058200XL PC boards are for the 5820XL addressable fire alarm control panel.
1 Zone+5 detector kits consist of a VSN-PARK1 one-zone control panel and 5 VSN-CO detectors.
Micro processed 12-zone fire detection control panel incorporates source supply of 2 supervised siren outputs, general alarm relay, general fault relay, general indicators and provides digital input for remote reset,
CPU Cards are required for system / sub-centers or parallel panel control.
Morley IAS’s 2 Zones expansion modules are used for expansion of VSN-PARK1/2 carbon monoxide detection panel. Each module supports a maximum of 32 detectors (16 detectors/zone) and it is provided with 10 status LEDs, 2 level relays and 1 alarm relay.
Kentec’s 4 way plug-in sounder cards simply plug in to any series 3000 conventional main PCB to give 4 additional sounder circuits.
50112426-001 Cable Kit
5208 microprocessor based fire alarm control panels have a built-in UL Listed communicator designed for applications requiring smoke detection, manual pull stations, and sprinkler supervision.
5210UD Replacement Board
6700 addressable fire alarm control panels include connected panel options, enhanced communications, wireless detection and other advanced features. The panels can be configured to achieve an overall point capacity of up to 100 points.
The 6700 is an addressable fire alarm control panel (FACP) that is a direct replacement for the 5700 FACP.
The 198 point addressable fire alarm control panels include connected panel options, enhanced communications, wireless detection, and other advanced features.
The 6820 is an addressable fire alarm control panel (FACP) that is a direct replacement for the 5820XL FACP.
The 1,110 point addressable fire alarm control panels include connected panel options, enhanced communications, wireless detection, and other advanced features.
6820EVS intelligent addressable fire alarm control panels with emergency voice system can connect up to 17 panels with convenient single point communications.
The module range be input module oc output module. K Hyfires wireless in expander module.
SLP retrofit kits for 7100 B-Slim and IF602 panels include a new mounting plate and a new door. The kits require the following accessories: SLP-RB, FLPS-7-RB, SLC95-PM, LCD-SLP, and SLC-PM.
7100 Series fire alarm control panel accessories include a municipal connection option module, a Class A optional module, and a printer transient module.
Panel contains its own integral power supply and battery support for up to eight alarm sounder circuits, two auxiliary relay contacts, a zone disablement facility and a one man test and commission facility, all simplifying system design
ACM-8RF relay control modules provide relay-by-zone capability and contain eight high current (5A) Form C relays.
Adapter Modules are used with a redundant FlexES Control FACP, the redundant remote control of the fire brigade periphery requires an ADP-N3S-EDP.
AFP-100 Series Replacement Board
AM-8000 are RISC high speed microprocessor fire detection control panels which can drive 2 analog loops and it’s expandable to 4 using an additional LIB-8000 card installed inside the panel.
AM-8200 are multi-processor Fire Detection systems suitable for system configurations of a wide range of installations. They are used in many applications, like hotels, offices, hospitals, industrial environments and production facilities.
AM 1000 are addressable microprocessor control panels for the management of fire detection systems. They can control 99 detectors and 99 input/output modules connected on a single loop.
AM2000N Addressable Control Panels are a microprocessor addressable control panel for fire alarm systems management
AM4000 and AM4000G are microprocessor 4 loop control panels for fire and gas detection systems management. The control panels are used in all environments where there is production or presence of fire, toxic or explosive gases.
AM6000N Fire Detection Panels are microprocessor based intelligent fire detection panels compatible with all Notifier addressable loop devices. The base version is equipped with 4 loops and can be expanded up to 16 loops.
ASM-16 addressable switch modules serve as the point of interface between an operator and the system’s audio evacuation, firefighter intercom, and building control circuits.
Addressable fire alarm control panel (FACP) boards have been fully redesigned to meet the needs of today’s fire and life safety systems offering fire safety professionals more capability and convenience.
Ademco CNx Series Expansion Card with 2 analogue loops has capacity of 99 detectors plus 99 modules per loop.
EA4 1B type 4 Alarm Equipment is equipped with a loop allowing the connection of manual call points as well as an output for sound diffusers. (500 mA)
EA4 2B type 4 Alarm Equipment equipped with 2 loops
EA4 4B type 4 Alarm Equipment equipped with 4 loops
The IFP-1000 and IFP-1000HV are intelligent analog/addressable fire alarm control panels (FACPs). The basic IFP-1000 system has one signal line circuit (SLC) loop that supports up to seven 5815XL signal line circuit expanders
Analogue Addressable Controls are fixed build 2 loop analogue addressable control and indicating equipment
Analogue Addressable Control and Indicating Panels are one to six loop analogue addressable control and indicating panel eith Portuguese language variant.
The Analogue Addressable Fire Detections by SMS are Sentri Four analogue addressable fire detection and alarm system from SMS offers medium to large sized building owners the latest in system flexibility and control panel aesthetics.
The ID3000 is a flexible, modular control panel, built from various option modules. Each module is supplied with required mounting screws, connection cables, washers etc. and installation instructions.
Autonomous Satellite Illuminated Alarm Units are available in flash red color.
Esser’s autonomous trigger detectors (DAD) are used to control slave units in any establishment where the measures to be taken with regard to fire safety do not justify the creation of an automatic fire detection installation with a central device.
Notifier's fire protection tables are well-designed tables, developed to simplify the operation of the fire alarm system. It can be used in network facilities, stand-alone facilities. It can silence / restart alarms, reset fire and fault alarm.
BFT3000 is a microprocessor-based fire protection table adapted for the ID3000 and PEARL systems. The control panel is an interface between users (technicians and plant managers) and systems and represents the main point of the fire alarm system
BS7273 Door Release system comprising DRM-1 door release module and M201 single output model prewired and mounted in SMB6-V0 surface mount box.
The BSX 10 Rectifier TR 10 is user-friendly and has an elegant look. It has 2 outputs for door magnets.
BSX 100 centrals are suitable for small businesses, schools, meeting rooms, kindergartens and single-family homes. This centrals are available with 2, 4 or 8 loops and they are easy to install, affordable and reliable.
Basic Equipment Kit has 4, 6 and 8 loop analogue addressable control and indicating equipment.
The Titanus Pro Sens EB can be directly connected to the esserbus / powered loop. The device is supplied with front foil for single-tube operation.
AM-8200-BB is the Blank Box Expansion of the AM-8200 control panel from 6 to 8 Loop Advanced without LCD display. It can be installed directly under the control unit. Equipped with 5.5A power supply.
Carbon Monoxide (CO) detection control panels are designed for applications where concentrations of CO may accumulate and needs to be controlled in order to protect lives. The panel is able to accommodate 1-4 supervised detection zone.
USC750/1 are CPU Boards for AM12-24 fire panel.
CPU card is used for operating the operating system in NGB / NZB systems. It has Battery for memory, Input for MMC card, Programming port, Port for internal printer (back), Rack plug and Plug for display unit.
Notifier CEI 460A are CPU cards for AM4000G
Notifier CEI 800/1 are CPU cards for AM8000
The CPU panel control unit cards used for installation in 8008 or 8010 series fire alarm panel.
CRF-300-6 relay control modules provide intelligent fire alarm systems with six Form C relays.
The carbon monoxide detection and control system consists of Central control, it is called the block composed of the metallic cabin, switching power supply, control module, back panel module, power strip network connection and zone modules.
Central Extinguishing Unit as system status indicator LEDs and a display with two digits of the operating time discharge.
Industry-typical set-up of the new cabinet construction system enables a space-saving design of the FlexES Control FACP for all conceivable applications.
Honeywell Morley Lite are compact, high performance, feature enriched Fire Alarm Control Panel designed to meet the fire detection addressability and are ideally suited for small to medium sized buildings, healthcare, etc.
Notifier’s color touch screens are 4.3" (480x272 pixels) graphic screens for NFSx-Supra. It indicates the operating status of the equipment while allowing access to the history in a simple way.
Comfort Repeater Panels for ECS 80. Provide feedback from the heating system fire detection (SDI) and / or the alarm management unit when integrated into the SDI.
The Compact Industrial Fire Controller provides an integrated industrial protection system that includes flame, gas and smoke detection, suppression and extinguishing capability.
Single loop intelligent fire alarm panels supports VIEW™. They comes with 16 zonal LED's, sounder circuit, 1.5A/3A power supply, space for 12/42Ah batteries and are available in Black/Grey color.
Fire alarm systems Notifier by Honeywell are built on the basis of NFS3030RUS intelligent fire alarm control panels.
Microprocessed conventional control panel with supervised and configurable siren outputs and remote inputs. Allows connection of the optional relay card 020-713.
The Flex GF506D is a six-zone fire alarm control panel FACP that is used for single and dual hazard deluge and pre-action applications.
The Flex 505 is a five zone fire alarm control panel (FACP). The Flex combination control and digital communicator panel provides reliable fire signaling protection for medium sized commercial, industrial and institutional buildings.
The Horizon series of conventional control panels 2 Zone has been developed to provide a simple and reliable solution to the demands of today’s fire detection solutions.
The Horizon series of conventional control panels 4 Zone has been developed to provide a simple and reliable solution to the demands of today’s fire detection solutions.
The Horizon series of conventional control panels 8 Zone has been developed to provide a simple and reliable solution to the demands of today’s fire detection solutions.
AM12-24 are conventional fire detection panels equipped with 12 detection lines that can increased to 24 lines. They are compatible with all Notifier conventional detectors.
DACT-E3 digital alarm communicator transmitters send digital signals over the telephone network that transmits to a central station.
iLumTech DALI PLC Bridge belongs to the Connected Lighting product family. This powerful device is used for connecting two or more DALI networks over mains. It means that it couples DALI communication to the mains and vice versa.
Eltek’s DELTA alarm storage tables are for operation of fire alarm that is alarm stored. It provides opportunity to get in clear text information about where the alarm is triggered and maneuver the alarm storage function.
The Delta Compacts by Eltek are centralized fire detection and alarm control unit that complies with EN54.2 and EN 54.4.
The DX Connexion is an enhancement of the Morley-IAS Dimension panel range. The DX Connexion Panel series also include the modular unit PCB and Base Card.
The Morley-IAS DX Connexion panel is ideally suited for use in the protection of small to medium sized buildings.
Morley-IAS Fire Alarm Control Panel has qualities of reliability, flexibility and value with advanced features and intuitive functionality.
Delta Sub Panels have a decentralized Detection and Alarm Module for Apollo detectors. They are used together with the DELTA OP or as a standalone Detection and Alarm Module in a network. They contains 4/2 loops and eBus for bus communication.
Delta Compact Complete Front available with Fire Alarm Equipment.
Eltek’s Delta compact emergency lighting control panels are complete emergency lighting center. It has automatic logging and monitoring of emergency lights. It simplifies maintenance according to norms and standards for emergency lighting.
The Delta DA emergency lights are separate DA modules for elBus communication intended for Eltek emergency luminaires. These are for use in Delta Compact emergency light control panels. It can be operated in temperature range of -5°C to +50°C.
Eltek’s delta DA quad marine addressable detection and alarm-modules are cost-effective modules for decentralised solutions. It has 2 analogue loop, 3 monitored voltage outputs, 2 voltage-free relay outputs, 1 monitored multi-function output, 1 eBus.
Eltek’s delta DA quad monoloops are used as fire detection and alarm modules for use in buildings.
Delta marine addressable detection and alarm modules are cost-effective detection and alarm modules for decentralised solutions.
The Delta Fire Extinguisher Panels by Honeywell are delivered in 1- or 2-zone versions for release of extinguishing agent. The fire stations have a built-in control panel with eBus for connecting the fire station with other networks.
Eltek’s Delta OP control panels are control units for displaying the status of a Delta emergency lighting system. It is equipped with a graphic display, communication output for direct connection, input for direct PC programming of connected devices.
Eltek’s Delta OP monitoring devices address maintenance of safety and signal lights. The Delta OP has a graphic display, bus adapter for eBus network and port programming for pc.
Delta/ANX 95 conversion kits are used to recessed OP kit in ANX 95 cabinets.
The Notifier door release system is compatible with 12-24V DC door hold systems and includes a volt free contact.
EVS-LOC local operator consoles are a part of a family of external remote consoles that allow for extending the display and control to remote locations within a building.
The conventional ECS 80 Fire Control and Signalling Equipment are designed for small and medium-sized fire detection systems with 4 and 8 loops.
The ES Com range guarantees absolute reliability thanks to its looped Esserbus bus, integrating isolators on each point, thus, fire detection is completely secure in the event of a short-circuit on a cable.
ES-200X fire alarm control panels (FACPs) come with a pre-installed communicator and support up to 198 addressable devices (99 detectors and 99 modules).
50133288-001 hardware kits work with ES-200X fire alarm control panels.
ES-50X addressable fire alarm control panels come with a pre-installed communicator and support up to 50 addressable devices in any combination of detectors or modules.
The ESS-2Plus fire alarm control Panel can support an unlimited number of manual call points and a limited number of detectors by zone according to the limits of design and installation standards that are applicable.
EURONET Control Units are used to interact with alarm systems such as fire, intrusion, gas, access control and TVCC. It’s easy to integrate all the typical functions of the management of the building
Empertech Central Processors provides convenient solution to monitor and control settings and events in complex public address systems space.
An additional 2 Loop Advanced expansion cards. Each LIB-8200 can handle up to 700 logical addresses associated with individual components of the sensors and each module with physical numbering up to159 + 159.
1-loop Fire Alarm Control Panel
Fire Alarm Control Panel for up to 8 conventional fire detection zones
Detector Series ES Detect and conventional devices are compatible with this FACP.
Hardware FlexES Control FX10 basic configuration with software support for 10 loops
The modular FACP FlexES Control concept offers three pre-configured, factory-made expansion units (FX2, FX10, FX18) for operating up to 2, 10 or 18 modules.
THe FACP FlexES Control M is a modular loop technology fire alarm and control panel designed to monitor and alarm small to very large sized premises.
THe FACP IQ8Control C is a loop technology fire alarm and control panel designed to monitor and alarm small to medium sized premises.
THe FACP IQ8Control M is a loop technology fire alarm and control panel designed to monitor and alarm medium to large sized premises.
FLPS-7PCB Power Supply
SMS FP585 Control Panels has its own integral power supply and battery support 2 alarm sounder circuits, 2 auxiliary relay contacts, a zone disablement facility and a one man test, all simplifying system design, installation and commissioning.
The SFP-10UD is a 10-zone control panel with built-in communicators provides reliable fire signaling protection for small to medium-sized applications.
System Sensor Fire Alarm Control Panels are developed to provide a simple and reliable solution to meet the demands of today’s fire detection requirements. It is also been designed to meet the requirements of both installer and end user.
Microprocessor-controlled fire alarm control panel with 4 or 8 detector zones used for connection to automatic conventional detectors (76xxxx) and manual call points of Series 9000 without switch-on control.
The 8008 fire alarm panels meets the highest safety standards for comprehensive fire monitoring. Fire alarm control panels has been designed for large buildings with complex safety needs.
The Flex 402 is a two zone fire alarm control panel (FACP).
The 8000 C fire alarm panel meets the highest safety requirements for comprehensive fire detection. It makes use of proven and trusted technology packaged in a completely innovative modular housing concept.
The Microprocessor-controlled fire alarm panel in accordance with NF EN 54-2, NF EN 54-4, NF S 61-936, and NF S 61-940. Managed evacuation unit (UGA) include with it’s own security power supply in accordance with NF S 61-936 (1999).
Microprocessor-controlled fire brigade display panel acts as an additional display device for a FlexES fire alarm control panel. Serial connection to the fire alarm control panel is via RS485 interface.
Fire Brigade Operating Panel (FBF-Ö), Austrian
Fire Control Panels are used for fire detection and fire alarm system installed in buildings.
Zone card for connecting up to 30 Series 9000 automatic fire detectors and / or up to 10 series 9000 manual call points per zone
Fire Detection Panels are designed for the installation of fire detection systems of small and medium size. They are available in painted steel housing material.
Fire Door Control Unit RZ-24-FA
Morley spare installation Kits are used for the horizon series of fire alarm control panel. Installation kits includes 8 capacitive end of lines, battery leads, Allen key, panel controls key and sounder end of line resistors.
The addressable Fire Safety Control Unit, CMSI 8000 with functions in a box, provides compartmentalization, smoke extraction and people evacuation functions.
NOTIFIER's FireWarden-100X Addressable Fire Alarm System, By Honeywell. The product has a single loop to meet the needs of the smaller systems addressable marketplace.
NOTIFIER's FireWarden-50X Addressable Fire Alarm System, By Honeywell. The product has a 50 point single loop to meet the needs of the smaller systems addressable marketplace.
FireWarden® NFW2-100 addressable fire alarm control panels (FACPs) combine digital alarm communicators/transmitters (DACTs) into one circuit board.
FirstCommand NFC-LOC is an optional Local Operator Console that is compatible with the NFC-50/100(E) Emergency Voice Evacuation Panel for fire protection applications and mass notification.
The Flex 410 is a ten zone fire alarm control panel (FACP) that offers the flexibility to be expanded to twenty or thirty zones using the optional CZM-400 zone expander module(s).
Flex Series GF510 fire alarm control panels provide reliable fire signaling protection for medium-sized commercial, industrial, and institutional buildings.
Flex Series GWF404 4-zone fire alarm control panels provide reliable fire signaling protection for small- to medium-sized retail, office, multi-family, or other similar commercial and institutional buildings.
The Graphic workstation is used to evaluate complex situations and quickly make strategic decisions when monitoring the fire alarm control system.
Four zone conventional fire alarm control panels (FACPs) are compatible with System Sensor® i³™ Series detectors providing advanced features such as drift compensation, maintenance alert, and freeze warning.
The Fuse Kit includes 15 Amp Fuse and 3 Meter PN Cable for batteries larger than 12 Ah.
GWF-7075 fire alarm control panels have a signaling line circuit (SLC) loop that is used to connect addressable detectors.
G-100 control units are microprocessor system, which can manage both toxic and gas detectors explosive with 4-20 mA standard. The control units are available in a wall version and 6 19" Rack container unit with separate power supply.
The VS-SPARE-24 are Replacement Spares Pack for Vigilon Control Panels - VIGPLUS-24 & VIGPLUS-72.
Gent VIGPLUS-24 1 To 4 Loop Control Panel With 1 Loop Card, By Honeywell. The Control Panel Continuously Monitor Devices That Are Connected To Each Device Loop.
Hardware kits are for use with HPF24S6/8 power supplies.
Hardware FlexES control FM basic configurations with software supports for 18 loops. The FlexES Control expansions can however, also be adapted to individual requirements by using separately provided components.
Honeywell Industrial Fire CPU Card is the system's central unit and contains the micro-controller, which processes all the information provided by the other cards of the panel.
Safety Bus Modules allows fire, fire gas detection and firefighting control in a unique bus assuring a high safety level. They are composed by one or two control panel cards and can control eight supervised input for conventional sensors.
Horizon Conventional Fire Alarm Control Panels are a reliable fire alarm detection solution that have been equipped with configurable class change inputs, coincidence detection and programmable delays.
Notifier ID2002 Fire Alarm Panels are fixed 2 loop panels offering a technically sophisticated range of facilities and functions while remaining easy to install, program and operate.
Notifier ID50 replacement PCB kits includes LCD and membrane.
Intelligent Fire Alarm Control Panels are capable of monitoring up to 99 heat, smoke or multi-criteria sensors plus 99 call points. They have Compact control unit with a non-expandable loop and mounted in a metal cabinet.
Notifier ID60 replacement PCB kits includes LCD and membrane.
NOTIFIER ID61 range of single-loop intelligent fire alarm panels are developed for both installers and end users with efficiency in mind, offering a technically advanced range of facilities and functions and are easy to install, program and operate.
ID62 Single Loop Fire Alarm Panels comes with 16 zonal LED’s, sounder circuit, separate 3A power supply, printer option and space for 42Ah batteries and are available in Black/Grey color.
IFP-100 intelligent fire alarm control panels have a single SLC loop and four notification appliance circuits that can be programmed for notification outputs or auxiliary power.
The IFP-2000 is an intelligent analog/addressable fire alarm control panel (FACP). The basic IFP-2000 panel contains one built in signaling line circuit (SLC), which can support 159 IDP sensors and 159 IDP modules or 127 Hochiki devices per loop.
Honeywell's Farenhyt series Analog Addressable Fire Alarm Control Panels are the controlling unit of a fire alarm system with an Emergency Communication System (ECS).
The Honeywell Farenhyt Series Black IFP-75 is an intelligent analog/addressable fire alarm panel with a maximum of 75 points per panel. It is an easy-to-maintain and highly reliable system with low operating costs.
ILI-S-E3 expansion boards provide the E3® Series control panels with two additional electrically isolated signaling line circuits (SLCs).
ILI95-E3 Series mainboards feature a state-of-the-art 32-bit RISC processor and provide a powerful addition to Gamewell-FCI® single pair conductor solutions.
NOTIFIER INSPIRE™ N16x is a cyber security enhanced modular, scalable and software enabled connected Fire Alarm Control Panel (FACP) that can be configured for stand-alone or networked systems for varied Life Safety System applications.
NOTIFIER INSPIRE™ N16e is a cyber security enhanced modular, scalable and software enabled connected Fire Alarm Control Panel (FACP) for varied Life Safety System applications.
Eltek’s DELTA OP control panels are panels developed for both centralized and decentralized operation of Eltek's fire alarm system. It is a microprocessor-based control panel. It represents the important nerve center in the fire alarm installation.
Intelligent System Spare Parts are PCA assembly kit for NF3000 CPU
The Intelligent Fire Alarm Control Panel has modular design makes system planning easier.
The Notifier intelligent Fire Alarm Control Panel is part of the ONYX® Series of Fire Alarm Controls as a stand-alone small-to-large system, or as a large network, the ONYX Series of products meet virtually every application requirement.
The IFP-300 (red) and IFP-300B (black) are intelligent analog/addressable fire alarm control panels (FACP) and are direct replacements for the IFP-100 FACP.
The Intelligent Loop Interface-Main Board with the built-in network and the serial protocols,, results in a building block approach to the fire alarm panel design.
The JNCA-2 is a second-generation Network Control Annunciator for the NOTI•FIRE•NET™ network.
The Notifier KIT E-CAB2 plates are additional plates for peripheral cards which come complete with tear-off tamper for E-CAB2.
LCD Remote Repeat Panel is a remote repeater panel for the AM-8200 control panel, with a 7in the colour touch screen display.
LCD touchscreen monitor by Honeywell It features intelligent gateways to facilitate modular system integration, allowing continued expansion of workstation and network functions.
LIB-8000 by Notifier is an 2 loop optional card to expand the AM-8000.2 and BB-8000.2, with the new Advanced protocol 2 cards maximum for box.
The Linear Heat Series Distributed Temperature Systems creates an exact temperature profile while measuring the temperatures along the optical fiber in minimum measurement cycles of 10-30 seconds and with a minimum spatial resolution of 0.5-8 m.
Loop LED Remote Indicator Panel is for displaying 32 messages but with integrated and wired esserbus transponder 32 LEDs for operation as a remote indicating panel for the esserbus.
MB-Secure 1000 Starter Bundle is a Computer/connection PCB MB-Secure 1000.
MRP-2001 6-zone fire alarm control panels are for single- and dual- hazard deluge and pre-action applications.
MRP-2002 agent release control panels are 6-zone FACPs for single and dual hazard agent releasing applications.
FireLite’s MS-9600LS(E) and MS-9600UDLS(E) are compact, cost effective, intelligent addressable FACPs (Fire Alarm Control Panels) with an extensive list of powerful features.
MS-2 is a two zone conventional fire alarm control panel which provides advanced features such as drift compensation, maintenance alert, and freeze warning.
Two-Zone Conventional Fire Alarm Control Panel
MS-4 4-zone fire alarm control panels (FACPs) bring the latest in microprocessor technology to conventional fire controls.
5012RB replacement boards work with MS-5012 fire alarm control panels.
5024RB and 5024UDRB are replacement motherboards for MS-5024 and MS-5024UD fire alarm control panels.
MS-5UD fire alarm control panels provide reliable fire signaling protection for small- to medium-sized commercial, industrial, and institutional buildings.
MS-9050UD fire alarm control panels (FACPs) are combined with digital alarm communicator/transmitters (DACTs) all on one circuit board.
75267 interface cables are used with MS-9200 fire alarm control panels.
MS-9600 Series Replacement Board
Magicard Rio Pro badging printers and starter kits are available in a simplex and duplex version. They include a printer and five panel dye film for 300 images.
Spare power supply units are used as replacement supply units for mains powered distributed amplifier unit (DAU).
Master control networkable boards are used in SenTRI 2 fire alarm control panels.
Module For CMSI 8000 offers user-friendly operation, and it is efficient and user-friendly setting software.
Morley-IAS DXc Expansion Mimic PCB Includes Silence Sounders, 2 Level Access Key, Allows Geographic ‘Floor Map’ Zonal Indicators To Be Built For Situations Where Increased Clarity Of The Fire Location
Morley-IAS ZXSe Fire Alarm Control Panel is an Intelligent Fire Alarm Control Panel. It has been designed and constructed around proven and reliable microprocessor technology.
Motherboard cards are available with central keyboard RP1R-SUPRA.
Mounting Bezel Kits are of stainless steel and are designed to use with ID2000 and ID3000.
Kentec’s multi-area extinguishant control panels can have any number of detection zones which can contribute to any number of extinguishant outputs as required. All the extinguishant outputs have a dedicated status and control section on the panel.
NF30/50 PCB Assembly Kits are replacement spare kits which includes LCD, fascia membrane, language inserts and installation instructions.
NF3000 Intelligent Fire Panel Kit includes equipment kit with 2 loops, Dutch/ French language kit, power supply unit kit, standard back box kit, main cover kit.
Notifier 002-303 has 2 loop fixed for FACP CAB-B1
NFC- RPU is an Optional Remote Page Unit that is compatible with the NFC-50/100(E) Emergency Voice Evacuation panel for fire protection applications.
The NFS-320 intelligent Fire Alarm Control Panel is part of the ONYX® Series of Fire Alarm Controls from NOTIFIER. In stand-alone or network configurations ONYX Series products meet virtually every application requirement.
NFS-320 Fire Alarm Systems by Notifier are design makes system planning easier & applications, or networked with many devices to protect a large campus or a high-rise office block.
The NFS-320 is intelligent fire alarm control panels are part of NOTIFIER's UL listed ONYX® Series with features that minimize installation time, enable faster response times, and simplify maintenance and usability.
NFS-AUX Auxilary Boards are extinguishing control auxiliary board for NFS3-EXT single area extinguishant control panel
NFS-SUPRA Control Panels are available in 4, 8 and 12 zones for fire detection. They can support up to 32 800-series detectors per zone. The operational performance of the panels are microprocessor-controlled and has several configuration options.
NFS2-3030 is an intelligent Fire Alarm Control Panel (FACP) designed for medium- to large-scale facilities. CPU2-3030ND is one of the main component of this system. It is also known as display of the system.
The NFS2-3030 is an Intelligent Fire Alarm Control Panel (FACP) designed for medium- to large-scale facilities. Fire emergency detection and evacuation are extremely critical to life safety, and the NFS2-3030 is ideally suited for these applications
Central Processing Unit CPU2-640 series are used for NFS2-640 Intelligent Fire Alarm Control Panel. Central Processing Unit is provided with integral 3.0 A power supply.
Conventional fire alarm panels
NFS300 Fire Panel Kits offers technically sophisticated range of facilities and functions including basic equipment kits with 2 loops, PCA assembly kits and French/Dutch language kits.
NFS 4 zone conventional control panels are designed to fit all installation needs in conventional fire detection systems, giving priority to ease of use, reliability, and high-performance local, management for up to 25 detectors.
NFS 8 zone conventional control panels are designed to fit all installation needs in conventional fire detection systems, giving priority to ease of use, reliability, and high-performance local, management for up to 25 detectors.
Nano is a single loop analogue addressable panel with an intuitive user interface and attractive appearance delivering an experience that makes the fire alarm system easy to use and safe to operate.
Network 16 system are Digital Loop based systems comprising of master panels (EVCSMPX-16). It is designed to ensure simplicity of future expansion, a maximum of 16 outstations of various types can be controlled from one master panel.
The Control extinguishing panel by Honeywell is designed to efficiently manage the automatic release sequence of any extinguishing system.
Deluge-Preaction Control Panel includes backbox, power supply, technical manual, and a frame. The RP-2001 is a six-zone FACP for single and dual hazard deluge and preaction applications.
The Agent Release Control Panel RP-2002 is a six-zone FACP for single and dual hazard agent releasing applications. The RP-2002 provides reliable fire detection, signaling and protection for commercial, industrial and institutional buildings.
The Silent Knight Farenhyt PC Board for IFP-50 is intelligent fire alarm control panel.
PCA Main Board are suitable for fire alarm computer ES Compact.
PCB Assemble Kits are NF30 / CAB-A1 replacement PCB assemble kit CAB-A1 replacement PCB kit with LCD and control panel
PCB Cards are used for HMI cable.
Reliable fire detection, signaling, and protection for commercial, industrial, and institutional buildings requiring water-based releasing.
PS Connection Module is required for connecting the 230V AC voltage to the power supply module.
Peripheral Cards are required for the essertronic 8007.
Notifier’s plug-in RS485 interfaces are to make SMART3 series gas detectors communicate with SENTOX IDI+ and MULTISCAN++ control panels.
Eltek’s wireless signal strength testers provide the ability to check the strength of the wireless signal. It is rechargeable. It has operating time of approx. 2 hours. It has LED for indication of selected mode, and signal strength.
Eltek’s wireless network gateway WiFi is the main unit of a wireless mask network. It sends data via WiFi 2.4 GHz. It has fast 868MHz wireless connection. It has 12 channels. It has three LEDs which indicate status and signal strength.
Morley-IAS 124-206 is processor card for analogue addressable control and indicating equipment.
RS485 communication cards is used for connecting the RP1R-RPT repeater or RP1R-PAN-V annunciator up to 1,200 meters away. It has a 24Vdc output to power the repeater or isolator.
Notifier Rack Mounting Assemblies are 6 U 19in adapter plates and covers used for standard chassis, printers and 256 zone display modules.
Heavy-duty drawer on ball-bearing metal rails for rack mounting cabinet incl. Base Module Carrier and Controller Module. Expandable for up to four Expansion Module Carriers.
Rack mounting Heavy Duty Drawer with PSU
Radio monitoring module for radio transponder IDP-RM1
Danfoss’s remote interfaces are fitted with graphic displays that allows a complete customization of the user interface. All the information is loaded inside the MCX controller. It is powered externally or from the controller.
ECC-RTZM remote telephone zone modules allow for secure access to the ECC-50/100(E) emergency command center via cell phone or a remote telephone means.
Replacement Main Control Board (MCB) is a spare replacement part for the Nano panel.
Replacement PCB are spare parts available in 2,4,8 zone for NFS2,NFS4 and NFS8 respectively.
Rev 3 intelligent addressable fire alarm control panels (FACPs) are combined with digital alarm communicator/transmitters (DACTs) all on one circuit board. They have an extensive list of powerful features.
S3 Series fire alarm control panels provide the latest, innovative high-end processing power.
S81-MOD-AN module allows to monitor analogue signals, of 4-20mA type. It is equipped with two extractable terminals, a 5-pole one for the connection of the communication bus and a 8-pole one for the connection to power and transducer.
SAFE is a fully engineered solution for your building to allow you to bridge the gap between BS5839 Part 1 and BS5839 Part 6 without the risk of generating multiple false evacuations.
The SB-ECM Module manages automatic fire extinguishing release system. Controls 8 supervised safety related inputs and 6 supervised safety related outputs.
The Safety Bus system allows the Fire and Fire & Gas detection and the firefighting control in a unique bus assuring a high safety level.
The SB-CM Safety Bus systems allows the fire detection and the firefighting control in a unique bus assuring a high safety level. SB-SCM module can control eight 500mA outputs for controlling solenoid valves with safety-related functions.
Notifier SFP-2402 and SFP-2402E Fire Alarm Control Panels (FACPs) bring the latest in microprocessor technology to conventional fire controls.
Notifier Fire Alarm Control Panel by Honeywell brings a range of fire alarm control panel with latest microprocessor technology to conventional fire controls.
Five zone fire alarm control panels provide reliable fire signaling protection for small to medium-sized commercial, industrial, and institutional buildings.
SK-4 Series Replacement Board
SK-5217 zone expanders provide 10 additional Class B (Style B) zones.
SLC-2 expander modules enable a second signaling line circuit (SLC) loop for Fire-Lite® MS-9600 fire alarm control panels (FACPs).
The SMX Fire Alarm Control Panel model by Honeywell is designed keeping in mind the needs of today’s performance conscious establishments.
The STX Fire Alarm Conprol Panel model by honeywell is designed keeping in mind the needs of today’s performance conscious establishments.
Safety Buses have enclosure for up to five (5) modules - Blank door.
The Safety Bus system allows the fire detection and the firefighting control in a unique bus assuring a high safety level.
Scorpion Control Unit Panels are a unique, functional remote testing system for aspirating smoke detectors. Aspirating smoke detectors are traditionally tested after commissioning by introducing test smoke at the individual aspiration vents.
The SenTRI ONE system main control boards (MCB) hold all the terminals for the connection of fire alarm loop circuit, master alarms, fire and fault relays, class change, evacuate input and repeat indicator panel.
Flush surround for SenTRI one control panel.
Sensa Control Units with 1 and 2 channel up to 2Km supplied in a cabinet for wall mounting and are equipped with a 32-relay card and Modbus PLC. It requires 24Vdc power and are also available for 19 '' rack mounting.
The SenTRI 2 control panel continuously monitor the devices that are connected to its analogue loop circuits.
SenTRI ONE has been designed with ease of use as a high priority. It is a single loop analogue addressable panel with an intuitive user interface and attractive appearance.
SenTRI FOUR analogue addressable fire detection and alarm system offers medium to large sized building owners the latest in system flexibility and control panel aesthetics. Panel manages up to 4 loops each accommodating to 200 devices on each loop.
Serial RS 232/485 Optional Card is serial output interface board with CEI ABI protocol (MODBUS at request).
The Sigma CP conventional fire alarm control panels are designed for the most demanding of conventional fire detection and alarm system applications. These are easy to install. Configuration options are stored in non-volatile memory.
Signal and Switch modules have features like Operational readiness, Operating mode, Group error, Control of continuous mode ON/OFF.
NFS3 EXT Single Area Extinguishant Control Panel offers outstanding value and performance for all small to medium fixed fire fighting installations with three detection zones as standard.
The IdentiFlex 100 is a 25 point, single loop, addressable fire alarm control panel that supports Gamewell-FCI, Velociti Series detectors and modules.
Single zone indicator unit for up to 64 detector zones status display of “Disconnection, Fault, Fire and Initial (SZI) Alarm Fire
Smoke extraction for 3rd family B and 4th family residential buildings, residential homes. It can manage natural smoke extraction, non-stopping of the elevators to the damaged floor, evacuation control for home accommodation.
The SCS-8 Smoke Control Station, SCS-8L Smoke Control Lamp Driver are used with the NOTIFIER AM2020/AFP1010, NFS-640, NFS-3030, NFS2- 3030 Fire Alarm Control Panels
The Smoke and Heat Exhaust Systems by Notifier are compact control unit for smoke and heat exhaust systems. The system contains an emergency power supply and terminals allowing the connection of the various accessories.
Spare Parts are spare CPU module for pearl panel
Eltek sprinkler control box with address, Apollo is used to connecting a pressure switch (flow switch) from sprinkler systems for alarm at the fire station when a sprinkler is triggered.
Full active high-quality remote display and operating unit for FlexES FACP. System operation is interoperable and intuitive with a touch-sensitive 7" colored display.
INFO3000 - a well-designed information board developed for both centralized and decentralized display of Notifier fire alarm system alarm messages.
Switch Monitor Plus Addressing Units are used for all purposes where on/off units are to be connected to the system and units do not supply operating voltage to the detectors
The new generation of fully autonomous Temaline controllers provide increased security, flexibility, performance and are easier to configure.
Touch screen operator terminals have 7inch wide and TFT technology based display with ARM processor.
Input Version is present in mA.
Touchpoint 4 replacement input modules are used for common module in Touchpoint 4 controllers.
Honeywell’s Touchpoint™ plus controllers bring a whole new control experience to your small system of gas detectors. Its modular approach enables you to take control and configure what you need for a wide range of applications.
Touchscreen operating units are cavity wall mount full active high-quality remote displays and operating units for FlexES FACP.
The two zone conventional fire alarm control panels (FACPs) provide reliable fire signaling protection for small- to medium-sized commercial, industrial, and institutional buildings.
ADKFOU00 are USB interface configuration and cable for ADEMCO panel.
VESDA laser plus vacuum detectors uses laser technology for fire detection for surfaces up to 1600m². They have 4 programmable alarm levels and this alarm levels can be linked to trip delay to avoid false alarm.
The VESDA VLC laser compacts can be configured using a PC with Vconfig PRO and ASPIRE software. These laser compacts have three programmable alarm thresholds such as alarm, pre-alarm and main alarm.
Conventional Fire Detection Panels are specially designed for small systems fire detection. The setting is easy and adapted to the specificities of the installers / electricians. The control units are available in 4 versions: 2, 4, 8 and 12 zones.
VISION Park Central CO Panels are designed to become a system extremely easy to set up and use, reliable and safe, to detect and control the CO level.
VISTA-32FBPT commercial partitioned fire and burglary alarm control panel provides the ultimate protection for life and property.
Conventional Control Panels with 4 zones has been conceived and designed for the installation of small and medium-sized fire detection systems in those places where it is necessary to interface with an easy and high-performance central unit.
Conventional Control Panels with 8 zones has been conceived and designed for the installation of small and medium-sized fire detection systems in those places where it is necessary to interface with an easy and high-performance central unit.
The replacement Master Repeat Cards are designed for installations into new Repeat panel or A3 Mimic panel that are wired on to a loop of an analogue and addressable fire detection and alarm systems.
Notifier Vds I/O Modules are used for Pearl single loop analogue addressable control and indicating equipment.
Vigilion Plus Control Panel accomodates and controls up to 200 devices including advanced fire sensors, interfaces, call points, alarm sounders and visual alarms. They are 1 to 4 loop control panel with or without a printer.
Vigilon Plus Control Panels are accommodating up to 200 devices including advanced fire sensors, interfaces, call points, alarm sounders and visual alarms. The Compact Plus 2 loop panels are available with integrated 24 hour standby capacity.
Vigilon Plus Control Panels are available with integrated 24 hour standby. Advanced networking options allow networking of up to 200 panels in a multi-domain structure with options of copper or optic fibre connections
Flush Surrounds provides full display and control of the system & Connecting to the detection loop, the repeat panel provides a cost effective solution with minimum requirements for cabling and installation.
Vigilon fire alarm control panels manages up to six loops accommodating up to 200 devices on each, including repeat panels, interfaces, call points, sensors, sounders and visual alarms.
Vision LT Conventional Central Control Panels are a range of easy to use panels which are compatible with a wide range of end of line resistors and simplifies replacement of obsolete equipment.
Honeywell provides voltage guard modules- DS 1 UV for addressable monitoring centers such as NGBVA, NGBVE, NZBVA and NZBVE.
Wireless Control Panel for Self-Monitoring.
Wireless Measurement Kit allows the user to determinate the quality of the radio signal between the wireless device and the transistor / expander modules.
The XLS80e control panels by Honeywell are available in 2 through to 8 loop versions, is one of a few in the market place that will comply with the standards and yet provide control of over 512 devices.
The Xenex Conventional Fire Detection and Alarm system from Gent provides owners of small building premises with quality protection equipment at an economical price.
Xenex 8 Zone repeat indicator, less batteries
Gent XENS-MCB-2, XENS-MCB-4 and XENS-MCB-8 are spare / replacement PCB assembly for use with the Gent Xenex 2, 4 and 8 Zone Fire Alarm Control Panel respectively.
The ZXSe range of intelligent fire alarm control panels has been designed to assist with the normal operation of a fire detection system.
The Zircon Series Fire Panels are the controlling component of a fire alarm system and should installation near to a permanent and easy access location for emergency services.
Delta Compact Apollo is a modular, microprocessor based fire control for Apollo detectors designed mainly for use as an independent system. The compact cabinet contains a front panels with power supply, batteries and operating instructions.
Network interface module for max. network participants. Transmission via Token-Passing protocol, similar to DIN 19245-1 (Profibus) loop technology, interruption and short-circuit tolerance.
Start your search with category name, product name, part number, etc.
Copyright © 2022 Honeywell International Inc.