Termination Cards

The Xtralis Head Termination Card with 12 Relays.

12 Relay Head Termination Card (HTC12)

The 12 Relay Remote Termination Card (RCT12) for the VESDA VLS.

12 Relay Remote Termination Card (RCT12)

The 7 Relay Head Termination Card (HTC7) for the Vesda LaserPLUS.

7 Relay Head Termination Card (HTC7)

Remote Termination Card comes with 7 Relay

7 Relay Remote Termination Card

Cable Termination Cards T9003 is Over voltage Protection for F700X It to increase the resistance of the system to over-voltage that might be caused during the connection of devices in some critical applications

Cable Termination Cards

The Xtralis compact termination cards (CTC-RO) are used for VESDA VLC.

Compact (RO) Termination Card

Compact (VN) Termination Card (CTC-VN) for VESDA VLC.

Compact (VN) Termination Card

Delta DA Quad termination sets accessories are used in Delta DA Quad detection and alarm modules. These accessories are comes with 68k ohm end resistors, diodes and fuses.

Delta DA Quad Termination Set

End line termination kit accessories are used for linear heat detection systems.

End Line Termination Kit

Free topology transceiver (FTT)/linked power transceiver (LPT) network termination modules are used with Excel 10™ controllers.

Excel 10™ FTT/LPT Network Termination Module

I/O Terminal Card for fire alarm panel (FACP) 8008.

FACP 8008 I/O Terminal Card

The Eltek’s galvanic separations RS232 are used between Eltek Fire & Safety exchanges. The galvanic isolation secures the equipment against overvoltage. It is supplied with 9 m cable from fire station to the galvanic partition.

Galvanic Separation

Remote Termination Card comes with No Relay

No Relay Remote Termination Card

Accessories and Spare parts for the Sensepoint XCD family

Sensepoint XCD Accessories and Spares

The VESDA Sub Rack can be configured in thousands of different way to configure. Then modules will be assembled in the configuration you specify, from left to right. Position 1 is the far left position, while Position 4 is the far right.

Sub Rack Configuration (VSR)

The cable termination cards T9001-1 are used to connect the field devices in the HS81-HS panel. It is used to increase the resistance of the system to over-voltage that might be caused during the connection of devices in some critical applications.

T900 Cable Termination Block

T9002-1

The Terminal card for LF MCP 761630, with indicators for alarm (red), wire break (yellow) and short circuit (yellow). Suitable for mounting on standard mounting rails.

Terminal Card MCP Long Distance

Terminal Card Power Supply is an accessory for Fire Alarm Panel 8008.

Terminal Card Power Supply

Termination block is used to increase the resistance of the system.

Termination block

VESDAnet™ Remote Relay Modules is a 7 relay version. It consists of 200/100 max no. of devices. It has 1300 m maximum devices between devices.

BUILDING TECHNOLOGIES