Plug Cable Connectors are used for direct connection between the panel cards and the field marshaling terminal blocks.

Termination Cables are required for safety bus (mono/duplex) control boards.

The cables with plug connectors are used for direct connection between the panel cards and the field marshaling terminal blocks

The Plug connectors along with the 16 cables are used for direct connection between the panel cards and the field marshaling terminal blocks. Cables with two connectors are also available (R suffix), which contain the termination and connections.

The Safety Bus Programmer that can be used to set the CAN BUS address of Safety Bus modules. It has quick connector for connection to the modules and low battery indicator.

Termination board for control cards

The SB-ECM Module manages automatic fire extinguishing release system. Controls 8 supervised safety related inputs and 6 supervised safety related outputs.

The Safety Bus system allows the fire detection and the firefighting control in a unique bus assuring a high safety level.

Honeywell F4003 Analog Input Device Control Card is eight 4-21 mA analog input card, with two thresholds that can be set through the panel keyboard

Honeywell SB-F7011 safety bus system allows the fire and fire & gas detection and the firefighting control in a unique bus assuring a high safety level

Honeywell F6001 Control Card gathers and deploys the signals and logic associations relating to fire extinguishing control. It does not have physical I/O, but uses inputs and commands managed by other cards of the H-S81-HS system.

PU-A0004-1 Battery Chargers are uninterrupted power supply (UPS) units, which can control and charge two 12V, 65Ah batteries. The batteries are charged separately from the load and, in case of any fault they are switched on to the load immediately.

The cable termination cards T9001-1 are used to connect the field devices in the HS81-HS panel. It is used to increase the resistance of the system to over-voltage that might be caused during the connection of devices in some critical applications.

Cable Termination Cards T9003 is Over voltage Protection for F700X It to increase the resistance of the system to over-voltage that might be caused during the connection of devices in some critical applications

Control Channel Card by Honeywell Industrial Fire has 16 non-monitored 250-mA outputs. It is widely used for controls and direct hardwiring or in conjunction with a 16-relay card (S81-T8007-2).

CCT6 Card Termination Connection between the card and the field is carried out by means of a special cable, provided with a plug-in connector at one of its ends

The cables with plug connectors are provided with 4 wires and used for direct connection between the panel cards and the field marshaling terminal blocks.

The F3002 8-Input Card can manage conventional detection lines. It is particularly suitable for systems where detection lines are already in place, for cross-line logic control of automatic fire extinguishing systems, or in intrinsic safety systems.

Plug Cable Connectors are used for direct connection between the panel cards and the field marshaling terminal blocks.

Iride is a supervision program that allows computer-based event management through animation and graphic pages.

The Safety Bus system allows the Fire and Fire & Gas detection and the firefighting control in a unique bus assuring a high safety level.

The Fire and Smoke Detector Interface module is used with conventional fire and smoke detectors located in hazardous areas.

The Modbus Protocol Serial Communications Card address and parameter configuration through two 8-selector dip switches. It provides two independent output ports: one RS485 (Half Duplex) and one RS232.

The Safety Bus system allows the Fire and Fire & Gas detection and the firefighting control in a unique bus assuring a high safety level.

The SB-CM Safety Bus systems allows the fire detection and the firefighting control in a unique bus assuring a high safety level. SB-SCM module can control eight 500mA outputs for controlling solenoid valves with safety-related functions.

Honeywell Industrial Fire CPU Card is the system's central unit and contains the micro-controller, which processes all the information provided by the other cards of the panel.

The 5-port Entry-Level Managed Ethernet Switch is designed especially for industrial applications. The switches support a variety of useful management functions, such as Turbo Ring, Turbo Chain.

The Compact Industrial Fire Controller provides an integrated industrial protection system that includes flame, gas and smoke detection, suppression and extinguishing capability.

Honeywell F7009 Analog Addressable Device Control Card is for addressable devices that require APOLLO DISCOVERY and XP95 protocols

F5002 card has 16 non-monitored 250-mA outputs. It is widely used for controls and direct hardwiring or in conjunction with a 16-relay card (S81-T8007-2)

Honeywell Line Control Card has eight 500 mA outputs and it is particularly suitable for handling automatic fire extinguishing systems, where it can be utilized to control extinguishing agent release and directional valves.

Analog input device control cards can control all the 4-20 mA output transducers normally used for explosive and toxic gas, oxygen, temperature and level sensors.

F6001 Control Card gathers and deploys the signals and logic associations relating to fire extinguishing control

Honeywell Analog Input Device Control Card with two thresholds that can be set through the panel keyboard. It can manage gas detection systems, level and temperature signal systems

Loop Control Module is found for addressable devices using the SSP protocol.

Input module is suitable for controlling detection systems with conventional lines and can be used in systems with already existing detection lines for controlling automatic fire extinguishing systems with double enable logic.

Analog Addressable Device Control card for addressable devices that require APOLLO DISCOVERY and XP95 protocols.With these protocols a wide range of fire detectors, push buttons, optic-acoustic signaling and input/command modules are available.

Honeywell F7002 Analog Addressable Device Control Card is for devices that are addressable through the HOCHIKI ESP protocol

Honeywell F5003 Alarm Control Card is suitable for use in systems that include devices conforming to the NFPA standards, where it can activate the alarm sounders

Honeywell F5004 4-Monitored Line Control Card is particularly suitable to manage automatic fire fighting systems, where it can be used to operate extinguishing agent release solenoid valves, or visual-audible evacuation and alarm devices.

Honeywell F4001 Analog Input Device Control Card has one 4-21 mA analog input card, with two thresholds that can be set through the panel keyboard. It can manage gas detection systems, as well as level and temperature signal systems.

Honeywell F4002 Analog Input Device Control Card is two 4-21 mA analog input card, with two thresholds that can be set through the panel keyboard

Honeywell Power Supply available in several sizes of feeders 2.5, 4 or 20A and can be paralleled

The components are introduced for Programmable System S81-HS.

Power Supply Set is introduced for H-S81-HS control panel.

HS81-HS-BASE

H-2HR

The Media Converters are equipped with a multiple interface circuit that can handle RS-232 or RS-422/485 serial interfaces and multimode or single-mode fiber.

The Honeywell S81-F7012 System Sensor Loop Control Card controls one SLC loop with System Sensor devices, such as smoke detectors, heat detectors, multi-criteria detectors and pull stations

Safety Bus Modules allows fire, fire gas detection and firefighting control in a unique bus assuring a high safety level. They are composed by one or two control panel cards and can control eight supervised input for conventional sensors.