https://buildings.honeywell.com/us/en/search-results.html

Zone Modules

Multi-Mod Six Zone Interface Module

The multi-mod six zone interface module that provides six (6) Style B (Class ,B) or three (3) Style D (Class A), supervised initiating device circuits (IDC).

The Velocity® Series, multi-mod six zone interface module (MMI-6SF) provides six Style B (Class B) or three Style D (Class A) supervised initiating device circuits (IDC) suitable for use with UL® Listed conventional 2-wire smoke detectors as well as any normally open contact device. The Velocity® Series use a communication protocol that substantially increases the speed of communication between the sensors and certain Gamewell-FCI analog addressable fire alarm controls. These devices operate in a grouped fashion. If one of the devices in the group has a status change, the panel’s microprocessor stops the group poll and concentrates on the single device. The net effect is response speed up to five times greater than earlier designs.

Features & Benefits:
  • Each MMI-6SF module provides six (6), Style B (Class B) or three (3), Style D (Class A) individually addressable individually programmable initiating Device circuits
  • Suitable for use with UL® Listed, compatible 2-wire conventional smoke sensors and normally open contact devices
  • Removable wiring terminal blocks allow ease of installation and servicing terminal
  • Blocks can accommodate 12 to 18 AWG wire
  • Flexible jumper configuration feature allowing one or two monitoring circuit addresses to be disabled
  • Individual LED indicators*
  • Ideal for retrofit applications
  • As many as thirty-six (36), initiating device circuits in one 12” x 24” x 6.5” cabinet
  • Two (2), mounting cabinets available for two (2), (MBB-2 cabinet) to six (6), (MBB-6 cabinet) units
  • Bicolor LEDs flash green whenever the sensor is addressed, and light steady red on alarm*
  • *Note: Only the red LED is operative in panels that do not operate in Velocity® mode.
Certifications:
  • UL: S1913
  • FM: 3023594
  • MEA FDNY: 219-02-E Vol. IV
  • CSFM: 7300-1703:0124
  • ISO 9001 Certification

Others

  • Cabinet Height
    • 12.63 inch
  • LED Current
    • 40 milliampere
  • Normal Input Current
    • 2 milliampere
  • Minimum External Power Supply Voltage
    • 18 DC volt
  • Maximum Operating Humidity
    • 85 Percentage
  • End of Line Resistance
    • 3.9 kO
  • Alarm Current
    • 40 milliampere
  • Cabinet Depth
    • 6.5 inch
  • Cabinet Width
    • 24 inch
  • Maximum Operating Voltage
    • 15 - 32 DC volt
    • 15 DC volt
  • Mounting Type
    • Cabinet-Mount
  • Minimum Wire Gauge
    • 18
  • Maximum IDC Wiring Resistance
    • 25ohm
  • Supported Wiring Configuration
    • Class B
  • Product Type
    • Interface Module
  • Number of inputs
    • Class A
    • 6
    • 3 Class B
  • LED Circuit-Status Indicators
    • 6
  • Number of Zones
    • 6
  • Maximum Wire Gauge
    • 12
  • Approved Location
    • CSFM 7300-17030124
    • MEA FDNY 219-02-E Vol IV
    • UL S1913
    • FM 3023594

Others

  • Cabinet Height
    • 12.63 inch
  • LED Current
    • 40 milliampere
  • Normal Input Current
    • 2 milliampere
  • Minimum External Power Supply Voltage
    • 18 DC volt
  • Maximum Operating Humidity
    • 85 Percentage
  • End of Line Resistance
    • 3.9 kO
  • Alarm Current
    • 40 milliampere
  • Cabinet Depth
    • 6.5 inch
  • Cabinet Width
    • 24 inch
  • Maximum Operating Voltage
    • 15 - 32 DC volt
    • 15 DC volt
  • Mounting Type
    • Cabinet-Mount
  • Minimum Wire Gauge
    • 18
  • Maximum IDC Wiring Resistance
    • 25ohm
  • Supported Wiring Configuration
    • Class B
  • Product Type
    • Interface Module
  • Number of inputs
    • Class A
    • 6
    • 3 Class B
  • LED Circuit-Status Indicators
    • 6
  • Number of Zones
    • 6
  • Maximum Wire Gauge
    • 12
  • Approved Location
    • CSFM 7300-17030124
    • MEA FDNY 219-02-E Vol IV
    • UL S1913
    • FM 3023594
  • Mounting Type : Cabinet-Mount
  • Minimum Wire Gauge : 18
  • Maximum IDC Wiring Resistance : 25ohm
  • Supported Wiring Configuration : Class B
  • Product Type : Interface Module
  • Number of inputs : Class A|6|3 Class B
  • LED Circuit-Status Indicators : 6
  • Number of Zones : 6
  • Maximum Wire Gauge : 12
  • Approved Location : CSFM 7300-17030124|MEA FDNY 219-02-E Vol IV|UL S1913|FM 3023594
  • Maximum Operating Voltage : 15 - 32 DC volt|15 DC volt
  • Cabinet Height : 12.63 inch
  • LED Current : 40 milliampere
  • Normal Input Current : 2 milliampere
  • Minimum External Power Supply Voltage : 18 DC volt
  • Maximum Operating Humidity : 85 Percentage
  • End of Line Resistance : 3.9 kO
  • Alarm Current : 40 milliampere
  • Cabinet Depth : 6.5 inch
  • Cabinet Width : 24 inch
Sort
Others
Document Title
File Size
Date Added
Asset Language
Content Type
Brochure
Document Title
File Size
Date Added
Asset Language
Content Type
Data Sheet
Document Title
File Size
Date Added
Asset Language
Content Type
Catalog
Document Title
File Size
Date Added
Asset Language
Content Type
Image
SKU
Description
alt
MMI-6SF
Multi-Mod 6 Zone Interface Module, 5 to 32V DC, 0 to 49C