You are browsing product catalog for
Class A converter it converts all speaker circuits from Class B (Style Y) to Class A (Style Z).
The Connection Terminal is used for external power supply of the periphery over screw-type terminals.
DIM-485 display interface modules convert EIA-232 to EIA-485 and are for use with Fire-Lite® LCD-40 Series annunciators.
DIO 235580.003 is used where one wants to connect sensors / detectors with 4-20mA signal to the fire alarm system. It can be used among other things used as an interface to a gas detector.
Communication interface for voice notification, text message SMS, alarm transmissions etc. The device has a built-in eBus and is used directly against an eBus bed. The unit must have an external 24V supply.
The communication module ID-CRA is connected to the analogue Notifier ID3000, ID2000 and ID50 to maintain security of the fire control and detection system by sending any event to a central station which is monitored permanently
EIB Interface for building automation via an EIB-system. The EIB-Interface is used for bidirectional conversion of log data from the panel interface to EIB.
Essernet Micromodules are a network interface module such as essernet module, however it is used for max. 31 network participants.
Q7751A Excel 10™ routers double the bus length and the number of usable nodes on a LonWorks® (previously called E-Bus) networks.
Expansion Modules are plastic mounting tray for up to four modules & They connection to the relocated shouldered plug-in terminal is made over a preconfigured plug-in cable.
Farenhyt IDP-Zone-6 is an addressable zone interface module for use with Silent Knight IFP-series fire alarm control panels (FACPs).
Honeywell's farenhyt two wire interface modules have been designed for use with Silent Knight IFP-series fire alarm control panels (FACPs).
Fibre Optic Converter for Essernet devices for C-rail mounting & Its Depending on the glass fibre used, distances of up to 3km are possible. Suitable for 50/125μm and 62.5/125μm multi-mode fibres.
Field Bus Interface Plus is used for interfacing for the programming of the FACP 8007, 8000 C/M, 8008, gateway, ABIGA and Extinguishing Control Panels 8010 or for the direct field-side connection of a single installed loop.
The Fire and Smoke Detector Interface module is used with conventional fire and smoke detectors located in hazardous areas.
Profibus DP slave modules are used for connection of PCD2 modules. These modules have galvanically isolated RS-485 port.
The interface can be used to interface transmitter, to drive I/P converter, fire and smoke detectors or similar switched resistor systems, located in Hazardous Area, requiring a wide output current range to operate properly.
The Delta system with SMS kits are designed to easily transfer messages in 3 optional levels from control panels. Operation of the fire station can be done via text messages to the modem. It allows for sending messages for up to 25 mobile phones.
Eltek LON Bus Interface for NGBVA, NGBVE, NZBVA and NZBVE emergency lighting systems.
LRS 300 PC Interface used as an alternative to the programming unit. All components on the VESDAnet™ can be programmed via the interface.
Loop Isolator Module LIM
The Loop Powered Current Repeater is dual channel current repeater. It can be used to interface transmitter, I/P converter or fire-smoke detectors to provide input-output isolation.
Main Back Plane is designed exclusively for FlexES Control.
The Modbus Protocol Serial Communications Card address and parameter configuration through two 8-selector dip switches. It provides two independent output ports: one RS485 (Half Duplex) and one RS232.
The PCD7 LonWorks® interface modules are used for connection to the LonWorks® networks. These modules have additional RS-485 serial interface.
Profibus DP slave modules are used for connection of PCD1, PCD2, and PCD6.M300 modules.
The RS 232 Host Interfaces By Honeywell are asynchronic RS 232 host interface that serves as a direct connection device between controllers, terminals as well as control units and RS 232 PC interface.
The Safety Bus system allows the Fire and Fire & Gas detection and the firefighting control in a unique bus assuring a high safety level.
The Remote Telephone Zone Module that allows for secure access to the NFC-50/100(E) Notifier First Command Center via cell phone or a remote telephone means.
S4 Interface Modules 4-Input / Output Interface Module are designed for use with Vigilon and 34000 fire alarm control panel
SEI Serial Essernet Interfaces EDP can be used as a gateway to link remote computers that support the ESSER data protocol (EDP) & The EDP version (unidirectional) is only provided with information from the essernet, remote control is not possible.
SK-NIC network interface cards work with fire alarm control panels (FACPs), allowing FACPs to connect to one another through broadband networks.
Esser Serial 8-Way Interface has a current rating of 20mA and 13mA each active output.
The N-ANN-S/PG Interface module connects either a serial or parallel printer with a compatible Fire Alarm Control Panel (FACP) to print real-time logs of system events, detector status reports, and event histories.
Honeywell Notifier’s Signaling Line Circuit-Integration Module provides a communication link between a VESDAnet network and a Fire Alarm Control Panel SLC loop via the High Level Interface VHX-1420-HFS.
Smile Connect Gateway is used to control the Honeywell Smile SDC controller via an App on mobile. With this App you can manage the time programs and easily change the operating mode of the heating regulator using quick actions.
Universal Interface Module UIM
The Universal Zone Coder provides up to 256 different coded outputs. The UZC-256 requires programming software and a hardware PC interface.
Universal adapter for NOTIFIER fire alarm panels
Xtralis VESDA High Level Interface is required for connection to the Vesdanet Network.
A VESDA High Level Interface (HLI) enables connection between a VESDAnet and configuration and monitoring platforms.
VESDA Modbus HLI Wall Mount is housed in a metal enclosure allowing for permanent mounting on a flat surface.
VESDA Open Protocol HLI Master Slave model, the host supervises the communications link between itself and the HLI (slave) by regularly polling the HLI to determine whether there has been a change in the status of a detector on VESDAnet.
The VESDA Sliding Windows High Level Interface (HLI) links your VESDAnet* with PC software monitoring and configuring tools such as Xtralis VSM4 and Xtralis VSC.
VESDA® VHX-0200 Sliding Windows high level interface (HLI) models enable connections between a VESDAnet™ (a communications protocol that allows devices to communicate on one network) and configuration/monitoring platforms.
VESDA Wall-Mounted Modbus High Level Interface (HLI) links your VESDAnet1 with PC software monitoring tools, Building Management Systems (BMSs) or Fire Alarm Control Panels (FACPs).
The VESDAnet Interface Card (VN Card) is a simple interface card for the range of VESDA VLF by Xtralis aspirating smoke detectors.
Xtralis VESDAnet Socket is a VSR spare module for VESDA sub rack.
VESDA® Modbus type 3 HLIs act as a proxy for all VESDA devices on the VESDAnet™ network, providing access to rich status information available from VESDA detectors, as well as the ability to control and configure these devices.
Honeywell provides VHX series high level interfaces which links your vesdanet1 with pc software monitoring tools, building management systems and fire alarm control panels.
The VESDA VLI by Xtralis is an industry first early warning aspirating smoke detection (ASD) system, designed to protect industrial applications and harsh environments of up to 2000 m2 (21,520 sq. ft.)
The VFT-15 VESDAnet Interface Card (VN Card) is a simple Interface for the VESDA VFT-15 detector.
Wiegand Interface Boards are required for ISO magnetic stripe reader, buzzer and memory for degraded operation. They have Integrated MGP-I means 1 low power relay of 2A and 1 double balanced input.
ZI DUAL Channel Interface Units have been designed provide pre-alarm and alarm or separate area protection.
Start your search with category name, product name, part number, etc.
Copyright © 2023 Honeywell International Inc.