You are browsing product catalog for
058950XL PC boards are for use with Silent Knight® 5895XL intelligent power modules.
Peripheral Modules are only be used on system terminal 1 of the control panel interface board.
The Contact Interface Module is used as an interface of VARIODYN D1 system for the connection of 8 control contacts.
Extension Modules are for 4 modules & These connection is made by a prefabricated connection cable.
The 4 Module Slots Connection Terminal shouldered 2 m connection terminal for wiring connection of esserbus/esserbus-PLus (up to 4 modules) to expansion module carrier.
Honeywell Security's Installation Module has a 4G and GPS function for CamDisc E and CamDisc + E.
The Serial Essernet Interface is a router with internal RS 485 interface for interfacing an 8000 fire alarm panel over relatively large distances e.g. subnetworks.
A083 Galaxy Ethernet Modules provides alarm signaling and remote servicing support for Galaxy systems via 10 Base T Ethernet LAN/WAN supporting TCP/IP protocol.
A101 G2 Accessories are 4 way relay and interface kit
Adapter board for installation into the FAS provides the redundant port for the FAT 4000, ZPA4000, GMT4000 or FBF4000uC starting from the serial interface of the FACP FlexES Control.
ATI-1000R Telephone location interface for broadcasting audio through internal PABX or analog line. It performs the function of live call and forwarding of up to 6 pre-recorded messages.
Ackermann Clino Serial Interface for ESPA 4.4.4 only in connection with the clino opt 99 zone controller.
Adapter Modules ADP-4000 are for connecting the ERA webserver FX808080 to a FACP FlexES Control.
Adapter XP95 Ex / Apollo is Used to connect intrinsically safe XP95Ex detectors to an addressable loop.
B564 are general-purpose interface module devices developed to communicate and function with Honeywell’s INNCOM system-5 devices, protocols, and applications. They can be programmed as an interface module or as a controller.
The BACnet Gateway provides an interface between NOTIFIER’s fire panel network and a network using the BACnet/IP communication protocol.
Basic Module IQ8Control
Honeywell's Box Interface module is used for activating and processing acknowledgement signals from master boxes.
CELL-MOD cellular fire alarm communicators provide cellular communication as an alternate method of central station reporting. These models house the GSM communicator in a plastic enclosure and has an option for an external antenna.
Cable Connection Terminal is 2m cable for the essernet modules with 62.5 kBd or 500 kBd transfer rate.
Cable connection terminal for essernet modules
KMSIMP is a Card 2 Remote Control Outputs with current emission.
MI-UHF CARD COMBI BADGE and UHF passive card - MIFARE 13.56 MHz neutral white compatible with N-PASS and Euronet system on Mifare terminals. Dimensions: 85x54x0.95 - (Minimum 25 pieces).
Cellular Fire Alarm Communicators provide cellular communication as an alternate method of central station reporting. These models include a GSM communicator within a metal cabinet enclosure with lock/key, and includes an external antenna.
Cisco Catalyst 3850 Series Switches provides capabilities that ideally suited to support the convergence of wired and wireless access.
Class A converter it converts all speaker circuits from Class B (Style Y) to Class A (Style Z).
Communications kits for connection of external devices through the essernet network. Composed of box, RS232 serial communication interface, 232 / v24 converter module board, EDP communication serial interface board module.
The Connection Terminal is used for external power supply of the periphery over screw-type terminals.
Connection terminal for UBext
D1 PAMMI Plus Redundant Selector Switch
DIM-485 display interface modules convert EIA-232 to EIA-485 and are for use with Fire-Lite® LCD-40 Series annunciators.
DIO 235580.003 is used where one wants to connect sensors / detectors with 4-20mA signal to the fire alarm system. It can be used among other things used as an interface to a gas detector.
DXc Network card are fitted to each panel in order to create a network and to connect panels together.
DXc 2 loop base card - Morley Protocol
Communication interface for voice notification, text message SMS, alarm transmissions etc. The device has a built-in eBus and is used directly against an eBus bed. The unit must have an external 24V supply.
Eltek Delta Communication Interface text message via SMS, alarm transmission, etc. The device has a built-in eBus and is used directly for an eBus network.
The communication module ID-CRA is connected to the analogue Notifier ID3000, ID2000 and ID50 to maintain security of the fire control and detection system by sending any event to a central station which is monitored permanently
E080 Galaxy Ethernet Module provides alarm signalling and remote servicing support for Galaxy systems via 10 Base T Ethernet LAN/WAN supporting TCP/IP protocol.
E3 Focal Point Kit including SLP-BLK, RPT-E3- UTP, SLC-PM and FPT-GATE-3. Used to connect a network of E3/S3 panels to the Focal Point Workstation.
EBus Card Cards that can be placed in OP or DA to use the eBus function.
EIB Interface for building automation via an EIB-system. The EIB-Interface is used for bidirectional conversion of log data from the panel interface to EIB.
Electronics for ESSER gas detector for interfacing on one/two/three inputs of the esserbus alarm transponder 808623.
Echelon Interface is used to connect an AM2000-6000 control panel in any point of the network, it has no line module to allow the best fitting to plant's needs. FTT10A, 485 galvanic insulated and 485 polarized modules are available.
Notifier Echelon Line Module to connect the E-NET cpu to line devices, using 1300nm-9/125micron single mode optical fibre, up to a distance of 15Km.
Notifier Echelon Network Interface Card with RS232 serial line for the integration of Honeywell Galaxy anti-intrusion control panels.
EnOcean KNX Gateway is an Interface between sensors/transmitters with EnOcean Technology and KNX bus coupling units. KNX Gateway has 32 channels which can be allocated individually.
Enterprise Internet Communicators by Honeywell provides a private network solution using LAN connections combined with the capability to communicate via the internet.
Esser’s Espa interface type is included in the Essernet. Espa is a protocol used for communicating with a person search installation.
Notifier Ethernet Device with 8 I/O analog/digital, connection with the panel via Ethernet, it is possible connect 3 INX-S by RS485 and Notifier device by RS232.
SIB600W is an Ethernet Interface Card for the new AM Series control panel. Notifier analogue control panels endowed with the Ethernet card SIB600W can be connected to the LAN and use the powerful supervision software NOTINET3000ETH.
Notifier Ethernet Network Interface Cards for E-net central integration and 4View series DVR.
Ethernet Surge Protector - UL Fire
Q7751A Excel 10™ routers double the bus length and the number of usable nodes on a LonWorks® (previously called E-Bus) networks.
Expansion Modules are plastic mounting tray for up to four modules & They connection to the relocated shouldered plug-in terminal is made over a preconfigured plug-in cable.
Farenhyt IDP-Zone-6 is an addressable zone interface module for use with Silent Knight IFP-series fire alarm control panels (FACPs).
Honeywell's farenhyt two wire interface modules have been designed for use with Silent Knight IFP-series fire alarm control panels (FACPs).
Fast Ethernet VDSL over Coax Network Extender used in pairs, they offer up to 100 Mbps of data transfer over a 50 or 75 Ohm coax cable via a BNC connector. It is a perfect fit for the IP surveillance market.
Fiber Tranciver for 20Km (Sfp-100Sm)
Single Mode Fibre Card by Honeywell allows a fast and more reliable network over distances of up to 20km between Vigilon Plus Panels.
Fibre Optic Converter for Essernet devices for C-rail mounting & Its Depending on the glass fibre used, distances of up to 3km are possible. Suitable for 50/125μm and 62.5/125μm multi-mode fibres.
The Fire and Smoke Detector Interface module is used with conventional fire and smoke detectors located in hazardous areas.
The advanced Allied Telesis WebSmart switches combine the simplicity of unmanaged switches with the performance and reliability of managed switches. GS950 Series switches at the network edge are the ideal cost-effective solution for small businesses.
GSM Adapters by Honeywell are adapter for ISDN reception module used for an RFW-2000 in connection with an ISDN reception module of the alarm receiver DEZ 9000.
The Honeywell Communication module for Dominal Panel is designed with GSM/GPRS and Ethernet is that can be used to equip sites with no telephone line .
Galaxy Ethernet Module provides alarm signalling and remote servicing support for Galaxy systems via 10 Base T Ethernet LAN/WAN supporting TCP/IP protocol.
Galvanic Isolator is a zone-powered, two-channel interface for use in conventional fire detection systems for protection within hazardous areas.
Profibus DP slave modules are used for connection of PCD2 modules. These modules have galvanically isolated RS-485 port.
Gamewell Intelligent Network Interface Module is INI-7100-UTP model has an unshielded, twisted pair assembly.
The interface can be used to interface transmitter, to drive I/P converter, fire and smoke detectors or similar switched resistor systems, located in Hazardous Area, requiring a wide output current range to operate properly.
Gent Connection PCB for FAAST Interface (FAAST LT)
The Allied Telesis SP Series Gigabit Small Form-Factor Pluggable Module delivers flexible, full-duplex Ethernet connectivity. These hot-swappable fiber and copper interfaces simply plug into the SFP slot on all SFP-compatible devices.
Silent Knight Graphic Monitoring System Software used to monitor up to 16 IFP-Series control panels (nodes) with accessories.
TGP-ID3000 Graphics Software License for ID3000 Control Panel. Extension for TG-ID3000 graphic software, with version 7 or higher, to manage one more ID3000 control panel. One license per exchange is required.
High-Speed Network Communication Modules provides high speed data communications.
The GSM/GPRS module can be used to equip sites with no telephone line (e.g., a second home) and allows remote monitoring to be set on partially or fully unbundled sites with no Internet connection available for the alarm system.
The IFP-2000 network repeater modules are used when panels to be networked are located further than 20 feet apart or when panels are located in multiple buildings.
IGIS Loop card is used to network the CMSI8000 (32 CMSI max.). The distance between 2 users is maximum 1200 m.
IGSMCFP4G commercial fire communications radios offer contact ID reporting with select VISTA® control panels.
IPOTS-COM digital communicators transmit system status (alarms, troubles, AC loss, etc.) to a central station via the public switched telephone network and/or internet protocol.
The micro modules are designed for IQ8Control C/Intelligent Addressable Fire Alarm Control Panel.
IQ8Wireless universal interface w/o cover
The Indicating Circuit Modules/Notification Appliance Circuit Modules provides four Style Y (Class B) or Style Z (Class A) supervised audible-visual alarm notification circuits, and may be expanded to eight circuits.
The Industrial Managed POE Switch is a high performance and cost effective switch that meet the high reliability requirements of industrial network operations.
Interface card for TARGA512 camera integration, LON connection to the E-net cpu, RS232 connection to the camera. N ° 1 entrance and N ° 1 exit on board.
8 Zone Interface Card is used for Manual Call Points in CMSI type B
Eltek Interface Modules for LOGICA-Visual is a USB 2.0 or RS485 interface module used for the interface between central battery system (or group) and a PC.
The Delta system with SMS kits are designed to easily transfer messages in 3 optional levels from control panels. Operation of the fire station can be done via text messages to the modem. It allows for sending messages for up to 25 mobile phones.
LAN-Surge Protections are for essernet 500 kBd.
Eltek LON Bus Interface for NGBVA, NGBVE, NZBVA and NZBVE emergency lighting systems.
LRS 300 PC Interface used as an alternative to the programming unit. All components on the VESDAnet™ can be programmed via the interface.
Loop Card TC800/XLS60
The Loop Powered Current Repeater is dual channel current repeater. It can be used to interface transmitter, I/P converter or fire-smoke detectors to provide input-output isolation.
The PW Series are RS232/M-Bus converters which act as master interfaces for M-Bus networks with 3/20/60 slaves
Main Back Plane is designed exclusively for FlexES Control.
The Mains powered interface units are EN54-4 compliant battery backed power supplies that can be directly connected to the Vigilon and Nano loop and also have highly flexible interfacing capability.
Master Box Interface Module is used for activating and processing acknowledgement signals from master boxes. It is programmable as constant or pulsed master box activation.
The Media Interface Board mounts “piggyback” onto the SIB-NET module. Provides full signal regeneration and amplification. For use with NOTI-FIRE-NET Networks.
The Modbus Protocol Serial Communications Card address and parameter configuration through two 8-selector dip switches. It provides two independent output ports: one RS485 (Half Duplex) and one RS232.
The Module with preset interface M4-TTY and 3.3VDC with 20Ma.
Multiprotocol Gateway DP7500
N4387B-060 are integrated Modbus which are mounted internally in the DTS unit and uses TCP/IP interface.
The Gateway is an intelligent gateway interface for the ONYX Works fire monitoring workstation. This gateway facilitates complete monitoring and control of a network. In addition, it supports full panel programming and network diagnostics.
NPB-8000 expansion modules and kits are for WEB-8000 controllers.
NStar Ethernet Adapters by Honeywell are optional plug-in ethernet interface for the NStar access control system, that mounts directly on the NS2+ and requires no external devices or wiring.
The Notifier NAM-232 Network Adapter Module functions as an interface between the AFP-200, AFP-300, and AFP-400 Fire Alarm Control Panels and the NOTI•FIRE•NET™. The network supports communications over a twisted-pair wire or fiber-optic medium.
Network card essernet modules for FlexES control are used for up to 16 and 31 network devices. Modules are designed with plastic protective housing with LED displays for speedy indication of the operating status.
The network and communication modems can communicate to a main system, (eBus) between each other, or from a modem to its next etc.
Spare master control board for SenTRI 4 control panel
Notifier Pearl Smart Watch Kit. Provides an IP interface from your panel to your AMX graphics package.
OVP Module for ISDN Telephone Lines has additional screw terminal connection on the protected output enables a double wiring of the S0 bus (distribution function).
Optical Cards For G-100 / G-100R serial interface card for connecting the G-100 / G-100R control units with an external printer.
Optional cards ethernet boards are designed to connect the E-Net CPU on the ethernet network. Ethernet boards connects one or more PCs on a local or geographic network or create a CPU network on ethernet.
Overvoltage protection modules
PC interface lead accessories are used for programming all Morley-IAS control panels.
Modules with freely programmable interfaces. Modules with interfaces for specific protocols. Numerous protocols supported.
The PCD7 CAN bus attachment modules provides a galvanic isolated high-speed CAN interface with up to 1 Mbps. The CAN bus should be connected directly to this attachment modules.
PCD7.F communication modules can be optionally fitted to the Saia PCD3.F or Saia PCD2.F communication modules. The modules can also be used in the Saia PCD1/2 itself in slot A or C.
The PCD7 LonWorks® interface modules are used for connection to the LonWorks® networks. These modules have additional RS-485 serial interface.
The Allied Telesis AT-6102G PoE midspan splitter converts non-PoE devices to using Power over Ethernet.
The PW Series are RS232/M-Bus converters which act as master interfaces for M-Bus networks with 3/20/60 slaves. They also have a ZVEI port for optical isolation.
RS232/M-Bus Converters act as master interfaces for M-Bus networks with 20 slaves. They also have a ZVEI port for optical isolation. They are of a compact design.
Pearl Communication Card Provides third party protocol (RS232 & RS485 ports) for PEARL panels.
Notifier PRL-P2P ID²net network card for pearl panel network.
A maximum of four modules without a potential separated RS-485 interface of their own can be connected to the module.
The switch provides wall-mount, rack-mount and desktop options giving users their choice of deployment locations. Designed to minimize power consumption through use of high efficiency power supply and low power chipset.
The PCD7 Profibus master modules can operate as a mono-master or multi-master system and they optimized for high speed. These modules exchanges data with the local inputs or outputs.
Profibus DP slave modules are used for connection of PCD1, PCD2, and PCD6.M300 modules.
Tr-Double-T Proximity Card and Magnetic Band Prox badge and white magnetic NEUTRAL reading and writing "TITAN". Minimum orderable and customizable quantity 50pcs.
The RFW 4000 GSM/GPRS Modules expands the DS 6700, DS 6750 and DS 7700 transmission devices with a second transmission path over 2G, 3G(UMTS) or 4G(LTE).
The redundant wireless channel RFW-3000 GSM is an independent channel for the transmission of hazard reports via a grid-bounded and GSM nets to an assisting location.
The RS 232 Host Interfaces By Honeywell are asynchronic RS 232 host interface that serves as a direct connection device between controllers, terminals as well as control units and RS 232 PC interface.
Honeywell RS-232 Line Driver module set containing the PTE102C and the PTE102K is a stand-alone communication module pair for extending the RS-232 range.
Echelon line module for RS-485 bus with galvanic isolation decoupler to connect up to 32 devices on the same line. It only allows BUS topologies.
RS232 Interface Module is for the serial essernet interface for a length up to 15 m.
RS232-RS485 Interface is used to connect external systems to the intruder alarm control panels 561-MB24, 561-MB48 and 561-MB100.
The RT-NET Modbus central interface modules allows daikin VRV units to communicate via Modbus with the INNCOM IRAS system.
The MIW-INT loop powered radio interface module is designed for use with the Morley-IAS range of analogue addressable control panels.
The Safety Bus system allows the Fire and Fire & Gas detection and the firefighting control in a unique bus assuring a high safety level.
The Remote Telephone Zone Module that allows for secure access to the NFC-50/100(E) Notifier First Command Center via cell phone or a remote telephone means.
VSINTL-PCB from Gent is a Replacement Card for Loop Powered Interface (34450).
The Replacement Mainboard is used for IQ8Control.
The Notifier HLS-RES series are contact interface units for use with the Response Plus and Response Aid paging systems.
SEI Serial Essernet Interfaces has been optimized with respect to the transmission speed and provides optimum comfort in programming, commissioning and service.
SEI Serial Essernet Interfaces EDP can be used as a gateway to link remote computers that support the ESSER data protocol (EDP) & The EDP version (unidirectional) is only provided with information from the essernet, remote control is not possible.
SK-NIC network interface cards work with fire alarm control panels (FACPs), allowing FACPs to connect to one another through broadband networks.
SLC-2 expander modules enable a second signaling line circuit (SLC) loop for Fire-Lite® MS-9600 fire alarm control panels (FACPs).
W-SYNC SWIFT® wireless synchronization modules provide audio and visual synchronization between SWIFT® notification appliances and System Sensor® wired notification appliances, supporting the integrated wired/wireless solution.
The accessories are designed for Salto’s Sallis wireless lock family to expand online access control beyond traditionally wired openings.
SMS SenTRI Network Card for SenTRI two control panel analogue addressable fire systems.
Esser Serial 8-Way Interface has a current rating of 20mA and 13mA each active output.
Serial Connecting Cable is used for connecting the field bus interface to panels 8007, 8000 C/M, 8008, Gateway, ABIGA and IQ8Control.
The N-ANN-S/PG Interface module connects either a serial or parallel printer with a compatible Fire Alarm Control Panel (FACP) to print real-time logs of system events, detector status reports, and event histories.
Silencing Modules by System Sensor are designed for use on compatible fire alarm panels with 24V DC audible signals or speakers, without the need for separate power to the modules.
Multi-mode and single-mode fiber-optic modules are plug-in fiber loop modules that work as a single channel to transmit or receive communications with Silent Knight® network interface cards.
The Westermo Small Form-factor Pluggable transceivers cover versions suitable for 10/100 Mbit/s and Gigabit applications. LC connectors are used as standard due their small size. These transceivers can operate in harsh industrial applications.
Smile Connect Gateway is used to control the Honeywell Smile SDC controller via an App on mobile. With this App you can manage the time programs and easily change the operating mode of the heating regulator using quick actions.
Spare PCB for Vigilon ASD Interface
Stacking module for AT-x600 series switches includes connection cable between switches, length 50cm.
Combination Frames are required for channel installation with small outer radii.
Standard Interface Module enables extinguishing control equipment to be connected to System 8000 control panels. The module is provided with an additional monitored relay, which can be programmed for any function.
Interface card for centralization of AM-8000 system with CEI 79.4 protocol. Interface card is connect on Can bus network between the boxes.
The mains interference suppression filter is intended for later installation in all mains-operated devices in which problems due to HF power failure arise.
The address unit is connected to the emergency luminaire loop to monitor emergency luminaires with potential-free outputs.
TCP/IP converter, Ethernet RS232 / RS485
The Relay Module has unique multi-voltage input from 24 to 230 V UC with colored making.
Proximity tag 125Khz black colour
The VW2W100 “wire to wireless” translator module is an analog system expansion device wired powered directly from the line analog that allows the addition of sensors and modules IN / OUT with system radio communication fire.
Salto Svn Iclass Updater Kit
Universal Interface Module UIM
The Universal Zone Coder provides up to 256 different coded outputs. The UZC-256 requires programming software and a hardware PC interface.
Universal adapter for NOTIFIER fire alarm panels
Upgrade from Parallel Port Dongle to USB. Note: Old dongle must be returned within 20 Days or full charge for a new dongle will be made
Xtralis VESDA High Level Interface is required for connection to the Vesdanet Network.
A VESDA High Level Interface (HLI) enables connection between a VESDAnet and configuration and monitoring platforms.
VESDA Modbus HLI Wall Mount is housed in a metal enclosure allowing for permanent mounting on a flat surface.
VESDA Modbus Type 3 HLI Metal Box is housed in a metal enclosure allowing for permanent mounting on a flat surface.
VESDA Open Protocol HLI Master Slave model, the host supervises the communications link between itself and the HLI (slave) by regularly polling the HLI to determine whether there has been a change in the status of a detector on VESDAnet.
The VESDA Sliding Windows High Level Interface (HLI) links your VESDAnet* with PC software monitoring and configuring tools such as Xtralis VSM4 and Xtralis VSC.
VESDA® VHX-0200 Sliding Windows high level interface (HLI) models enable connections between a VESDAnet™ (a communications protocol that allows devices to communicate on one network) and configuration/monitoring platforms.
VESDA Wall-Mounted Modbus High Level Interface (HLI) links your VESDAnet1 with PC software monitoring tools, Building Management Systems (BMSs) or Fire Alarm Control Panels (FACPs).
Connection box enables external devices to be connected to the VESDANet™.
Xtralis VESDAnet Socket is a VSR spare module for VESDA sub rack.
LRS 300 PC interface used as an alternative to the programming unit. All components on the VESDAnet™ can be programmed via the interface.
VESDA® Modbus type 3 HLIs act as a proxy for all VESDA devices on the VESDAnet™ network, providing access to rich status information available from VESDA detectors, as well as the ability to control and configure these devices.
The VFT-15 VESDAnet Interface Card (VN Card) is a simple Interface for the VESDA VFT-15 detector.
Notifier Wiegand Interface Board third-party equipment without a keyboard, internal clock, 2 Wiegand inputs.
Wiegand Interface Boards are required for ISO magnetic stripe reader, buzzer and memory for degraded operation. They have Integrated MGP-I means 1 low power relay of 2A and 1 double balanced input.
Esser Winmagplus Preconfigured PC without a license for SDI and CMSI (OPC server). Sold with Windows operating system, WINMAGplus and OPC server installed.
Wireless Access Points by Honeywell are Honeywell Home WAP-PLUS (Wireless Access Point) provides secure, wireless networking ability (Wi-Fi®) in iPCAM installations.
Wireless Panel Interface Module (PIM) supports 2 doors.
Honeywell’s X-Series Alarms Wireless Module has been optimised for use by professionals
The X485 is an FLN5 to serial interface PCBA designed for the X05B to connect to FLN5 RS485 networks.
Notifier XLS80e Network Gateway Module PCB plugs directly into the processor PCB in the ID3000.
XPIQ-SLI Software, Upload/Download Software Latest upload/download software, motherboard software and SLC interface board software.
ZI DUAL Channel Interface Units have been designed provide pre-alarm and alarm or separate area protection.
Start your search with category name, product name, part number, etc.
Copyright © 2023 Honeywell International Inc.