You are browsing product catalog for
VESDA Adaptors are produced in red ABS (Acrylonitrile Butadiene Styrene) is a robust polymer, which has the most suitable physical properties for aspirating detection, optimising performance with tensile strength, chemical resistance and ductility.
25 mm Socket Union by VESDA which is specially developed to provide fully matched components for the optimal performance of your whole VESDA aspirating system.
520-CAP is T-branch accessory for capillary pipes.
520-FIN Sampling Points are used for Capillary Tube.
530-FLEX Flexible tube with elastomer and interior metal spring is an accessory used for Suction System.
530-TAP Sample Tubing End Caps is 5 Pack accessory.
The Aspiration fitting accessories consists of tubes, bends, brackets and expansion units.
Nylon capillary tube rolls of 100 meters with 10mm outer diameter and 8mm inner diameter are used for aspiration systems.
The Vesda Xtralis CPVC is a Pipe Cutter with Upto 1.5”. Vesda piping systems are produced from specialty thermoplastics that offer unique benefits
Connector Elbows by Eaton are pico fitting with tubes.
Discrete End Caps are range of sampling points to customize unique needs of applications.
VESDA Capillary Sampling Connector systems are lightweight, and assembled easily in the field using inexpensive tools.
Spare Exhaust Adaptor for the VEU series of aspirating smoke detectors.
Exhaust Deflector is a spare part of VESDA VLS detector.
ICAM Pipe Kits by Xstralis are provides full and comprehensive integration of your smoke and gas detection systems.
LF422 flexible single core tubing provides 1/2-inch inner diameter flexible tubes for use with XAS units in duct sampling.
Label-smoke detector pipes are manufacture from ABS (Acrylonitrile Butadiene Styrene), very lightweight, versatile material, guaranteeing you easy and professionalinstallation.
Large Check Valve comes under accessories of pipes and fittings. This is 25mm and also called as blow out valve.
VESDA-E VEA microbore tubes are custom made, high quality plenum rated flame retardant polyethylene tubes. They have superior stress crack resistance for reliable long-term performance
VESDA-E VEA Microbore Tube Cutter are used for cutting microbore tubes.
The Pipe Elbows by Honeywell are used to divert pipework around obstructions. They should always be connected with ABS Solvent cement.
Pipes are accessories designed for Aspiration Smoke System.
Pipe cutter under pipes and Fittings products have been specially developed to provide fully matched components for the optimal performance of your whole VESDA aspirating system.
A 45 degree pipe elbow by VESDA which is specially developed to provide fully matched components for the optimal performance of your whole VESDA aspirating system.
Pipe Kits for VLQ-100 are a comprehensive range of products provided for VLQ Aspirating Smoke Detectors.
ST metal sampling tubes may be installed from the front or back of System Sensor® HVAC duct smoke detection and monitoring products. The tubes lock securely into place and can be removed by releasing the front or rear locking tab.
STS air sampling tubes are intended for use with duct detection devices.
Sample Tubing Pipes are also available in V0 FIREPROOF material and in WHITE ABS material. To place your order, add / V0 or / B respectively to the pipe reference. Supply on request, check prices and delivery times.
Sampling Pipes Fitting are also available in V0 FIREPROOF material and in WHITE ABS material. To place your order, add / V0 or / B respectively to the pipe reference. Supply on request, check prices and delivery times.
SenTRI duct venturi tube accessories are used for Duct sensors.
SenTRI venturi tube accessories are used for Duct sensors.
Sight Glass with Condensation Drain comes under accessories of pipes and fittings. This is 25mm.
The VEU series of aspirating smoke detectors are the premium detector of the VESDA-E range. An Ultra-wide sensitivity range; 15 times greater than VESDA VLP, and provision for more sampling holes provide an increased coverage in high airflow
Spare air filters are designed for VESDA aspirating smoke systems.
The VESDA Sensepoint XCL- Large Bore detector comes complete with the main detector unit (pre-installed with sensor cartridge), flow cap and elbows.
Capillary Sampling Points has composed of flexible nylon tube 1 meter long, 10mm outer diameter and 8mm inner diameter and support for false ceiling.
VESDA capillary pipes and fittings are produced in red ABS under a stringent quality control system.
VESDA Large Radius bend is part of Reliable smoke detection systems are dependent on a network of specialty piping and fittings that constantly and efficiently carry air samples from protected zones to highly sensitive detectors
VESDA Pipe Clip used to single point fix in Pipe Fittings.
VESDA Tee Junctions are easy and professional installation which committed customer service with full technical advice and support in design or installations.
VESDA-E VEA RA joiners are right angle joiners for VESDA-E VEA microbore tubes. They come in packs of 10.
ASD DET CXN VESDA TALK/LINK
VP-CEMENT solvent cement comes in one pint containers and is for use with VESDA® pipes and fittings.
VP pipe cutters are designed for use with VESDA® pipes.
VESDA® pipes and fittings make up a network of dependable specialty piping that constantly and efficiently carries air samples from protected zones to highly sensitive detectors.
VP-CLIP 3/4-inch pipe support clamps are designed for use with VESDA® pipes. They are required for each five foot length of pipe.
The VEU series of Aspirating Smoke Detectors are the premium detector of the VESDA-E range. They are an Ultra-wide sensitivity range.
VLI Secondary Foam Filter is an Internal secondary filter spare part for VESDA VLI.
VSP benchmark test points placed along the pipes run from the ASD and provide a means to validate the integrity of the system and pipe network.
VSP-877 flush-mount sampling points provide a functionally and aesthetically improved alternative to the conical sampling points used in Xtralis® aspirating smoke detection (ASD) pipe networks.
VSP-878 adapter kits are designed to allow the VSP-877 flush-mount sampling points to be used with larger 1/2-inch capillary tubing.
Vesda ABS End Caps are a part of Vesda pipe and fittings range.These end caps have been specially developed to provide fully matched components for the optimal performance of the whole VESDA aspirating systems.
The Vesda Conical Sample Point Heads are a part of Vesda aspiring systems and are used for the 10mm capillary aspiration pipe.
Vesda Straight Couplings are a part of Vesda's range of pipes and fittings. These couplings are used for joining two pipes.
Vesda Xtralis Label provides the protection of smoke detector system pipe from getting painted by instruction written on label
VESDA Pipes are part of an integrated system manufactured from specialty plastics designed for use with most aspirating smoke detection systems.
Honeywell's Xtralis Tamper Proof Sampling Points are a part of Aspiring Smoke Detection. They can minimize the risk of vandalism and tolerate abuse.
The Xtralis Trunk Adapter PIP-016 have been specially developed to provide fully matched components for the optimal performance of your whole VESDA aspirating system.
Xtralis Trunk Adaptors are part of VESDA Pipe and Fittings. Trunk Adaptors are used for capillary tubes. VESDA piping systems are produced from specialty thermoplastics that offer unique benefits.
The VESDA-E VEA Microbore tubes are custom made, high quality plenum rated flame retardant polyethylene tubes that are reliable long-term performance. They are lightweight and flexible for easy handling and installation.
Start your search with category name, product name, part number, etc.
Copyright © 2023 Honeywell International Inc.