrical loads, and general purpose switching.
The Notifier intelligent addressable relay module is desiged to provide the system with a dry-contact output for activating a variety of auxiliary devices, such as fans, dampers, control equipment and is highly reliable.
The I/O Accessory and Expansion card provides 4 inputs and 4 relay outputs. It supports both DC and AC output voltages and provides a USB port as well.
IDP Addressable Relay Module allows a Silent Knight FACP to switch discrete contacts by code command The relay contains two isolated sets of Form C contacts, which operate as a DPDT
Module with 1 technical input plus 1 relay output with built-in loop short-circuit isolator, for connection to the esserbus fire detection loop without the need for external power.
Essers’s indicating & operating panels provide microprocessor-controlled interface for networked fire alarm control panels. Its programming can be done with System 8000 customer data editor. It has TTY or RS485 interface to connect remote printers.
Intelligent alarm system control modules have six relays or circuits that are intended for use in intelligent alarm systems and for switching applications.
Intelligent relay modules are addressable and designed for use with Honeywell Silent Knight® Series fire alarm control panels (FACPs). They allows Silent Knight FACPs to switch discrete contacts through code commands.
MR Series multi-voltage 4-position DPDT control relays offer 10A contacts, which may be operated by one of four input control voltages.
MR Series multi-voltage DPDT control relays offer 10A contacts, which may be operated by one of four input control voltages.
MR Series multi-voltage single DPDT control relays offer 10A contacts, which may be operated by one of four input control voltages.
MR Series multi-voltage single SPDT control relays offer 10A contacts, which may be operated by one of four input control voltages.
Multi-mod relay output modules provide six Form C control relay outputs on one board.
Multi-voltage conventional relays are used for high-current switching applications such as fans and damper assembly controls, door controls, air handling unit controls, and other types of system interfacing.
Non Scanner Relay Processor Module (DRP) is required if remote relays are not used with display.
The NC-100RA Addressable Relay Module provides NOTIFIER’s FireWarden Series intelligent control panels with two isolated sets of Form-C dry-contact outputs for activating a variety of auxiliary devices such as fans, dampers.
OUD32R Base peripheral has 32 OC outputs for relay control. It manages the MORS-1, MORS-2 and MORS-3 relay boards on 4 flat cables with 12V DC power supply.
PAM multi-voltage relay modules are ideal for applications where remote relays are required for control or status feedback.
Reversing relay and synchronization modules enhance the operation of 2- and 4-wire i³™ Series detectors equipped with a sounder.
Relay control element devices are the interface between the Gamewell-FCI®, 600 Series, and IL95-E3 Series® fire alarm control panel (FACP) analog circuits and building functions such as door holders, elevators, dampers, motors, and disconnects.
The AOM-2RF Module is designed for installation in the signaling line circuit of any Gamewell-FCI analog addressable fire alarm control panel
The FRM-1 Relay Control Module is intended for use in intelligent, two-wire systems where the individual address of each module is selected using the built-in rotary switches.
Relay Modules by Honeywell has polarity independent changeover relays, LED indication when activated and possibility for both positive and negative triggering.
Relay module with freely programmable output functions, each of which can operate as an NC or NO contact (not monitored) for potential-free activation.
VESDAnet sockets interface are required when a standard unit is used to provide a flexible solution where permanent mounting is not required in this case VESDAnet sockets connects the HLI onto the VESDAnet network.
SD500-ARM addressable relay modules add two Form C contacts to the Farenhyt„¢ addressable system.
SMART3/SMARTS 3-Relay Boards have been designed for SMART3/SMARTS gas detectors and allows the detector to be provided with tension free changeover contacts.
Scanner Relay Processor Module (DRP) is required if remote relays are not used with display.
System Sensor multiple input and output modules are designed to meet a range of applications in which numerous single modules are used.
TC800 Series family is the new family of input/output modules. It has single and multi-way models within the same mechanical package, reducing both the cost of installation and the mounting space required.
The TBZ Trouble-by-Zone annunciator module contains four, independently controlled output relays, each of which are activated upon a zone trouble condition.
VESDA VRT-500 is a Remote Mount Relay Module. It is designed for use with VLP, VLS and VLC detectors. The relay module is a 7 relay remote termination card with specialized software.
Start your search with category name, product name, part number, etc.
Copyright © 2022 Honeywell International Inc.