XCD Sensors and Transmitters supplied separately

Single-gas and multi-gas mixtures for monitor calibration

FS20X Flame Detector

Accessories and Spare parts for the Sensepoint XCD family

Sensepoint XCD

General accessories for portable detectors.

General portables accessories

L-Series color lenses come in four colors options: amber, blue, green, and red. The lenses are compatible with L-Series strobes including wall- or ceiling-mount.

L-Series bezel kits enable installers to easily turn any L-Series fire or plain device into a device that meets ECN/MNS requirements.

SpectrAlert® Advance 4-wire horn strobes include a variety of features that increase application flexibility and simplify installation.

SpectrAlert® Advance strobes include a variety of features that increase application flexibility and simplify installation, such as field-selectable settings, including candela, and automatic selection of 12 or 24V operation.

L-Series with LED Outdoor Weatherproof horn strobes are rich with features guaranteed to cut installation costs and times with its lower current draw and modern aesthetics.

Sensepoint XCL

Accessories and Spare parts for the Sensepoint XCL family

Accessories and Spare parts for the Sensepoint XRL family

Sensepoint Toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output

Test, mounting and interface accessories and spares for the FS20X and FS24X Flame Detectors

Sensepoint XCD RTD

AGILE wireless base

Banderoles to mark the suction points

FSX™ fire and flame detectors sense the WideBand IR™ radiant energy of blackbody particulate and molecular emissions generated by both hydrocarbon and nonhydrocarbon flames and fires.

The Mounting Base is required to meet local code and application requirements and for that System Sensor offers standard 4in and 6in bases.

L-Series SPCW8 dual-voltage speakers provides a solution for ceiling mount applications that are used for tap settings that range between 1/8 to 8W. These speakers provide a solution for almost any voice or audio requirement.

DP-51050 dress panels are for use with Fire-Lite® MS-5UD/MS-10UD Series fire alarm control panels (FACPs). They restrict access to the system wiring but allow access to the membrane switch panel.

OSE-HP-01 OSID high power emitters are battery powered and interact with an OSID imager to provide early warning smoke detection.

The X-SMART System Management Software includes mediun to small project management software. It is a server-side system resource platform and a client-side management system.

L-Series low frequency sounders include a variety of features that increase their application versatility while simplifying installation.

WFDTN t-tap water flow detectors consist of a rugged, NEMA 4 rated enclosure that is more damage resistant than previous metal designs.

SpectrAlert® outdoor selectable output speaker strobes provide a broad frequency response range, low harmonic distortion, and maintain a high sound pressure level at all tap settings to provide accurate broadcast of evacuation messages.

In-Line Filter Elements provide to customers the ability to address a wide array of harsh environments with high levels of airborne contaminants in a simple and cost-effective manner.

VESDA-E VEA-40 Mounting Bracket is an accessory for VESDA-E VEA Local Relay StaX.

RF-FTX Additional filter accessories are used for HPX-751E HARSH ™ analog addressable aspiration detectors.

Anti-Condensation Film is used for OSID-EH housings. An easy applicable film that provide long time resistance to condensation on the glass fronts.

Xtralis Smoke detector is an interface card for the range of Xtralis VESDA VLF smoke detectors. Multi-function Control Card expands the range of input and output communications a VLF detector can perform.

VESDAnet sockets interface are required when a standard unit is used to provide a flexible solution where permanent mounting is not required in this case VESDAnet sockets connects the HLI onto the VESDAnet network.

CAC-4 Class A converters are for use with Gamewell-FCI® Flex 404 4-zone fire alarm control panels (FACPs).

The Gamewell-FCI Releasing Control Modules are specifically designed for fire suppression releasing applications in the E3 Series System.

The VSP-971 are the smoke sensor modules for the VESPA-E VEA-40. The VESDA-E VEA series of aspirated detectors combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options.

Ceiling Loudspeaker is a cost-competitive ceiling loudspeaker which has an excellent audio performance and aesthetic appealing enclosure. This full range loudspeaker features a high sound pressure level and a wide frequency response range.

Xtralis spare front cover is use with the VESDA-E VES & VESDA-E VEP Aspirating Smoke Detector. It consist of plastic with 3.5in Display size.

Spare Plastic Front cover for VES-A00-P smoke detector. It has LEDs in it for indication.

VP-CLIP 3/4-inch pipe support clamps are designed for use with VESDA® pipes. They are required for each five foot length of pipe.

The VSP-976 is a display front panel for VESDA-E VEA series of smoke detectors.

OSID environmental housings protect OSID imagers and emitters from dust and water ingress in industrial environments. The glazed housings are made of ABS and the glass windows cause minimal attenuation of the UV and IR beams.

OSID environmental housings protect OSID imagers and emitters from dust and water ingress in industrial environments. The glazed housings are made of ABS and the glass windows cause minimal attenuation of the UV and IR beams.

Fire-Watch 411 Series digital alarm communicator transmitter (DACT) handheld programmers are digital devices used to locally program NOTIFIER® 411 Series DACTs.

The 7720P programmer or the Web-Based Program is used to enter all central-station information. This is saved to the IPGSM-COM communicator panel memory.

The Tamper Proof Sampling Points (TPSP) provide an elegant addition to modern decor and can both minimize the risk of vandalism and tolerate abuse.

VESDA-E Sampling Module

VESDA Pipe and Fittings are part of an integrated system manufacturedfrom specialty plastics designed for use with most aspirating smoke detectionsystems, the VESDA VLP system in particular

4XZM zone relay modules provide four Form C relay contacts to fire alarm control panels (FACPs).

End-of-line (EOL) resistors are sold in packs of 10 and are available in 4.7 or 47K Ohm.

L-Series low frequency compact wall sounders include a variety of features that increase their application versatility while simplifying installation.

L-Series speaker strobes reduce costly ground faults using a plug-in design and universal mounting plate that allow the installer to pre-wire mounting plates, dress wires, and confirm wiring continuity before plugging in the speakers.

InnovairFlex™ duct smoke detectors combine an impressive collection of innovations designed to save you time and money and provide the flexibility you need in the field.

InnovairFlex™ 4-wire photoelectric duct smoke detectors offer 2 sensors to 1 powerboard capability in standard (D4120) and watertight (D4120W) versions.

L-Series with LED Outdoor Weatherproof horn strobes are rich with features guaranteed to cut installation costs and times with its lower current draw and modern aesthetics.

L-Series with LED Speaker Strobes are rich with features guaranteed to cut installation costs and times with its lower current draw and modern aesthetics.

Honeywell's SpectrAlert® Advance SP series speakers are dual voltage speakers designed for fire protective signaling systems.

System Sensor L-Series speakers reduce costly ground faults using a plug-in design and universal mounting plate that allow the installer to pre-wire mounting plates, dress the wires, and confirm wiring continuity before plugging in the speakers.

L-Series selectable-output speaker strobes and dual-voltage evacuation speakers enable faster, trouble-free installation.

L-Series Outdoor Weatherproof Horns are rich with features guaranteed to cut installation costs and times with its lower current draw and modern aesthetics.

L-Series compact horns are designed to simplify installations to provide primary and secondary signaling for fire and security applications.

SpectrAlert Advance Outdoor Back Boxes ensure a NEMA 4X weatherproof listing for AV devices.

Alarms, audible and visual alarms, water flow indicators and others

System Sensor L-Series speakers reduce costly ground faults using a plug-in design and universal mounting plate that allow the installer to pre-wire mounting plates, dress the wires, and confirm wiring continuity before plugging in the speakers.

L-Series low frequency sounders include a variety of features that increase their application versatility while simplifying installation.

System Sensor L-Series low frequency sounder strobes are rich with features guaranteed to maximize profits with lower current draw and modern aesthetics.

VESDA-E Smoke Detection Chamber

System Sensor L-Series low frequency sounder strobes are rich with features guaranteed to maximize profits with lower current draw and modern aesthetics.

VESDA® VPS100/300 and power supplies are capable of providing operating power, including battery backup, for the entire line of VESDA by Xtralis® aspirating smoke detectors.

VESDA VLF remote display modules provide real-time indication of the status of a VESDA detector.

Installation/removal tools are designed for use with System Sensor® plug-in smoke detectors. They permit installation and removal of detectors in elevated mounting locations.

OSE-RBA spare alkaline battery packs are intended for use with the open-area smoke imaging detection (OSID) devices.

Open-area smoke imaging detection emitters (OSIDs) are a new innovation in projected beam smoke detection technology using advanced dual wavelength projected beams and optical imaging technology for early warning smoke detection.

CO1224T carbon monoxide (CO) detectors with Real Test® use a highly accurate and reliable electrochemical sensing cell to provide an early warning of dangerous CO levels.

InnovairFlex™ 2-wire photoelectric duct smoke detectors sense airflow at speeds ranging from 100 to 4,000 ft/min.

OSID beam detector FTDI cables allow connection of a PC with OSID diagnostic software to the imager.

Multi-voltage conventional relays are used for high-current switching applications such as fan and damper assembly control, door control, air handling unit controls, and other types of system interfacing.

Heating kits for use to prevent condensation with the BEAM1224 conventional beam smoke detectors. They lessen the likelihood of condensation by maintaining the unit at a temperature that is slightly higher than the surrounding air.

Replacement Sensor for VESDA Sensepoint XCL Detectors.

VEA provides assured detection through active sampling and end to end system integrity monitoring.

VESDA-E VEA microbore tubes are custom made, high quality plenum rated flame retardant polyethylene tubes. They have superior stress crack resistance for reliable long-term performance

VESDA-E VEA RA joiners are right angle joiners for VESDA-E VEA microbore tubes. They come in packs of 10.

Pipe – 3⁄4”

VESDA® pipes and fittings make up a network of dependable specialty piping that constantly and efficiently carries air samples from protected zones to highly sensitive detectors.

ST metal sampling tubes may be installed from the front or back of System Sensor® HVAC duct smoke detection and monitoring products. The tubes lock securely into place and can be removed by releasing the front or rear locking tab.

6500-SMK surface-mount kits are intended for use with beam detectors to mount transmitters and receivers when using 6500-MMK multi-mounting kits.

6500-MMK multi-mounting kits allow 6500 beam smoke detectors to be mounted to ceilings or to walls where the detector and reflector cannot be mounted within 10° of one another.

4X™F transmitter modules provide output for local energy municipal box transmitters, and alarm and trouble reverse polarity circuits. The modules include a disable switch and disable trouble LED.

VESDA VIC Multi-function Control Cards are interface cards for the range of Xtralis VESDA VIC smoke detectors. They expands the range of input and output communications.

VSP-030 filters are for use with VESDA® VLI intelligent detectors.

VLI Secondary Foam Filter is an Internal secondary filter spare part for VESDA VLI.

Backboxes are for use with fire alarm control panels (FACPs) and are used to mount up to two batteries and power supplies.

Xtralis ICAM Accessories offers Medium and fine filter elements for the internal filters inside the ICAM IFT, ICAM IAS and ICAM ILS series detectors. Replacement filters elements are available in pack of 10 with Black colour

VESDA-E VEA Microbore Tube Cutter are used for cutting microbore tubes.

VSP 850 in-line filters provide Xtralis® customers the ability to address a wide array of harsh environments with high levels of airborne contaminants in a simple and cost-effective manner.

The ANU-48 is a remote annunciator used with the E3 Series® Fire, Mass Notification, Voice Evacuation and S3 Series Systems.

Notification Appliance Circuit (NAC) expanders/power supplies are designed to extend the power capabilities of existing NACs (to support ADA requirements and NAC synchronization) and provide power for auxiliary devices.

Remote power supplies/battery chargers FCPS-24 are compact, cost-effective, 6- or 8-amp remote power supplies with battery chargers.

Anti Condensation Film is an easy applicable film that provide long time resistance to condensation on the acrylic Emitter lens

OSP-003 acrylic test filters are intended for use with OSID detectors.

Installation kits for OSID detectors include a laser alignment tool, a test filter, a PC cable, a cleaning cloth, and a manual.

VSP-960 is used as a mounting bracket for VESDA-E.

Bluetooth-Enabled Industrial Gas Transmitter

L-Series with LED Speaker Strobes are rich with features guaranteed to cut installation costs and times with its lower current draw and modern aesthetics.

L-Series with LED Outdoor Weatherproof strobes are rich with features guaranteed to cut installation costs and times with its lower current draw and modern aesthetics.

5600 Series mechanical heat detectors offer property protection against fire and are intended for non-life-safety installations where smoke detectors are inappropriate.

L-Series horns are designed to simplify installations to provide primary and secondary signaling for fire and security applications.

The DST family of sampling tubes are pieces of steel piping with a series of holes drilled the entire length of the tube and should extend the entire width of the duct.

i³™ Series offers conventional, photoelectric and photo/thermal smoke detectors in both 2-wire and 4-wire formats.

Multi-Spectrum™ SS4 electro-optical fire detectors are fast reacting, digital, configurable, computerized “smart” units.

L-Series 4-Wire horn strobes are intended for full building notification as well as on the property ground.

Honeywell's SpectrAlert® Advance SP series speakers are dual voltage speakers designed for fire protective signaling systems.

CO detector replacement plate to cover the footprint of previously installed detectors.

L-Series Surface Mount Back Boxes are the best solution in locations where you have a hard surface to mount to.

L-Series LED 2-wire horn strobes are rich with features that increase application versatility, simplify installation, and maximize profits with lower current draw and modern aesthetics.

L-Series LED 2-wire horn strobes are rich with features that increase application versatility, simplify installation, and maximize profits with lower current draw and modern aesthetics.

DCOIL remote test coils are required for older DNR(W) duct detector housings.

L-Series 4-Wire horn strobes are intended for full building notification as well as on the property ground.

SS Series UV/IR test lamps are designed for use with SS4-AS, SS4-AS2, and SS4-AUV2 fire and flame detection devices. They come with a PW-3123-0005 universal charger.

SpectrAlert® outdoor selectable output speaker strobes provide a broad frequency response range, low harmonic distortion, and maintain a high sound pressure level at all tap settings to provide accurate broadcast of evacuation messages.

2D51 duct smoke detectors are low-profile photoelectric detectors designed for special applications, specifically for use in no-flow or low-flow air-handling systems (0 to 4,000 FPM).

SpectrAlert® Advance Series horns are designed to simplify installations to provide primary and secondary signaling for fire and security applications.

L-Series selectable output chimes are private mode notification appliances used to alert trained personnel to investigate possible emergency situations.

The VESDA-E VEA Microbore tubes are custom made, high quality plenum rated flame retardant polyethylene tubes that are reliable long-term performance. They are lightweight and flexible for easy handling and installation.

The VESDA-E VEA series of detectors are used for early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.

Multi-voltage conventional relays are used for high-current switching applications such as fans and damper assembly controls, door controls, air handling unit controls, and other types of system interfacing.

L-Series with LED Outdoor Weatherproof strobes are rich with features guaranteed to cut installation costs and times with its lower current draw and modern aesthetics.

SpectrAlert® Advance Series mini-horns are designed to simplify installations to provide primary and secondary signaling for fire and security applications.

The InnovairFlex™ Series are the only duct smoke detectors flexible enough to fit configurations from square to rectangular and everything in between.

Standard sampling points are designed for a ceiling with a void where micro bore tubes are run in the void and sampling points are mounted in the ceiling.

VESDA-E VEA sampling point and microbore tube is fully supervised by the detector. VEA sampling points are available in two different type standard and surface mount. It can be used in Healthcare, Offices and Electrical cabinets.

The SENS-RDR utilizes infrared technology to read the sensitivity of i3 and 100 Series conventional detectors.

L-Series speaker strobes reduce costly ground faults using a plug-in design and universal mounting plate that allow the installer to pre-wire mounting plates, dress wires, and confirm wiring continuity before plugging in the speakers.

Addressable output supervised control modules allow a Gamewell-FCI® analog addressable fire alarm control panel (FACP) to switch an external power supply, such as a DC supply or audio amplifier (up to 80 Vrms), to notification appliances.

VSP-877 flush-mount sampling points provide a functionally and aesthetically improved alternative to the conical sampling points used in Xtralis® aspirating smoke detection (ASD) pipe networks.

Spare Exhaust Adaptor for the VEU series of aspirating smoke detectors.

VSP-878 adapter kits are designed to allow the VSP-877 flush-mount sampling points to be used with larger 1/2-inch capillary tubing.

SSM Series alarm bells are low-current, high-decibel notification appliances for use in fire and burglary systems or other signaling applications.

WTP weatherproof plates enable installers to flush-mount outdoor horns, strobes, horn strobes, speakers, and speaker strobes to a variety of wall surfaces, including brick, ceramic tile, concrete, and masonry brick.

Vesda Test Transformers are previously known as the Hot Wire Test Power Supply Unit. They are used to test very early warning aspirated smoke detection equipment.

FS24X Flame Detector

RBB surface-mount accessory cabinets can be used if the main control panel backup batteries are too large to fit into the main control panel cabinet.

TR-1 trim ring assemblies are for use with Gamewell-FCI® Flex 4-zone fire alarm control panels (FACPs). They allow semi-flush mounting of the cabinet. Red and black options are available.

Single Terminal Back Boxes are used for mounting RTS151 key. Remote annunciator accessories providing reset function and has a Red LED to indicate alarm conditions.

Intelligent loop module mounting plates are for use with Gamewell-FCI® E3 Series® cabinets (B and C sizes are available).

ANN-MBRLY mounting brackets are for use with NOTIFIER® NFW2-100 fire alarm control panel (FACP) applications.

The VESDA-E VEA Power Supplies are designed to power the VESDA-E VEA Detector and VESDA-E VEA Relay StaX including battery backup. It provides 24 volt operating power to the VEA unit as well as battery charging function.

VSP-972 filters are spare filters for use with VEA aspirating smoke detectors.

XCL-XRL-SC-H2 is a VESDA Sensepoint XCL/XRL replacement gas sensor for hydrogen gas.

The E3 Series® Cabinets offer a variety of cabinet options to house either the E3 Series or S3 Series fire alarm control panel systems.

The E3 Series® Cabinets offer a variety of cabinet options to house either the E3 Series or S3 Series fire alarm control panel systems.

E3ID2 inner door assemblies are for use with Gamewell-FCI® E3 Series® cabinets (AA, B, C, and D sizes are available).

Surface backboxes are for use with Fire-Lite® BG-12LR agent release stations.

Serial and parallel gateway modules allow you to connect virtually any standard PC-compatible printer to a Silent Knight® Series fire alarm control panel (FACP) and to generate reports on site.

5820XL LED I/O driver modules provide an effective means to customize your remote annunciation. They provide LED annunciation and control inputs for the fire alarm control panel (FACP).

CB500 wiring barriers are used to separate power-limited and nonpower-limited wiring inside of junction boxes.

PAM multi-voltage relay modules are ideal for applications where remote relays are required for control or status feedback.

Reversing relay and synchronization modules enhance the operation of 2- and 4-wire i³™ Series detectors equipped with a sounder.

Velociti® Series addressable audio evacuation modules control the communications between the command center and the telephone jacks/warden stations.

The trim rings are designed for semi-flush mounting applications, and intended for use with BG-12 Series fire alarm pull stations.

The STI is an accessories that are been used with STI Stopper II®. The accessories that are been used are conduit gasket and conduit spacer.

Flush Sample Point Head only for 10 mm OD tube.

The E3 Series® Cabinets offer a variety of cabinet options to house either the E3 Series or S3 Series fire alarm control panel systems.

The printer is used with the Gamewell-FCI fire alarm control panels (FACPs) and provides printer capability to produce a written record of system events and status changes.

VESDA® LCD Programmers are menu-driven, allowing the user to conveniently configure, commission, and maintain a VESDA aspirating smoke detection system, as well as program each individual detector.

VPS-300US Power Supply provides power for: up to 3 VESDA VLP or Laser SCANNER detectors, or up to 15 remote (single box) units, or up to 3 sub rack assemblies.

Fire detector protective cover helps prevent malicious or accidental false fire alarms. This unique device has helped prevent false fire alarms around the world for decades.

Intevio extension keypads are for use with remote call stations. Models available with four function buttons/LED indicators, and eight function buttons/LED indicators.

E3 Focal Point Kit including SLP-BLK, RPT-E3- UTP, SLC-PM and FPT-GATE-3. Used to connect a network of E3/S3 panels to the Focal Point Workstation.

FM Series electromagnetic door holder by Fire-Lite are designed for virtually any remote door release application. They are primarily used to hold fire and smoke barrier doors open until released by a remote smoke detector or other switching device.

KILLARK® XAL-53 explosion-proof pull stations are suitable for use in hazardous areas due to the presence of flammable gases or vapors, combustible dust, or easily ignitable fibers.

The MegaDot Display offers message clarity from a 200 ft. (61 m) distance allowing you to visually connect with your employees or customers. the MegaDot uses 10.2cm tall characters for dazzling, moving colour messages you know everyone will notice

The E3 Series® Cabinets offer a variety of cabinet options to house either the E3 Series or S3 Series fire alarm control panel systems.

Honeywell's FireLite Alarms Firefighter Phone Jacks are used to mount to a single-gang electrical box. All circuits are power-limited and supervised.

Expand the versatility of the InnovairFlex™ line of duct smoke detectors with System Sensor notification and test accessories.

VESDA-E Series aspirator

FM Series electromagnetic door holders are designed for virtually any remote door release application. They are primarily used to hold fire and smoke barrier doors open until released by a remote smoke detector or other switching device.

FM Series electromagnetic door holders are designed for virtually any remote door release application. They are primarily used to hold fire and smoke barrier doors open until released by a remote smoke detector or other switching device.

Designed for simple installation and operation, 301C controllers continuously monitor and control toxic gases, combustible gases. and oxygen hazards.

AirSCan IRF9 Sensor by Honeywell Analytics is a range of Infrared diffusion-based gas detection that enables thermal stability and freedom from vibration. The IRF9 satisfies AB32 California code and is CARB compliant.

The Relay Module provides 8 DPDT relays for the indirect activation of fans, louvers, etc. at programmable alarm levels.

VESDA® VLI early warning aspirating smoke detection systems are designed to protect industrial applications and harsh environments up to 21,520 ft2.

Multi-criteria intelligent detectors combines photoelectric, thermal and infrared (PTIR) sensors in one unit to sense multiple components of a fire.

MCS multi-criteria fire and carbon monoxide (CO) detectors are plug-in addressable devices that combine four separate sensing elements to sense multiple components of a fire: smoke, CO, light/flame, and heat.

SB-I/O surface-mount backboxes are for use with Silent Knight® PS-SA and PS-DA pull stations.

302 Series rate-anticipation heat detectors operate within a controlled range of two to three degrees of their setpoints, regardless of the rate of temperature rise. These detectors are available in either 135 °F (57.2 °C) or 194 °F (90 °C) ratings.

Battery charger circuit board and mounting chassis are designed for use with fire alarm control panels (FACPs).

The VLI detector combines a fail-safe Intelligent Filter (patent pending) with an advanced clean-air barrier for optics protection allowing the use of absolute detection and a long detection chamber life without the need for recalibration.

SP-2B MNS Announcement Evacuate sign is slim 2-1/2 deep box is made of steel, is painted white and is designed for surface mounting. The messages are printed in clear within a black box on clear film.

The LED Array Series Indoor Displays are LED message centers designed for light industrial, commercial, and office use. They quickly display large amounts of information in eight colors and three rainbow effects.

BAT Series batteries are Power-Sonic brand batteries. BAT series (or Power-Sonic brand) batteries are recommended for secondary power or backup power for all NOTIFIER® fire alarm control equipment.

VESDA® Modbus type 3 HLIs act as a proxy for all VESDA devices on the VESDAnet™ network, providing access to rich status information available from VESDA detectors, as well as the ability to control and configure these devices.

Command center mounting plates are for use with Gamewell-FCI® E3 Series® cabinets (C and D sizes are available).

Inner door panels are for use with Gamewell-FCI® E3 Series® cabinets. These panels are blank and double size.

i³™ Series offers conventional smoke detectors with sounder, relay and isolator features included.

L-Series LED strobes are rich with features that increase application versatility, simplify installation, and maximize profits with lower current draw and modern aesthetics.

L-Series with LED chime strobes are private mode notification appliances used to alert trained personnel to investigate possible emergency situations and to take appropriate action.

L-Series LED strobes are rich with features that increase application versatility, simplify installation, and maximize profits with lower current draw and modern aesthetics.

L-Series with LED chime strobes are private mode notification appliances used to alert trained personnel to investigate possible emergency situations and to take appropriate action.

FM-Series electromagnetic door holder spacers are used, when necessary, for the installation of remote door release systems.

XRM optional transformers are designed for use with Fire-Lite® fire alarm control panels.

HPTCOVER transformer enclosures are used in applications where the installation requires a plug-in transformer to be securely affixed to an AC wall outlet.

MNS Indoor Display's are LED message centers designed for light industrial, commercial and office use

Seismic Mounting and Bracket Kit

L-PCP ceiling loudspeakers are powerful ceiling mounted speakers. They are specially designed for environments, such as shops, supermarkets, educational institutes, offices, sports fields, hotels, restaurants, and wet environments.

The Fire Fighter’s Handsets are designed for use with a variety of life safety control systems. They provides two-way emergency telephone communication between fire fighters and other authorized personnel for a life safety system.

The BB-STD is a accessory of a System Sensor.

Sync-Circuit Modules synchronize SpectrAlert Advance strobes, horns, and chimes over a single pair of wires.

L-Series trim rings provide additional space within the backbox. The design is universal across the L-series notification appliance line and supports indoor horns, horn strobes, chimes, chime strobes, strobes, speakers, and speaker strobes.

System Sensor Select Series detector color kits offer expanded color options to meet varying aesthetic applications.

L-Series universal expander plates cut costs and speed installation on emergency communications applications that require fire and emergency warnings by combining the functions of multiple devices on a single mounting plate and backbox.

Detector test magnets simplify detector testing and maintenance

AP-P adapter plates are decorative plastic adapters for mounting 302 Series detectors to four-inch outlet boxes.

The Flex 410 is a ten zone fire alarm control panel (FACP) expandable to twenty or thirty zones using optional CZM-400 zone expander module(s).

ASD SITE LIC PRIMARY KIT VSM4

The VSM4 software product are valuable revenue generator for Xtralis distributors.

EQBB backbox assemblies are for use with EQ Series cabinets. These assemblies are available in red or black and feature two, three, or four tiers.