You are browsing product catalog for
1 Zone+5 detector kits consist of a VSN-PARK1 one-zone control panel and 5 VSN-CO detectors.
Morley IAS’s 1 Zones expansion modules iw used for expansion of VSN-PARK1/2 carbon monoxide detection panel. Each module supports a maximum of 32 detectors (16 detectors/zone) and it is provided with 10 status LEDs, 2 level relays and 1 alarm relay.
CPU Cards are required for system / sub-centers or parallel panel control.
The 3170 Series Panel PCs are high performance Intel Atom processor based 17 inch TFT type LCD. They also support a wide operating temp and power inputs.
Kentec’s 4 way plug-in sounder cards simply plug in to any series 3000 conventional main PCB to give 4 additional sounder circuits.
6700 addressable fire alarm control panels include connected panel options, enhanced communications, wireless detection and other advanced features. The panels can be configured to achieve an overall point capacity of up to 100 points.
The 198 point addressable fire alarm control panels include connected panel options, enhanced communications, wireless detection, and other advanced features.
The 1,110 point addressable fire alarm control panels include connected panel options, enhanced communications, wireless detection, and other advanced features.
6820EVS intelligent addressable fire alarm control panels with emergency voice system can connect up to 17 panels with convenient single point communications.
The module range be input module oc output module. K Hyfires wireless in expander module.
The 7075 Series is a compact, cost-effective, analog addressable fire alarm control panel, capable of supporting up to 75 detectors and 75 modules, using Velocity protocol.
851C series smart detectors and modules
The E3 Series® from Gamewell-FCI is the most sophisticated, yet customizable and cost-effective fire safety system available.
AFP-100 Series Replacement Board
AM-8000 are RISC high speed microprocessor fire detection control panels which can drive 2 analog loops and it’s expandable to 4 using an additional LIB-8000 card installed inside the panel.
AM-8200 are multi-processor Fire Detection systems suitable for system configurations of a wide range of installations. They are used in many applications, like hotels, offices, hospitals, industrial environments and production facilities.
Ademco CNx Series Expansion Card with 2 analogue loops has capacity of 99 detectors plus 99 modules per loop.
The ID3000 is a flexible, modular control panel, built from various option modules. Each module is supplied with required mounting screws, connection cables, washers etc. and installation instructions.
The BSX 10 Rectifier TR 10 is user-friendly and has an elegant look. It has 2 outputs for door magnets.
BSX 100 centrals are suitable for small businesses, schools, meeting rooms, kindergartens and single-family homes. This centrals are available with 2, 4 or 8 loops and they are easy to install, affordable and reliable.
The Titanus Pro Sens EB can be directly connected to the esserbus / powered loop. The device is supplied with front foil for single-tube operation.
AM-8200-BB is the Blank Box Expansion of the AM-8200 control panel from 6 to 8 Loop Advanced without LCD display. It can be installed directly under the control unit. Equipped with 5.5A power supply.
Carbon Monoxide (CO) detection control panels are designed for applications where concentrations of CO may accumulate and needs to be controlled in order to protect lives. The panel is able to accommodate 1-4 supervised detection zone.
CPU card is used for operating the operating system in NGB / NZB systems. It has Battery for memory, Input for MMC card, Programming port, Port for internal printer (back), Rack plug and Plug for display unit.
The CPU panel control unit cards used for installation in 8008 or 8010 series fire alarm panel.
Honeywell Morley Lite are compact, high performance, feature enriched Fire Alarm Control Panel designed to meet the fire detection addressability and are ideally suited for small to medium sized buildings, healthcare, etc.
Comfort Repeater Panels for ECS 80. Provide feedback from the heating system fire detection (SDI) and / or the alarm management unit when integrated into the SDI.
The Compact Industrial Fire Controller provides an integrated industrial protection system that includes flame, gas and smoke detection, suppression and extinguishing capability.
Single loop intelligent fire alarm panels supports VIEW™. They comes with 16 zonal LED's, sounder circuit, 1.5A/3A power supply, space for 12/42Ah batteries and are available in Black/Grey color.
The corridor databus termininator -passive- closes off the room bus (data and audio) with the related impedance.
iLumTech DALI PLC Bridge belongs to the Connected Lighting product family. This powerful device is used for connecting two or more DALI networks over mains. It means that it couples DALI communication to the mains and vice versa.
Eltek’s DELTA alarm storage tables are for operation of fire alarm that is alarm stored. It provides opportunity to get in clear text information about where the alarm is triggered and maneuver the alarm storage function.
The Delta Compacts by Eltek are centralized fire detection and alarm control unit that complies with EN54.2 and EN 54.4.
The Morley-IAS DX Connexion panel is ideally suited for use in the protection of small to medium sized buildings.
The DX Connexion is an enhancement of the Morley-IAS Dimension panel range. The DX Connexion Panel series also include the modular unit PCB and Base Card.
Morley-IAS Fire Alarm Control Panel has qualities of reliability, flexibility and value with advanced features and intuitive functionality.
Delta Sub Panels have a decentralized Detection and Alarm Module for Apollo detectors. They are used together with the DELTA OP or as a standalone Detection and Alarm Module in a network. They contains 4/2 loops and eBus for bus communication.
Delta Compact Complete Front available with Fire Alarm Equipment.
Eltek’s delta DA quad marine addressable detection and alarm-modules are cost-effective modules for decentralised solutions. It has 2 analogue loop, 3 monitored voltage outputs, 2 voltage-free relay outputs, 1 monitored multi-function output, 1 eBus.
Eltek’s delta DA quad monoloops are used as fire detection and alarm modules for use in buildings.
The Delta Fire Extinguisher Panels by Honeywell are delivered in 1- or 2-zone versions for release of extinguishing agent. The fire stations have a built-in control panel with eBus for connecting the fire station with other networks.
Eltek’s Delta OP control panels are control units for displaying the status of a Delta emergency lighting system. It is equipped with a graphic display, communication output for direct connection, input for direct PC programming of connected devices.
Eltek’s Delta OP monitoring devices address maintenance of safety and signal lights. The Delta OP has a graphic display, bus adapter for eBus network and port programming for pc.
Delta/ANX 95 conversion kits are used to recessed OP kit in ANX 95 cabinets.
E-NET 2 Motherboard
E3 Series CLSS Gateway Bundle enables us to read the connected device system inventory from one panel or a network of panels and transmitting this data to the Connected Life Safety Services (CLSS) Cloud.
The Intelligent Loop Interface-Main Board with the built-in network and the serial protocols,, results in a building block approach to the fire alarm panel design.
The conventional ECS 80 Fire Control and Signalling Equipment are designed for small and medium-sized fire detection systems with 4 and 8 loops.
ES-200X fire alarm control panels (FACPs) come with a pre-installed communicator and support up to 198 addressable devices (99 detectors and 99 modules).
The ES-200XP FACP comes with a built-in dual path (IP/cellular) and dual cellular (AT&T/Verizon) 5G LTE-M cellular communicator and supports up to 198 addressable devices in any combination of detectors or modules.
ES-50X addressable fire alarm control panels come with a pre-installed communicator and support up to 50 addressable devices in any combination of detectors or modules.
The ES-50XP FACP comes with a built-in dual path (IP/cellular) and dual cellular (AT&T/Verizon) 5G LTE-M cellular communicator and supports up to 50 addressable devices in any combination of detectors or modules.
Empertech Central Processors provides convenient solution to monitor and control settings and events in complex public address systems space.
1-loop Fire Alarm Control Panel
Detector Series ES Detect and conventional devices are compatible with this FACP.
The FACP FlexES Control M is a modular loop technology fire alarm and control panel designed to monitor and alarm small to very large sized premises.
THe FACP IQ8Control M is a loop technology fire alarm and control panel designed to monitor and alarm medium to large sized premises.
Microprocessor-controlled fire alarm control panel with 4 or 8 detector zones used for connection to automatic conventional detectors (76xxxx) and manual call points of Series 9000 without switch-on control.
The 8008 fire alarm panels meets the highest safety standards for comprehensive fire monitoring. Fire alarm control panels has been designed for large buildings with complex safety needs.
The 8000 C fire alarm panel meets the highest safety requirements for comprehensive fire detection. It makes use of proven and trusted technology packaged in a completely innovative modular housing concept.
The Microprocessor-controlled fire alarm panel in accordance with NF EN 54-2, NF EN 54-4, NF S 61-936, and NF S 61-940. Managed evacuation unit (UGA) include with it’s own security power supply in accordance with NF S 61-936 (1999).
Fire Detection Panels are designed for the installation of fire detection systems of small and medium size. They are available in painted steel housing material.
The addressable Fire Safety Control Unit, CMSI 8000 with functions in a box, provides compartmentalization, smoke extraction and people evacuation functions.
NOTIFIER's FireWarden-100X Addressable Fire Alarm System, By Honeywell. The product has a 198 point single loop to meet the needs of the smaller systems addressable marketplace.
NOTIFIER's FireWarden-50X Addressable Fire Alarm System, By Honeywell. The product has a 50 point single loop to meet the needs of the smaller systems addressable marketplace.
NOTIFIER's FireWarden-100-2 addressable fire alarm systems each have a single loop to meet the needs of the smaller systems addressable marketplace.
NOTIFIER's FireWarden-100X addressable fire alarm systems each have a single loop to meet the needs of the smaller systems addressable marketplace.
Small and medium applications previously served by conventional systems are now migrating to addressable solutions. NOTIFIER’s FireWarden-50 can meet these application needs with advanced, addressable intelligence in a right-sized panel.
Small and medium applications previously served by conventional systems are now migrating to addressable solutions. NOTIFIER’s FireWarden-50X can meet these application needs with advanced, addressable intelligence in a right-sized panel.
The Flex 404 is a four zone fire alarm control panel (FACP). This control panel provides reliable fire signaling protection for small to medium-sized retail, office, multi-family, or other similar commercial or institutional buildings.
The Flex 505 is a five zone fire alarm control panel (FACP). This combination control and digital communicator panel provides reliable fire signaling protection for medium sized commercial, industrial and institutional buildings.
The Flex GF506D is a six-zone fire alarm control panel FACP that is used for single and dual hazard deluge and pre-action applications.
Flex Series fire alarm control panels provide reliable fire signaling protection for medium-sized commercial, industrial, and institutional buildings.
The Fuse Kit includes 15 Amp Fuse and 3 Meter PN Cable for batteries larger than 12 Ah.
G-100 control units are microprocessor system, which can manage both toxic and gas detectors explosive with 4-20 mA standard. The control units are available in a wall version and 6 19" Rack container unit with separate power supply.
HMI Control Card FACP 8000 / IQ 8 Control With Switch-mate.
The HMI is an ESA Automation entry-level solution with a 7in wide touch screen display equipped with TRUE-FLAT touch screen technology and dual RS232/RS485/COM0 serial port, able to combine high technology with a wide connectivity.
Hardware kits are for use with HPF24S6/8 power supplies.
Honeywell Industrial Fire CPU Card is the system's central unit and contains the micro-controller, which processes all the information provided by the other cards of the panel.
Notifier ID2002 Fire Alarm Panels are fixed 2 loop panels offering a technically sophisticated range of facilities and functions while remaining easy to install, program and operate.
NOTIFIER INSPIRE™ N16e is a cyber security enhanced modular, scalable and software enabled connected Fire Alarm Control Panel (FACP) for varied Life Safety System applications.
Eltek’s DELTA OP control panels are panels developed for both centralized and decentralized operation of Eltek's fire alarm system. It is a microprocessor-based control panel. It represents the important nerve center in the fire alarm installation.
The IdentiFlex 100 is a 25 point, single loop, addressable fire alarm control panel that supports Gamewell-FCI, Velociti Series detectors and modules.
LCD Remote Repeat Panel is a remote repeater panel for the AM-8200 control panel, with a 7in the colour touch screen display.
LCD touchscreen monitor by Honeywell It features intelligent gateways to facilitate modular system integration, allowing continued expansion of workstation and network functions.
NX30 Loop Control Module
Notifier lock, snap-in
Loop LED Remote Indicator Panel is for displaying 32 messages but with integrated and wired esserbus transponder 32 LEDs for operation as a remote indicating panel for the esserbus.
MRP-2001 6-zone fire alarm control panels are for single- and dual- hazard deluge and pre-action applications.
MRP-2002 agent release control panels are 6-zone FACPs for single and dual hazard agent releasing applications.
MS-2 & MS-4 are two and four-zone conventional fire alarm control panels, compatible with i3 Series smoke detectors from System Sensor.
Two-Zone Conventional Fire Alarm Control Panel
MS-5UD & MS-10UD fire alarm control panels provide reliable fire signaling protection for small- to medium-sized commercial, industrial, and institutional buildings.
FireLite’s MS-9600LS(E) and MS-9600UDLS(E) are compact, cost effective, intelligent addressable FACPs (Fire Alarm Control Panels) with an extensive list of powerful features.
Magicard Rio Pro badging printers and starter kits are available in a simplex and duplex version. They include a printer and five panel dye film for 300 images.
Spare power supply units are used as replacement supply units for mains powered distributed amplifier unit (DAU).
Honeywell provides marine onyx systems filter kits for Notifier’s marine-approved fire alarm systems.
Kentec’s multi-area extinguishant control panels can have any number of detection zones which can contribute to any number of extinguishant outputs as required. All the extinguishant outputs have a dedicated status and control section on the panel.
NFC- RPU is an Optional Remote Page Unit that is compatible with the NFC-50/100(E) Emergency Voice Evacuation panel for fire protection applications.
The NFS-320 is engineered for small applications, establishing fire protection in seconds..
The Notifier intelligent Fire Alarm Control Panel is part of the ONYX® Series of Fire Alarm Controls as a stand-alone small-to-large system, or as a large network, the ONYX Series of products meet virtually every application requirement.
NFS-SUPRA Control Panels are available in 4, 8 and 12 zones for fire detection. They can support up to 32 800-series detectors per zone. The operational performance of the panels are microprocessor-controlled and has several configuration options.
The NFS2-3030 is an Intelligent Fire Alarm Control Panel (FACP) designed for medium- to large-scale facilities. Fire emergency detection and evacuation are extremely critical to life safety, and the NFS2-3030 is ideally suited for these applications
The NFS2-640 is engineered for mid-size applications, designed to maximize flexibility and customization that meet your specific life safety needs.
NFS300 Fire Panel Kits offers technically sophisticated range of facilities and functions including basic equipment kits with 2 loops, PCA assembly kits and French/Dutch language kits.
NFS 4 zone conventional control panels are designed to fit all installation needs in conventional fire detection systems, giving priority to ease of use, reliability, and high-performance local, management for up to 25 detectors.
NFS 8 zone conventional control panels are designed to fit all installation needs in conventional fire detection systems, giving priority to ease of use, reliability, and high-performance local, management for up to 25 detectors.
Network 16 system are Digital Loop based systems comprising of master panels (EVCSMPX-16). It is designed to ensure simplicity of future expansion, a maximum of 16 outstations of various types can be controlled from one master panel.
Onyx Series CLSS Gateway Bundle enables us to read the connected device system inventory from one panel or a network of panels and transmitting this data to the Connected Life Safety Services (CLSS) Cloud.
PCA Main Board are suitable for fire alarm computer ES Compact.
Peripheral Cards are required for the essertronic 8007.
Notifier’s plug-in RS485 interfaces are to make SMART3 series gas detectors communicate with SENTOX IDI+ and MULTISCAN++ control panels.
ROME relay option module enclosures are shipped with one ANN-RLY module installed, which provides 10 programmable Form C relays when used with a compatible fire alarm control panel (FACP) using the ANN-Bus communication circuit.
The RP-2001 is a six-zone fire alarm control panel for single and dual hazard deluge and preaction applications.
The RP-2002 is a six-zone fire alarm control panel for single and dual hazard agent releasing applications.
Radio monitoring module for radio transponder IDP-RM1
Danfoss’s remote interfaces are fitted with graphic displays that allows a complete customization of the user interface. All the information is loaded inside the MCX controller. It is powered externally or from the controller.
Room electronics module with integrated room signal lamp, designed with 4 lamp chambers in electricity-saving LED technology.
S3 Series CLSS Gateway Bundle enables us to read the connected device system inventory from one panel or a network of panels and transmitting this data to the Connected Life Safety Services (CLSS) Cloud.
S81-MOD-AN module allows to monitor analogue signals, of 4-20mA type. It is equipped with two extractable terminals, a 5-pole one for the connection of the communication bus and a 8-pole one for the connection to power and transducer.
The SB-ECM Module manages automatic fire extinguishing release system. Controls 8 supervised safety related inputs and 6 supervised safety related outputs.
The SFP-10UD, 10-zone control panel with built-in communicators, provide reliable fire signaling protection for small to medium-sized applications.
Two Zone conventional fire alarm control panel.
Four Zone conventional fire alarm control panel.
The SFP-5UD, 5-zone control panel with built-in communicators, provide reliable fire signaling protection for small to medium-sized applications.
The SMX Fire Alarm Control Panel model by Honeywell is designed keeping in mind the needs of today’s performance conscious establishments.
The STX Fire Alarm Conprol Panel model by honeywell is designed keeping in mind the needs of today’s performance conscious establishments.
Safety Buses have enclosure for up to five (5) modules - Blank door.
The SenTRI ONE system main control boards (MCB) hold all the terminals for the connection of fire alarm loop circuit, master alarms, fire and fault relays, class change, evacuate input and repeat indicator panel.
Sensa Control Units with 1 and 2 channel up to 2Km supplied in a cabinet for wall mounting and are equipped with a 32-relay card and Modbus PLC. It requires 24Vdc power and are also available for 19 '' rack mounting.
The Sigma CP conventional fire alarm control panels are designed for the most demanding of conventional fire detection and alarm system applications. These are easy to install. Configuration options are stored in non-volatile memory.
Signal and Switch modules have features like Operational readiness, Operating mode, Group error, Control of continuous mode ON/OFF.
Single zone indicator unit for up to 64 detector zones status display of “Disconnection, Fault, Fire and Initial (SZI) Alarm Fire
Eltek sprinkler control box with address, Apollo is used to connecting a pressure switch (flow switch) from sprinkler systems for alarm at the fire station when a sprinkler is triggered.
Full active high-quality remote display and operating unit for FlexES FACP. System operation is interoperable and intuitive with a touch-sensitive 7" colored display.
INFO3000 - a well-designed information board developed for both centralized and decentralized display of Notifier fire alarm system alarm messages.
The new generation of fully autonomous Temaline controllers provide increased security, flexibility, performance and are easier to configure.
Input Version is present in mA.
Touchpoint 4 replacement input modules are used for common module in Touchpoint 4 controllers.
Honeywell’s Touchpoint™ plus controllers bring a whole new control experience to your small system of gas detectors. Its modular approach enables you to take control and configure what you need for a wide range of applications.
Touchscreen operating units are cavity wall mount full active high-quality remote displays and operating units for FlexES FACP.
ADKFOU00 are USB interface configuration and cable for ADEMCO panel.
VESDA laser plus vacuum detectors uses laser technology for fire detection for surfaces up to 1600m². They have 4 programmable alarm levels and this alarm levels can be linked to trip delay to avoid false alarm.
The VESDA VLC laser compacts can be configured using a PC with Vconfig PRO and ASPIRE software. These laser compacts have three programmable alarm thresholds such as alarm, pre-alarm and main alarm.
VLI laser chamber assembly suitable for VLI only
Conventional Fire Detection Panels are specially designed for small systems fire detection. The setting is easy and adapted to the specificities of the installers / electricians. The control units are available in 4 versions: 2, 4, 8 and 12 zones.
VISION Park Central CO Panels are designed to become a system extremely easy to set up and use, reliable and safe, to detect and control the CO level.
VISTA-32FBPT commercial partitioned fire and burglary alarm control panel provides the ultimate protection for life and property.
Conventional Control Panels with 4 zones has been conceived and designed for the installation of small and medium-sized fire detection systems in those places where it is necessary to interface with an easy and high-performance central unit.
Conventional Control Panels with 8 zones has been conceived and designed for the installation of small and medium-sized fire detection systems in those places where it is necessary to interface with an easy and high-performance central unit.
Vigilon Compact Plus 1-2 loop Control Panel c/w 1 loop card & supplied in black. Batteries not included - requires 2 x 4015-514-YFR (Powersonic Flame Retardant 12V 12Ah) to meet compliance regulations.
Vigilon fire alarm control panels manages up to six loops accommodating up to 200 devices on each, including repeat panels, interfaces, call points, sensors, sounders and visual alarms.
Vision LT Conventional Central Control Panels are a range of easy to use panels which are compatible with a wide range of end of line resistors and simplifies replacement of obsolete equipment.
Honeywell provides voltage guard modules- DS 1 UV for addressable monitoring centers such as NGBVA, NGBVE, NZBVA and NZBVE.
The Xenex Conventional Fire Detection and Alarm system from Gent provides owners of small building premises with quality protection equipment at an economical price.
The Zircon Series Fire Panels are the controlling component of a fire alarm system and should installation near to a permanent and easy access location for emergency services.
Delta Compact Apollo is a modular, microprocessor based fire control for Apollo detectors designed mainly for use as an independent system. The compact cabinet contains a front panels with power supply, batteries and operating instructions.
Network interface module for max. network participants. Transmission via Token-Passing protocol, similar to DIN 19245-1 (Profibus) loop technology, interruption and short-circuit tolerance.
Start your search with category name, product name, part number, etc.
Copyright © 2023 Honeywell International Inc.