You are browsing product catalog for
The Fire-Lite FL2-LT-XP control panels have been designed to be easy to use and program, providing efficient and safe product. The control panel can support an unlimited number of manual call points and a limited number of detectors by zone.
5140MPS manual fire alarm pull stations are designed to be non-code single action devices for use in UL Listed fire alarm applications.
Call station 586309 is designed to maintain duplex communication between the operator of the VoCALL system and the subscriber on the side of the outdoor panel.
9302 KAC Switch
The call points are an addressable break glass manual call points which has a simple rotary decade switch at the rear of the unit for addressing.
Addressable Manual Call Point is an MCP that has a simple rotary decade switch at the rear of the unit for addressing. Call Point is designed to provide a manual alarm interface to Morley IAS’s fire alarm control panel.
The Notifier Addressable call point is a non coded, manual call point. It provides NOTIFIER intelligent fire alarm control panels (FACP) with one addressable alarm initiating point. The F/MCP/GLASS is compatible with all Notifier intelligent panels
Addressable Manual Pull Stations are state-of-the-art, dual-action that includes an addressable interface with Intelligent Fire Alarm Control Panels. Control Panels can display the exact location of the activated manual station.
The Notifier addressable manual pull stations are state-of-the-art, dual-action (i.e., requires two motions to activate the stations) pull stations that includes an addressable interface and the NSP-25 panel.
Addressable Pull Stations by Farenhyt are active fire protection devices and are designed to work with Silent Knight IFP-series fire alarm control panels.
The system sensor addressable waterproof call points are designed to be used as components of a compatible fire control system using System Sensor analogue addressable devices. It can be installed externally or internally being truly weatherproof.
Alertus Two-Way Alerting and Emergency Call Station used for Indoor and Outdoor
BG-12 Series fire alarm pull stations are designed to meet multiple applications with the installer and end user in mind. They feature a variety of models including single- and dual-action versions.
BG-8 Manual Pull Stations from Fire-Lite Alarms are metal pull stations that offers a single-action, normally-open contact alarm initiating point for use with UL listed Fire Alarm Control Panels.
The System sensor radio call points are battery operated RF devices designed for use with the M200G-RF radio gateway. It is a break-glass manual call point, combined with a wireless RF transceiver and has a removable backplate.
The Fire-Lite FL4-LT-XP control panels have been designed to be easy to use and program, providing efficient and safe product. The control panel can support an unlimited number of manual call points and a limited number of detectors by zone.
Conventional MCP are with plastic triggering element, which supports easy reset after an alarm has been triggered without having to replace the broken element (glass pane).
The conventional manual call points with alarm buttons are designed for indoor or outdoor uses in conventional systems such as Eltek's ZLX, ANX and BSX100 systems. They are easy to install and cost-effective.
The conventional manual call points are designed to provide manual alarm interface to non-intelligent fire alarm control panels. They provide unique plug and play concept design which reduces installation time.
The Eltek’s Dispos surface wall mounting exit sign luminaires come with the display panes. It has rectangular body with posted line on all sides.
EM-40 are manual call point for BSX 40
Electronic Modules are designed to be controlled with 12 volt circuit e.g. system 8000 / IQ8Control via transponder or Fire Alarm Control Panel.
Explosion-Proof encapsulated conventional MCP for hazardous areas in conformity with EN 54-11 Type B for the manual actuation of a fire alarm and/or a hazard alarm, as a detector for usage in explosion-hazardous areas both inside and outside.
FI-MPS Conventional Series manual stations are made of high quality, die-cast metal and include screw terminal connections, a hex key for reset, and an integrated break glass rod.
GWMPS Series Pull Stations are either single or dual action configurations with terminal strip connections. The normally open contact, which closes when the pull station is activated.
The Gamewell-FCI MS-95/MS-95T Addressable Manual Pull Station is a non-coded, single-action, manual pull station with a key-lock reset feature. Its rugged toggle switch design offers exceptional resistance to accidental alarms
The new range of conventional manual call points from Gent by Honeywell simplifies installation time.
Gent conventional manual call points are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting.
WCP Outdoor Call Points are Resistor & Clean Contact Model. Installation efficiency, flexibility and full compliance with the latest standards are at the heart of the new WCP Outdoor Call Point range.
The HAZWP Model Fire Alarm Pull Station is specifically designed for harsh industrial environments where weatherproofing and corrosion are issues.
Gent’s range of conventional manual call points are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour.
Pull Cord Pushbutton Switches are used for connection to the complete call device WC SET and they are flush-mounted devices completes with combination central plate. They are available for surface and ceiling-mounting.
IP 67 SenTRI Manual Call Points are addressable call points as fire alarm system with a response time of less than 3 seconds.
IQ8 manual call points are suitable for esser bus and powered loop connection, with soft address coding, alarm latch and alarm indicator.
The electronic modules for IQ8 manual call points cover a wide range of application areas and are connected as esserbus or powered loop users via the 8000 and IQ8Control fire alarm system loops.
The Morley-IAS integrated detector base sounder strobes are installed in exactly the same manner as intelligent detector. With piezoelectric transducer and high impact LED array technology, it is highly efficient.
KAC’s range of switches provide you with the most comprehensive range of switching product solutions for fire, security and other specialist applications.
Waterproof Call Point by KAC is an IP67 sealed manual call point product. The WCP4A product version is supplied with a double pole changeover set of contacts.
KILLARK® XAL-53 explosion-proof pull stations are suitable for use in hazardous areas due to the presence of flammable gases or vapors, combustible dust, or easily ignitable fibers.
The XENS-807 is a Gent keyswitch call point. This unit allows the activation of a fire alarm system using a key supplied with the unit.
MCP Indoor Call Point by KAC has a unique plug and play concept designed specifically to reduce installation time. Simple, but effective, with no re-termination required and no time wasted.
Addressable Waterproof Call Points are available with or without an integral isolator and are designed to provide a manual alarm interface to Notifier fire alarm control panels.
MCP range by KAC directly reflects the need of installation time and ultimately cost of paramount importance to any fire or security installer by providing a unique ‘plug and play’ concept designed specifically to reduce installation time.
MCP products utilise a special terminal block, where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP
MCP Tamper Protection for manual call point Used to prevent unnecessary activation of manual detectors due to vandalism.
MCP Electronic Modules are available in two types Conventional MCP and IQ8 MCP. MCP Modules use as the detectors in the fire detection and fire alarm systems.
MCP Electronic Modules are designed for FACP 80 Control Panels.
The MCP1A product version of Indoor Callpoint is supplied with both a resistor and normally open clean contact electrical options.
MCP2A Indoor Call Ponit
MCP3A Indoor Call Point range gives you installation efficiency, flexibility and full compliance with the latest standards.
The Manual Call Points are designed to provide a manual alarm interface to conventional fire alarm control panel. Manual Call Points offers flexible and break glass element option and available in red, yellow, green and white colour.
The MCP5A product has the Advanced Protocol embedded. A version of this call point with built in isolation is also available.
The MS-2 Manual Fire Alarm Stations are dual action devices. These stations require that the outer door be lifted to expose the actuation door which is then pulled forward to operate the alarm toggle switch.
The MS-6 Stations are single action device, requiring only the pulling of the action door to release the compressed button switch. It is available either with terminals or wire leads.
The MS-7 series is a family of addressable manual pull stations designed to be installed in the signaling line circuit (SLC) of a Gamewell-FCI addressable fire alarm control panel
Manual Call Points from SMS are both with a 470 Ohm resistor and Normally Open contact, complete with glass. Available in semi-flush mounting or surface mounting options to offer a manual alarm interface to non addressable fire alarm control panels.
Every Manual Call Points With Resettable Elements are continuously monitored ensuring that the triggers are responded to in less than one second system wide.
Notifier manual release call points are class B call points which have key for reset and enclosure opening. It has operating temperature of -10°C to +50°C. It is made from durable and impact resistant PC ASA plastic.
Manual Release Trigger is 2-stage manual firing box for firing fire extinguishing systems.
NBG-12 Series fire alarm pull stations are designed to meet multiple applications with the installer and end user in mind.
The Notifier NBG-12LX is a state-of-the-art, dual-action pull station.
The NOTIFIER NBG-12 Series is a cost-effective, feature-packed series of non-coded manual fire alarm pull stations.
The NBG-12LRA and NBG-12LR are ideal for areas such asclean rooms and computer rooms where a chemical agent isused to extinguish a fire.
NO/NC contact model WCP3A outdoor WCP call points are supplied with one normally open and one normally closed contact with enhanced environmental protection.
Miniature Momentary Action Push Switches are flush mounted and consist of ABS material. Miniature Push Switches are non-terminated and available in green colour.
The PS-DA pull station is a non-coded, dual-action manual pull station with a key-lock reset feature.
The PS-SA pull station is a non-coded, single-action manual pull station with pigtail connections and a key-lock reset feature.
Push Button Series EFD
The Chubb’s call points are radio manual call points. It allows an alarm to be taken into account following manual action. It makes of testing by plastic key possible without opening the case. It is made from impact resistant ABS material.
Outdoor WCP call points are IP67 sealed manual call point products provided with enhanced environmental protection. WCP call points are true water proof and outdoor products.
XP95 Manual Detectors is a Manual Detector with high degree of tightness and protective cover. Alarm can be given without risk of cuts.
The Honeywell remote call stations are used to perform various broadcasts, live announcement in zones. It has temporary recording function. It supports extension key modules as required. Up to 6 remote call stations can be connected to the system.
The Empertech KB-D10R Remote Paging Microphone works together with the KB-D10P Paging Selector & easily operated by pressing the zone selector buttons on the panel to access the corresponding zone of the KBD10P to achieve remote paging to every zone.
PS-AWRC-029 is a Replacement Hex Key for Pull station.
The resettable manual call points are exclusively use for indoor applications. These call points includes three types of selection activation, by zener diode, or bye NO/NC contact or by 470 ohm resistance.
Manual Call Points by Gent covered is suitable for installation in GENT analogue addressable fire alarm system.
Addressable manual pull stations are a single action or dual action addressable manual fire alarm pull stations for use with IntelliKnight® fire control panels.
SK-PULL intelligent pull stations are for use with Silent Knight® Series fire control panels (FACPs).
SM950B-20C single-action pull stations are non-coded, manual initiating alarm pull stations with normally open contacts. These pull stations also have an additional normally closed contact.
Model M46-28 has a N/O alarm contact with 4-wire leads for in and out connections. Model M46-29 and M46-30 use screw terminals for in and out alarm connections and an extra Form C auxiliary contact.
SWIFT® W-BG12 addressable wireless pull stations are dual-action, manual pull stations with a key-lock reset feature that provides one addressable alarm initiating input.
SWIFT Wireless Addressable Devices is your turnkey solution for fire protection, emergency communications and CO detection all in one easy to use package . SWIFT Wireless Addressable Devices has always focused on functionality and flexibility
SenTRI manual call points are used for analogue addressable fire systems, manual call points are designed with a response time of less than 3 seconds.
SenTRI surface mounted key switch manual call points are used for analogue addressable fire systems, manual call points are designed with a response time of less than 3 seconds.
The Sentri by Honeywell brings a range of fully equipted equipted manual call points with resetable elements that sets an alarm during a fire emergency and can be reset again.
Special breaking glasses are used as a replacement glass for C-2498 control unit for operating the emergency doors.
The Gent standard call points are break glass and key operated call points available for use with the System 800 control panels. The key operated call point prevents unauthorised operation in areas with a high risk of tampering or vandalism.
The Steel-to-Polyethylene Transition Fitting connect with safety, integrity and speed. It provides simple and compact installations.
The Surface Mounted Manual call points by Gent are manufactured from ABS with plastic covered push break glass. This provides the system with safe and simple operation.
WCP outdoor call points are provided with installation efficiency, flexibility and full compliance with the latest standards. The enhanced environmental protection allows the manual call points to be installed in many external environments.
WCP1A Outdoor Call Point range gives you installation efficiency, flexibility and full compliance with the latest standards. The WCP1A series is supplied with both a resistor and normally open clean contact electrical options.
WCP3A Outdoor Call Point range gives you installation efficiency, flexibility and full compliance with the latest standards.
WCP5A Outdoor Call Point range gives you installation efficiency, flexibility and full compliance with the latest standards. The WCP5A series is supplied with both a resistor and normally open clean contact electrical options.
WPS-DL SWIFT® wireless pull stations are dual-action devices and have a key-lock reset feature that provides one addressable alarm initiating input.
WSK-PULL wireless addressable pull stations are dual action manual pull stations with a key-lock reset feature intended for use with a wireless gateway or wireless fire alarm control panels (FACPs).
The Water Proof Call Points by KAC are IP67 sealed for use in environments where protection against water ingress is required. The WCP5 Intelligent variant is designed for use with intelligent fire alarm panels running OEM communication protocols.
Waterproof Box for Emergency Pushbutton
Gent’s range of conventional manual call points are designed to provide a manual alarm interface to conventional fire alarm control panels.
Wireless Manual Call Point devices that allows a manual trigger of fire in a Vigilon fire detection and alarm system.
XP95 EExia Manual Detectors have high degree of tightness and protective cover and alarms can be given without risk of cuts. A maximum of 20 addresses can be connected per. protocol converter / insulator barrier.
Honeywell's XP95 and discovery bases with insulator have been designed to make it easier for the detectors to be replaced without problems with addressing.
Start your search with category name, product name, part number, etc.
Copyright © 2023 Honeywell International Inc.