Asia Pacific
Europe
Middle East
North America
You are browsing product catalog for
Fire control panel FlexEs Control FX18 is the basic version with 2 slots and expandable to 10 slots.
The Honeywell wall mounting brackets are used for mounting single channel gas detector controller.
10W 6.5 round wall or ceiling surface mount loudspeaker
Proximity Readers are available without keyboard and with memory for degraded operation. They have Integrated MGP-I means 1 low power relay of 2A and 1 double balanced input.
12V Rechargeable Battery
Proximity Readers have 12-key backlit keyboard and memory tamper for degraded operation. They can be used for time attendance or anti-intrusion stamping without line module.
CPU Cards are required for system / sub-centers or parallel panel control.
Peripheral Modules are only be used on system terminal 1 of the control panel interface board.
19 mounting set with cutout for fuse holder and circuit breaker
19 power strip 8x with switch
Esser’s upright cabinets with hinged frame are stable and practical 19" swivel frame cabinet for easy installation and easy access during servicing. It is completely detachable. Its pivoting frame and door are changeable, with little effort in hinge.
CAT5 Patch 1 m Cable available in gray color which can be used for DAL and Ethernet.
2 x 6 W, 2 x 4 AB cabinet loudspeaker EN 54, MDF
Esser’s VARIODYN® D1 power amplifiers possess two independent amplifier channels, compatible with the VARIODYN® D1 System. It has protection against thermal overload and short-circuits during output. It has temperature controlled ventilation.
IQ8Wireless gateway is especially designed for convenient and time-saving expansion of an already existing IQ8Control/FlexES Control fire detection system.
Optical Smoke Detectors are designed for conventional fire alarm control panels. All detectors are provided with switch-on control.
The 6.5" ceiling loudspeaker with its 2-way system features an excellent sound quality. It offers a broad frequency range and a high sound pressure level, thereby guaranteeing excellent music and speech reproduction.
Esser’s VARIODYN® D1 power amplifiers possess two independent amplifier channels. A European lIEC connector, mains fuse are located on the back of the amplifier. It can only be operated via a three-wire system feed with a protective ground wire.
The A/B-line recessed ceiling loudspeaker for voice alarm is certified according to EN 54-24 and offers maximum safety for voice alarm projects.
Base is the integral part of LED remote indicator.
The detector base is an accessory designed for LED remote indicator.
The Contact Interface Module is used as an interface of VARIODYN D1 system for the connection of 8 control contacts.
Extension Modules are for 4 modules & These connection is made by a prefabricated connection cable.
The 4 Module Slots Connection Terminal shouldered 2 m connection terminal for wiring connection of esserbus/esserbus-PLus (up to 4 modules) to expansion module carrier.
500W High Efficiency Power Amplifier
Optical Smoke Detectors are used for reliable early recognition of fires & Its Responds well to slow-burning, smouldering fires.
520-CAP is T-branch accessory for capillary pipes.
520-FIN Sampling Points are used for Capillary Tube.
530-FLEX Flexible tube with elastomer and interior metal spring is an accessory used for Suction System.
530-TAP Sample Tubing End Caps is 5 Pack accessory.
VARIODYN® D1 Power amplifier 2 x 250 W,
Wall Surface Mount Speaker Speak 6 with integrated 100 V transformer. The loudspeaker is designed to be easily mounted on any flat surface
Call station 586306 is designed to maintain duplex communication between the operator of the VoCALL system and the subscriber on the side of the outdoor panel.
586307 Call Stations Type B are designed to maintain full duplex communication and are equipped loud built-in buzzer and LED status indication. They can be installed on both surface and cut-in(using additional edging)installation.
Call station 586309 is designed to maintain duplex communication between the operator of the VoCALL system and the subscriber on the side of the outdoor panel.
586326 Call Stations Type A are designed to maintain duplex communication with the operator of the VoCALL system and the subscriber from the call station.
5881ENHC commercial wireless receivers are designed for use with control panels that are approved for commercial fire and/or burglary installations.
6W Wooden Cabinet Loudspeakers are wall surface mount speaker WA 06-165/T with high-quality 165 mm broadband loudspeaker chassis with softline design
7428-CONNECTOR
Anchor plates in combination with holding magnets are the integral part of an automatic door arrester system.
Anchor Plate is attached to mounting plate with adjustment for external angle modification for the holding magnet types 838 and ex-door holding magnet.
Smoke Detector Tester allows fast and reliable functionality testing for Series IQ8Quad and 9x00 smoke detectors. Through reduced mechanically controlled actuation pressure, suspended installed detectors can also be tested
A/B 6W Wall Mount Speakers are general purpose white wall mount speaker
ABS Rohre mit einer Lieferlänge von 3m und einem Außendurchmesser von 25mm
Adapter board for installation into the FAS provides the redundant port for the FAT 4000, ZPA4000, GMT4000 or FBF4000uC starting from the serial interface of the FACP FlexES Control.
ADP-N3S-EDP Adapter modules are microprocessor-based devices used for installation in FlexES fire alarm panels.
ASPIRE CD ROM comes with programming software VConfig Pro and planning software ASPIRE, system presentations, reference projects, tender texts and documentation. For use under Windows® 9X, 2000.
Adapter Module ADP-FBF is a snap-on adapter board for the expansion of the redundancy adapter ADP-N3E, ADP-N3S or ADP4000.
Adapter Module ADP-N3E is a microprocessor-controlled module for installation (mounting rail) in System 8000 or IQ8Control fire alarm panels.
Adapter cable for Scorpion control unit 805540 for operation with quick charger 805543
Adapter for telescopic rod 060426
ECS 800 is an addressable Control and Signaling Equipment that can manage 127 detection points on 1 looped back bus. The ECS 800 is a "plug and play" switchboard with automatic recognition and addressing of detection points on the looped bus.
Adhesive Labels are used for DCS and DCSF series paging stations with "Honeywell" inscription.
Air filter
Esser's Alarm Sounders are either flush mounted or mounted below Detector Base with relay output for automatic detector series.
Alarm transponder for VARIODYN D1 provides each 2 supervised relay outputs for optical alarm signaling devices to provide alarms to people.
Amber Optical Alarm Signaling Device is made using ABS and is equipped with a base.
Amplifiers Output Cables DOM
Annunciator Expander Ribbons of 20-wire are connects the ACM J1 with AEM J2.
Aspiration reducing film sheets are required for smoke-extraction openings. The foils are for tapering the drill holes in the intake manifolds and prevent any increased development of noise in the operation of the aspirating smoke detection system.
Nylon capillary tube rolls of 100 meters with 10mm outer diameter and 8mm inner diameter are used for aspiration systems.
Aspirator to built in 19" rack
Audible Alarm Device Sounder offers a selection of 32 acoustic signals including the DIN German standard as well as additional country-specific acoustic signals. The configuration is carried out via a five-pin DIL-switch.
The Audible alarm signalling device offers a selection of 32 acoustic signals including the DIN German Standard as well as additional country-specific acoustic signals.
Audio Control Modules are the audio control interface to connect the third system and the broadcast device. The third system can operate broadcasts through the audio signal and the control signal, such as the switch or voltage signal.
Emergency Power Supply Unit for supplying power without interruption with double conversion.
Automatic Detectors with fast semiconductor sensor for the detection of fires with extreme fluctuations, rapidly rising and with fixed temperature heat function for the detection of fires, light smoke generation with slowly rising temperatures.
Back Light Mirror with nine prisms
Backup cable RC 22 VARIODYN D1
Backup cable RC 44 VARIODYN D1, 1,2 m
Base with Side Cable Entry is an accessory for optical alarm signaling devices.
The Titanus Pro Sens EB can be directly connected to the esserbus / powered loop. The device is supplied with front foil for single-tube operation.
Battery Expansion Housing in Pro-Box.
Battery operated alarm equipment have been designed to equip establishments requiring type 4 alarm equipment.
Beam Detector Reflector
The Beam Sensor accessories are designed exclusively for S4 Beam sensor.
Blind Plates in black INTEVIO design are used to cover free installation space in the floor-standing cabinet. They are available with one, two, three and four height units.
Bose FreeSpace DS 100SE VA are extended-range, high-performance loudspeaker with two 2.25" (57mm) Twiddler® drivers and a single 5.25" (133mm) woofer in a ported enclosure designed for surface mounting in background music and paging applications.
The Bose® FreeSpace DS 16F VA is the entry-level member of the DS loudspeaker family. It is a high-performance, full-range, flushmount loudspeaker designed for background music and speech reproduction in a wide range of installed applications.
Bose FreeSpace DS Loudspeaker are high output loudspeakers. Shared voicing across entire FreeSpace DS product family enables DS 16, DS 40 and DS 100 loudspeakers to be integrated on the same system and maintain consistent tonal quality.
Breakable Cover Seal
CAT5 Patch Cables are available in 1,2 and 3m in various colors such as blue and yellow and can be used for DAL and Ethernet.
COMPACT 9 Master Stations are ideal for small to medium sized installations supporting up to 9 call stations of all types, expandable up to 19. They can be used in feedback systems, emergency communication systems for MGN, or in combined systems.
The CPU panel control unit cards used for installation in 8008 or 8010 series fire alarm panel.
Esser’s cabinet system frames are space savings and have manifold configuration possibilities in combination with accessibility from the front and the back. Due to the permanently fixed 19” guide rails a significantly higher weight load is possible.
Loudspeakers are elegant in design with excellent voice and music reproduction making them suitable for applications in various environments, such as shopping centers, education institutions, office buildings, hotels, and restaurants.
Esser’s cabinet system frames save space and money. The swiveling 19” doorframe makes the cabinet accessible from the front side and is easy to mount on the wall. Cabinet is easy to open even while the 19” doorframe is fully charged.
Cable Connection Terminal is 2m cable for the essernet modules with 62.5 kBd or 500 kBd transfer rate.
Cable set for internal housing connections of the batteries to the amplifiers
Cables for Cabinet Rear Panel are used for prefabricated cabling of the 100 V outputs of DOM4-8 and DOM4-24, 1 and 4 piece can be connected respectively.
Type B call stations have a hands-free function with full duplex support, loud built-in buzzer, LED status indication and braille buttons. They can be installed both surface and cut-in (using additional edging) by mounting.
Type A call stations are equipped with a handset housed in a compact housing with a door on a magnetic latch, have a loud built-in buzzer and LED status indication.
KMSIMP is a Card 2 Remote Control Outputs with current emission.
Ceiling Loudspeaker is a cost-competitive ceiling loudspeaker which has an excellent audio performance and aesthetic appealing enclosure. This full range loudspeaker features a high sound pressure level and a wide frequency response range.
The Central remote indicator in aesthetic flush-mounted aluminum housing as additional display for the fire alarm system.
Central remote indicator in aesthetic surface-mounted plastic housing acts as an additional display for the fire alarm system. The connection to FlexES Control is made via a serial interface of the FACP.
A 3-pin ceramic terminal and a thermal fuse (trigger temperature 240 °C) offers the necessary protection to prevent a short circuit of the loudspeaker in case of fire and prevent further damage.
Consumable used in Chemcassette® paper tapes based single and multipoint gas detection systems
Column Loudspeakers are specifically suited for the acoustic irradiation of particularly reverberant spaces that are acoustically difficult to fill with sound, such as auditoriums, conference rooms, etc.
Column Loudspeaker stands out with its good voice reproduction and its excellent sound pressure.
Combi Speech Alarm Unit is designed for IQ8Alarm.
Combined Alarm Devices are for indoor and outdoor installation & Alarm sounder and flashing light may be activated separately.
Comfort Repeater Panels for ECS 80. Provide feedback from the heating system fire detection (SDI) and / or the alarm management unit when integrated into the SDI.
Communications kits for connection of external devices through the essernet network. Composed of box, RS232 serial communication interface, 232 / v24 converter module board, EDP communication serial interface board module.
Loudspeakers are compact and elegant in design & are available in various shapes and applications with different power outputs such as 10 W, 15 W, 20 W and 30 W. They are used for quick installation with high sound pressure & high weather resistance.
Adapter Modules are used for connecting a paging system to a Series 8000 / IQ8Control fire alarm system with ADP-N3E & To connect the paging system via an electrically isolated RS232 interface, an ADP-PRS-422 is used.
The Connection Terminal is used for external power supply of the periphery over screw-type terminals.
Connection board 4 IN - 2 OUT
Contact Interface Module CIM
Contactor 3x25 A
Control Panel Interface RS 232 cable is used for interface for programming all Series 8000 fire alarm control panels, extinguishing panel 8010 and 5008 intrusion detection control panels with a notebook and programming software.
The Conventional Fire Detectors by Esser are coventional 9000 series fire detector and are automatic detector with high reliability for mid-sized and smaller objects .
Conventional MCP are with plastic triggering element, which supports easy reset after an alarm has been triggered without having to replace the broken element (glass pane).
The ECO1005 thermal detector belongs to System Sensor’s ECO1000 range of detectors. ECO1000 is a range of conventional detectors produce latest manufacturing technology and supplied with an array of advanced features, making them ‘better by design’.
Converter RS232/RS485 is used for converting a serial interface from RS 232 to RS 485 and vice versa. It is suitable for installation rail mounting.
Cover Plates are for covering the connection when operated without detector.
DC-DC converters provide a stable output voltage, e.g. to supply special detectors with stable energy in accordance with the standards.
DCSF Enclosure is a wall enclosure manufactured out of sheet steel for the inclusion a firefighter paging microphone DCSF12 or DCSF 1
DIGIINT are interface used for connecting DIGI microphone to IDA.
The DMK18 Digital Key Modules have been designed to be used for extending VARIODYN D1 Digital Call Stations upto 300m via Cat5 cables.
DSC2 Digital Call Stations are the system can generate and also receive different voice transmissions and control signals independently
The DX Connexion is an enhancement of the Morley-IAS Dimension panel range. The DX Connexion Panel series also include the modular unit PCB and Base Card.
Decal IQ8 Stickers by Esser are Swedish sign and signs such as evacuation alarm, fire alarm, siren symbol, hidden detector stickers in Swedish language.
Deep Waterproof Base is designed for wall-mounted beacons.
Design Pendulum SB is available in white colour with 500mm size.
Desk Station with DGM1 Pre-Chime System in an elegant housing with 1 labelable key with LED display for key control and busy / operating / gong display and Cardioid gooseneck microphone in electret condenser technology.
Desktop call station with chime-system DIGI M1. 1 writable button and DIGI M4. 4 writable buttons with LED indicator for keyboard control and busy /operating-/chime display.
Esser’s upright cabinets include assembly of voice alarm components and smaller accessories. Its rear door is of steel plate. It has removable side walls which are lockable. Its three-part base plates are passively ventilated.
The ES Detect automatic detector is an intelligent nonaddressable detector specifically designed for operation on conventional detector groups
The Detector Kit is designed for open installation.
Detector Tester Kit Testifier 2001 for the functional testing of point-type fire detectors with various sensors.
Digital Call Stations DCS15 are used for dialing of loudspeaker circles for sending voice announcements and of various gongs or alarms
Digital Call Station DCS2 redundant
Digital Fire Brigade Intercom DCSF1 are used for sending voice announcements via handheld microphone with a built-in loudspeaker
Digital Fire Brigade Intercom DCSF12 are selecting speaker zones to sending voice announcements as well as various Gongs or alarms
Digital Key Module DKM18 for redundant call stations
The Digital Multi-audio Player device features an integrated DVD/CD player, an MP3 player and an FM/AM tuner, as well as an USB/SD interface.
The communication module ID-CRA is connected to the analogue Notifier ID3000, ID2000 and ID50 to maintain security of the fire control and detection system by sending any event to a central station which is monitored permanently
Digital firefighter microphone DCSF1 redundant
FlexES display and operating panel brings new features so-called night-mode design featuring a completely smooth, easy-to-clean surface experience. The 5.7" graphic display can indicate more than just a customer-specific logo in normal mode.
Door Release Button
Door Station Type A comes with a door can be surface mounting and made of stainless steel material.
Doormaster-Smart-PAL-Telephone interface
Dummy plate is used to install fire stations DCSF12 or DCSF1 in the upright cabinets
Dummy plate 1 HU
Dutch and german version manual call points are available with large design aluminum housing.
Hand-held microphones in a stable metal version, with one key for paging microphone station DIGIM1WH
EBM 200 Pylon Support is made of steel and includes mounting flanges. It guarantees lasting fixation compression chamber speakers and sound projectors, even in a "difficult" environment.
ECO1003 optical smoke sensors use state-of-the-art optical chambers combined with application-specific integrated circuits (ASIC) to provide quick and accurate detection of fires.
The conventional ECS 80 Fire Control and Signalling Equipment are designed for small and medium-sized fire detection systems with 4 and 8 loops.
Conventional ECS 80 Fire Control and Signaling Equipment are designed for small and medium-sized fire detection systems with 4 and 8 loops. ECS 80-4C and ECS 80-8C allow the building to be secured by controlling 2 CMSI functions with power failure.
EMPERTECH Conference System is to satisfy the customer’s needs to complete the one-stop solution for end users. Each of the Empertech conference system is catering to different specific applications from small to large conference environment.
Optical Alarm Signalling Devices has the flash color, white or red, and the flashing frequency, 1 Hz or 0.5 Hz, can be set using the switches.
ES Optical Smoke Detectors are scattered-light smoke detectors for reliable early detection of fires.
Electronic Modules are designed to be controlled with 12 volt circuit e.g. system 8000 / IQ8Control via transponder or Fire Alarm Control Panel.
Electronically Controllable Line Sources have integrated digital 8-channel DSP power amplifiers are excellent on the system Voted.
LFI series are active, electronically steerable line array. They are equipped with 16x4in, 24x4in and 32x4in Neodymium Speakers, which are characterized by their particularly long stroke.
The LFI-220H series is generally used where conventional methods of Sound, due to difficult acoustic conditions, does not get any further. The Electronically Steerable Line Array is an active, electronically inclinable line source in black or white.
The LFI-350H series is generally used where conventional methods of Sound, due to difficult acoustic conditions, does not get any further. The Electronically Steerable Line Array is an active, electronically inclinable line source in black or white.
End-of-Line module EOL
Esser LCD Indicator Panel includes 10 Programming Interfaces, Internal Buzzer, Programmable Relay.
Optical smoke detector which works using the light scatter principle to guarantee safe and early detection of fire.
Essernet Micromodules are a network interface module such as essernet module, however it is used for max. 31 network participants.
Ethernet Touch Call Station
Ex-barrier is designed for conventional operation of intrinsically safe detectors.
Expansion Modules are plastic mounting tray for up to four modules & They connection to the relocated shouldered plug-in terminal is made over a preconfigured plug-in cable.
Expansion Unit for COMPACT 9 is a 10-line extension unit for the COMPACT 9 master station. The unit has a wall-mounted enclosure with battery compartment for backup power and charger.
Explosion-Proof encapsulated conventional MCP for hazardous areas in conformity with EN 54-11 Type B for the manual actuation of a fire alarm and/or a hazard alarm, as a detector for usage in explosion-hazardous areas both inside and outside.
The extension module is plugged onto the interface board of the control panel. This extension module can be used on plug connectors 1 and 2 of the basic control panel module.
Extinguishing Control Panels 8010 are electronic control devices for extinguishing systems with integrated fire detection module, compatible with series 9200 and IQ8Quad detectors. They are additionally provided with respective detection zones.
Extinguishing panel for extinguishing zone control in compliance with VdS 2496, with integrated fire detection unit and optional convenient operating and indicating panel
PanelSafe is a stand-alone fire detection and extinguishing system and is design to be an extremely cost effective fire detection solution for EDP server, telecommunication devices and switch cabinets.
Honeywell’s software driver is designed for connection of Extron media control and touch link panels.
FAAST LT-200 EB 2 with 2 channels, loop ready
The FAAST LT-200 EB active fire detection system, is equipped with a laser smoke detector. It’s possible to connect up to two pipelines to one channel. The FAAST LT has a preconfigured esser bus coupler for connection to the esser bus ring bus line.
I/O Terminal Card for fire alarm panel (FACP) 8008.
1-loop Fire Alarm Control Panel
Detector Series ES Detect and conventional devices are compatible with this FACP.
Microprocessor-controlled fire brigade display panel FAT 3000-EDP acts as an additional display device for a FlexES fire alarm control panel. Serial connection to the fire alarm control panel is done via the RS485 interface.
Control panel for fire alarm systems with transmission device to the fire brigade. Connection and operation take place via the RS485 interface of the FlexES Control fire alarm control panel.
FIOS mounting kit for DCSF1/12 call station
FX808383
Pluggable Fiber Optic module for the fiber optic switch 583394.11 in 1310 nm multimode. This provide a Fiber Optic cable length up to 2 km.
Fibre Optic Converter for Essernet devices for C-rail mounting & Its Depending on the glass fibre used, distances of up to 3km are possible. Suitable for 50/125μm and 62.5/125μm multi-mode fibres.
Fibre Optic Convertors are required for connection of digital call stations DCS or universal interface module UIM to VARIODYN D1. If the system is in use for VA purposes, it is necessary to provide power either from 24 V DC source or from a battery.
The LWL-Switch is used for designing an ethernet network in loop topology. On account of the loop structure, the network is fully redundant since, in the case of an LWL fibre rupture.
Field Bus Interface Plus is used for interfacing for the programming of the FACP 8007, 8000 C/M, 8008, gateway, ABIGA and Extinguishing Control Panels 8010 or for the direct field-side connection of a single installed loop.
Fieldbus and Central Interface by Esser is designed for 8000 tools.
Fire Alarm Computer Plug-In Cards provide a modular design with different micromodules and individual extension concepts, that allow the Fire Alarm Computer to be easily adapted to special requirements.
Microprocessor-controlled fire alarm control panel with 4 or 8 detector zones used for connection to automatic conventional detectors (76xxxx) and manual call points of Series 9000 without switch-on control.
The 8008 fire alarm panels meets the highest safety standards for comprehensive fire monitoring. Fire alarm control panels has been designed for large buildings with complex safety needs.
The 8000 C fire alarm panel meets the highest safety requirements for comprehensive fire detection. It makes use of proven and trusted technology packaged in a completely innovative modular housing concept.
The Microprocessor-controlled fire alarm panel in accordance with NF EN 54-2, NF EN 54-4, NF S 61-936, and NF S 61-940. Managed evacuation unit (UGA) include with it’s own security power supply in accordance with NF S 61-936 (1999).
Fire Brigade Control Panel
The fire brigade control panel is an additional device for fire alarm systems with transmission devices to the fire brigade. The main display and control elements of the fire alarm control panel are on the fire brigade control panel
Fire Protection Housing
The addressable Fire Safety Control Unit, CMSI 8000 with functions in a box, provides compartmentalization, smoke extraction and people evacuation functions.
Delta Compact Apollo has the ability to communicate with other Delta DA units and can therefore be integrated into large monitoring systems. Delta Compact is available with eBus and big mimic.
Flame Detector
Drivers are an integral part of the Management Building System by Esser. They automatically create new alarm points in the FlexES Guard database that can be displayed using filter functions.
External System Driver for the FlexES Guard server permits the use of external systems in FlexES Guard. Depending on the protocol, the driver automatically creates new alarm points in the FlexES Guard database.
Indicator and Operating Modules are used for displaying the current smoke density and the alarm level of the LRS 100 detector unit and the LRS compact/net. The unit is also equipped with 7 freely configurable, floating contacts.
Flush-mounted volume controllers are regulators for 6/12 watts with duty relay (24 V DC). The relay is active during normal operation in Fail-to-Save-series. The controllers are available in pure white satin finish.
Flush-mounted XLR panel jack
Power Amplifier 4 X 250W, included battery charger
GMT 4000 Repeater Panel
General Supplies includes various accessories for 19 inch Rack.
The Esser’s VARIODYN® D1 power amplifiers have four independent amplifier channels and are compatible with the VARIODYN D1 system. It has integrated electronic protection against thermal overload and short-circuit. It has efficiency higher than 80%.
HMI Control Card FACP 8000 / IQ 8 Control With Switch-mate.
Hand-Held Microphones are available with announcement key in order to talk directly into the Comprio control unit. They are inserted into the socket directly on the front of the Comprio.
Hand-held microphone for VARIODYN D1 Comprio
High performance Horn Loudspeakers are used for acoustic signaling wherever explosive gases, vapors and dusts can become dangerous.
The Horn Loudspeaker is a water proof horn speaker made with ABS plastic. The speaker is designed to provide a perfect solution for both clear vocal reproduction as well as for background music.
L-VHP15A/EN is a high-performance 15W voice alarm horn loudspeaker.
Housing Glass Pane is a surface mounted cabinet. These housing is MCP housing Alu glass pane.
Housing for Ex barrier
ICAM Pipe Kits by Xstralis are provides full and comprehensive integration of your smoke and gas detection systems.
IED Smoke Extraction Floor Interfaces are allowing, on 1 level, the management of detectors, manual control and shutters smoke extraction.
Kit for integrating an IQ8Control fire alarm control panel into an IGIS-LOOP.
IQ8Alarm Plus is the most cost-effective and reliable-way of alarm signalling. Its outstanding features significantly outperforms with the completely loop powered optical alarm signalling as well as different voice messages in up to 5 languages.
IQ8 manual call points are suitable for esser bus and powered loop connection, with soft address coding, alarm latch and alarm indicator.
Module with 1 technical input plus 1 relay output with built-in loop short-circuit isolator, for connection to the esserbus fire detection loop without the need for external power.
IQ8Alarm plus Sounders are addressable, completely bus supplied and short circuit / open circuit resilient voice sounder in with integrated voice messages and signalling tones for acoustic alarm signalling.
IQ8Alarm Plus/Sounders are Addressable, completely bus supplied and short circuit / open circuit resilient fire alarm sounder with integrated signaling tones for acoustic alarm signaling.
IQ8Alarm/Sp Signaler with Isolator is an addressable, completely bus supplied and short circuit / open circuit resilient alarm signaling device with up to 20 different programmable signaling tones including DIN tone.
The IQ8Control battery monitor module are inserted between the 12 V battery to be monitored and the associated connection contact of the basic module of the FACP.
The IQ8Control M as an efficient fire alarm control panel for the property supervision of midsized to large objects, facilitates simultaneous detection, control and alarm signalling both on the analogous ring as well as on on the spur
The micro modules are designed for IQ8Control C/Intelligent Addressable Fire Alarm Control Panel.
Network interface modules for up to 16 resp. 31 network nodes for IQ8Control C/M.
IQ8Control extension housing for multiple appliations
The LCD indicator panels are used as an add-on device for the remote display of FACP status information of the System 8000 IQ8Control and FlexES Control relating to detectors and detector zones.
IQ8Quad Detector Demo Case is a Demo Case with a built-in IQ8Quad detector with integrated alarm device for demonstrating the whole range of multi sensor functionalities.
Optical Smoke Detectors guarantees safe and early detection of fire. The detectors are provided with an integrated isolator and a parallel detector indicator can be connected.
The IQ8Quad Multisensor Fire Detectors are used to detect different types of fire from smouldering fires to open fires with constant sensitivity level. Smoke sensor signal ensures smoke classification and reduction of false alarms.
Radio interface allows the IQ8 manual call point (small or large design) to be connected on the wireless esserbus-PLus.
Essers’s indicating & operating panels provide microprocessor-controlled interface for networked fire alarm control panels. Its programming can be done with System 8000 customer data editor. It has TTY or RS485 interface to connect remote printers.
ECP 8010 Indicating and Operating Panel can indicate integrated detector zones in German. It can be set to status indication for control outputs and LED for relevant extinguishing system function indication.
Indicator/Operating Module are accessories designed for Aspirating Smoke Detectors.
Variodyn D1 Input Cabling
Installation Kit for Redundant DCS are needed to install a paging microphone in a table surface or the 19" panel (Part No. 583709).
9200 series detectors are available as optical smoke detectors, heat detectors, ionisation smoke detectors or multisensor detectors, combining one.
Detector interface is an accessory of Intelligent Fire Detector for visual display of sensor status on a PC.
Intelligent addressable IQ8Alarms are addressable, completely bus supplied and short circuit / open circuit resilient alarm signaling devices for optical alarm signaling.
8 Zone Interface Card is used for Manual Call Points in CMSI type B
For the serial essernet interface for a length up to 15 m.
Interface modules are equipped with a 100 V transformer and adapted for 2.5 W used with the electronically steerable line source speakers. They forms the first electronically steerable line source speaker in the world with Loop Technology.
Intevio extension keypads are for use with remote call stations. Models available with four function buttons/LED indicators, and eight function buttons/LED indicators.
Ionization Smoke Detectors are designed for conventional fire alarm control panels.
K76134X Flame Detector
K7717
K7723
Relay module with freely programmable output functions, each of which can operate as an NC or NO contact (not monitored) for potential-free activation.
Controller Module
Keyboard Cover for DCS VARIODYN D1 call station is a transparent key cap to protect from accidental key presses. So, pressing the keys is only made possible with an open cap.
L-Form Cable Binding Strip For Cabinets. Due to customized preparation and quick installation this cabinet solution meets the demand for fast implementation of a network structure.
LED Indicator Panel with 32 LEDs for operation as a remote indicating panel for up to 32 alarm, fault or common indicators. With integrated buzzer, buzzer off and lamp test button.
The linear smoke detector with a flame resistant ABS plastic housing in compliance with EN 54-12 consists of detector, operating and control unit.
Aspirating Smoke Detectors are based on laser technology & They optimized for use in the air conditioned areas (e.g. data processing rooms), laboratories and clean rooms, rooms with valuable things (e.g. museum).
LRS 300 PC Interface used as an alternative to the programming unit. All components on the VESDAnet™ can be programmed via the interface.
LRS Aspirating Smoke Detectors are early fire detection systems based on laser technology. The system is optimized for use in the following areas: air conditioned areas, laboratories and clean rooms, rooms with valuable things (e.g. museum).
The Active early-warning fire detection system for the esserbus, based on laser technology. Programming and commissioning possible via the fire alarm control panel (System 8000 / IQ8 (Control).
LRS LCD Programmers are the programming units for smoke aspirating systems and offers easy programming with a LCD graphic user interface.
Laser Pointer Unit highlights the cone of vision enabling the designer/installer to identify best position to mount the flame detector to give optimum coverage.
To lock and unlock the HMI, housing and printer frame respectively of fire alarm panels 2001, 8007, 8008, 8000 C/M, IQ8Control C/M, FlexES and extinguishing panel 8010.
Linea LEN-100 Loudspeakers are passive 100 V loudspeakers, with weatherproof aluminum housing, designed for use with voice alarm systems equipped with two high-quality 4in drivers with treated cones for optimum efficiency in speech and voice alarms.
Linea LEN-150 are passive 100 V loudspeakers, with weatherproof aluminum housing, designed for use with voice alarm systems equipped with two high-quality 4” drivers with treated cones for optimum efficiency in speech and voice alarms.
Linea LEN-20 are passive 100 V loudspeakers, with weatherproof aluminum housing, designed for use with voice alarm systems equipped with two high-quality 4” drivers with treated cones for optimum efficiency in speech and voice alarms.
Linea LEN-220 are passive 100 V loudspeakers, with weatherproof aluminum housing, designed for use with voice alarm systems equipped with two high-quality 4” drivers with treated cones for optimum efficiency in speech and voice alarms.
Linea LEN-60 are passive 100 V loudspeakers, with weatherproof aluminum housing, designed for use with voice alarm systems equipped with two high-quality 4” drivers with treated cones for optimum efficiency in speech and voice alarms.
Linear Smoke Detector LRMX with a flame resistant ABS plastic housing consists of detector, operating and control unit. The LRMX has a range of 40 m using one single reflector.
Module in plastic protective housing for connection of an esserbus / esserbus-PLus loop, but with galvanic isolation (GI).
Loop Isolator Module LIM
Loop LED Remote Indicator Panel is for displaying 32 messages but with integrated and wired esserbus transponder 32 LEDs for operation as a remote indicating panel for the esserbus.
Loop card esserbus/esserbus-PLus Module for FlexES control module in a plastic protective housing for connection of an esserbus / esserbus-PLus loop.
Aluminium Housing for Manual Call Point are available in different colour as well as with or without print.
Spare glass pane by Esser has a white stick-on foil and printed pictogram and is an integral part of small Manual Call Point.
MCP Electronic Modules are designed for FACP 80 Control Panels.
MD4L Addressable Remote Hardware's with 4 remote control lines with position control and an integrated power module delivered pre-wired inside the box.
The accessories are introduced for MGN under the VoCALL System range.
The MI-LPB2 are addressable reflector- type linear optical beam smoke detectors, designed to operate as a component of an intelligent fire alarm system.
The MSR Detector is a new generation detector with a multi sensor system, consisting of several closely arranged sensors.
Main Back Plane is designed exclusively for FlexES Control.
Mains Switching Unit MSU
Manual Call Point Housing for emergency and hazard alarms (NGRS alarms).
Master Box Interface Module is used for activating and processing acknowledgement signals from master boxes. It is programmable as constant or pulsed master box activation.
Main clock for the implementation of time controls in the VARIODYN® D1 system. The main clock connected to the VARIODYN® D1 system via UIM (Part No. 583331.21
The Metal Sound Projector has wide frequency response with high efficiency. Sound projector has excellent application in hotels, shopping malls, airports and Platforms due to its modern design.
Metal rear cover for 582408.SAFE
VESDA-E VEA Microbore Tube Cutter are used for cutting microbore tubes.
Microphone Stands are used to hold gooseneck microphone which are designed to fit on top of an office desk, receptionist desk or gate desk.
System-tested sensing microphone for automatic volume control (AVC) of the VARIODYN D1 system. The microphones are installed in the affected area and connected via the XLR socket to the appropriate DOM input.
Adapter module ADP-N3EU-EDP is microprocessor-based device for installation in FlexES fire alarm panel. The RS 485 interface of the fire alarm panel can be used as a redundant data bus with this adapter.
Microprocessor-controlled fire department indicating panel in compliance with DIN 14662 as an additional indicator for fire alarm panels
Modbus Server is effective in early detection of fires with multisensory technology. It has integrated microprocessor with the possibility of counting fire, fault and operating time events.
Modems are avaiIable in SDN and VOIP type.
Mounting Chassis (Set) with Lateral Electrical Perforation are customizable and quick to install .This cabinet solution meets the demand for fast implementation of a network structure.
Mounting Clip is an accessory for 25mm pipe.
Mounting Kit contains 24 cage nuts, screws and washers.
Mounting Rails by Honeywell are vertical or horizontal mounting rail for cabinet frame with or without hinged frame.
Mounting bracket for lintel installation
Mounting kit for ALR microphone Part No. 581316.
Network card essernet modules for FlexES control are used for up to 16 and 31 network devices. Modules are designed with plastic protective housing with LED displays for speedy indication of the operating status.
Network Card Essernet Module for FlexES Control can be used for up to 31 network devices. The transmission is via Token-Passing protocol, similar to DIN 19245-1 (Profibus) with loop topology, interruption and short-circuit tolerance.
O2 T-multisensor detectors are designed for operation on the analog loop of the fire alarm system 8000 or IQ8Control. These detectors are suited for mounting in approved ceiling lights.
OHI- Multisensor Analog Detectors are designed for conventional fire alarm control panels. All detectors are provided with switch-on control.
WINMAG Plus License is an option for WINMAG / WINMAG Plus that has been specially developed to meet the requirements of managing and integrating hazard detection systems on a single PC platform.
OT Multi-sensor fire detector are integrated with optical sensor and heat sensor which give both a combined signal as well as a separate heat signal for improved false alarm management.
Multisensor Fire Detector with integrated smoke detector, heat detector and gas sensor (CO) with enhanced false alarm management useful for preventive and early detection of deep-seated smouldering fires.
Optical Sensors are introduced under Supported Products for SenTRI 2 system.
The Optical Sensor Sounder is introduced under fire detection and alarm system.
Optical Smoke Detectors are used for the early detection of fires with clear smoke development. Conventional smoke detector are without switch-on-control, with alarm latch and alarm indicator.
Optical Smoke Detectors works using the light scatter principle to guarantee safe and early detection of fire. Responds well to slow-burning, smouldering fires.
Output Cable DOM-AMP are used for prefabricated cabling to connect amplifier channel to each loudspeaker line in 1/18, 1/24 and 2/12. Backup Cable RC 41 VARIODYN D1 are used for 3:1 average in conjunction with 4-channel amplifier 4XD125B or 4XD250B.
Overvoltage Protection for UIM Contacts which has 48 contact inputs or outputs. These inputs and outputs are divided into 4 blocks, each with 12 pieces
Esser’s PAMMI Plus Light Software is a combination of the Pammi Plus Server and the Pammi Plus Client that allows you to have all the functions of the Pammi Plus management system on a single management station.
PAMMI Plus Server application realizes system control and communication with the components of the VARIOIDYN D1 voice alarm system and the PAMMI Plus client via Ethernet.
PAMMI Plus Server Softwares are used in combination with PAMMI Client Softwares so that the entire PAMMI Plus management system can be operated on one PC with full functionality. Software license includes USB dongle.
PIXI Journal-Printer
PanelSafe Slave Connecting Cables are 5 m length cables having 9 pin D-Sub Connector Plug version. They are available in grey color.
As FX808353, but as an internal version preinstalled in a neutral filler panel front. The filler panel fits into FlexES housings
Peripheral Cards are required for the essertronic 8007.
Peripheral clip for top hat rail is used to connect peripheral components, such as for example analog microphones, to the VARIODYN D1.
Pipes are accessories designed for Aspiration Smoke System.
Plastic Key of type D is used for all manual call points of large design.
Plastic Spare Key for small manual call points. This plastic service key the housing is push opened to replace the glass pane and the test functionality of the manual call point is activated and reset.
Plug-in module elBus
The M20 Cable Gland is used for cable entry. It is manufactured from Polyamide material having IP 67 protection.
Honeywell provides power supplies for fiber optics which are used in non-security applications.
Power supply for telephone interface Doormaster 586116
Printer Kit for IQ8Control C/M
Profile half-cylinder with standard closure
ProxKey III™ key fobs come non-programmed or programmed with a 26- or 34-bit format.
Push-to-talk-Microphone
RK-MCU INTEVIO master control units are the central management device of the INTEVIO PA/VA system, which is used to manage and monitor all devices and perform various operations.
RS232 Interface Module is for the serial essernet interface for a length up to 15 m.
Cable Clamp Rail for DOM for mounting in a swing frame cabinet. The cable clamp rail is used for neat cable laying and strain relief of the cables behind a DOM. It is recommended to use such a cable rail per DOM.
Recessed ceiling loudspeakers visually blends into the ceiling due to its flat design. For additional operational reliability the speakers are equipped with cable junction box integrated ceramic terminal and thermal fuse.
Remote Indicators has Red LED display for surface mounting installation, with protective circuit for connection to 781590 detector base and 805590 IQ8Quad detector base.
The visual action indicator is used for the rapid localization of detectors in alarm in inaccessible places (ventilation, false floors, false ceilings, attics, etc.).
Replacement mA display module for touchpoint controllers.
Reset Module is an interface allowing the automatic reset of special detectors connected to intermediate units OI 3000 or OI 3001.
Ionization Smoke Detectors introduced by Esser are of S-3000 type.
SDA 3000 Key Depot Adapter Establishes the connection between FSD and BMZ. It is the adapter for connecting an FSD type basic to a fire alarm control panel.
The optical smoke detectors have decentralized intelligent signal processing and are therefore on the spot with eyes and ears. The SDN detector is very insensitive with a relatively high correlation standard value.
SEI Serial Essernet Interfaces has been optimized with respect to the transmission speed and provides optimum comfort in programming, commissioning and service.
SEI Serial Essernet Interfaces EDP can be used as a gateway to link remote computers that support the ESSER data protocol (EDP) & The EDP version (unidirectional) is only provided with information from the essernet, remote control is not possible.
SOLO Smoke Detector Test starter Kit of 6m includes one 4.5m SOLO fibreglass telescopic extension pole and one SOLO 330 aerosol smoke dispenser.
SOLO Telescopic Fibreglass Pole is extends upto 1.13m in 4 sections allowing access to detectors fitted up to 6m.
Sample Tubing Pipes are also available in V0 FIREPROOF material and in WHITE ABS material. To place your order, add / V0 or / B respectively to the pipe reference. Supply on request, check prices and delivery times.
Sampling Pipes Fitting are also available in V0 FIREPROOF material and in WHITE ABS material. To place your order, add / V0 or / B respectively to the pipe reference. Supply on request, check prices and delivery times.
Sampling Point Kits of 8 points are available in red and white color with pack of 5.
Scorpion Control Unit is a portable test device that connects to the access point and can acid the test from a handheld device.
Scorpion Control Unit Panel SCORP 8000
Common accessories and spares for the Sensepoint, Sensepoint XCD, Sensepoint XRL, Series 3000, OELD and RAEGuard 2
Serial Connecting Cable is used for connecting the field bus interface to panels 8007, 8000 C/M, 8008, Gateway, ABIGA and IQ8Control.
Series IQ8Quad Smoke Detectors are for safe and early detection of smoldering fire. Some of the detectors have sensor principle for consistent response performance against false alarms while some work using the light scatter principle.
Signal/Control/CAT5 Patch Cables are prefabricated cabling from 12 control contacts of the UIM to the cabinet rear panel. Cable set are used for connecting batteries to the emergency power supply. Up to 4 pieces connectable are used per UIM.