411 Series digital alarm communicator transmitter (DACT) phone cords are 7 feet in length.
005895XLCB cabinets are designed for use with 5895XL intelligent power modules.
9 Pin eNode Cables are used for connecting 2 pcs. eNodes as a "back to back" connection with separate connection of 24 V supply voltage to eNodes
Airborne DC8M are alarm transmitters with eight inputs and two changeover relay outputs. In addition, the Airborne DC8M has the option of serial communication over ESPA-444 from fire alarm systems.
Annunciator Expander Ribbons of 20-wire are connects the ACM J1 with AEM J2.
CCT6 Card Termination Connection between the card and the field is carried out by means of a special cable, provided with a plug-in connector at one of its ends
CEI Flat Cables are available in 1.5m for AM2000N RACK 19
CEI Flat Cables are available in 1.5m for AM4000 RACK 19
CMSI 8000 modules LT DAS wiring kits are used for connecting a DAS to the CMSI 8000 remote control line.
HN-CB37 cabinet provides rugged and effective storage solution for distributed components such as digital control system and power amplifiers.
Canbus Cables are fire resistant in nature and having low attenuation capacity.
Control Panel Interface RS 232 cable is used for interface for programming all Series 8000 fire alarm control panels, extinguishing panel 8010 and 5008 intrusion detection control panels with a notebook and programming software.
Delta Cabinet with Key Locks are empty cabinet with key lock for delta fire control panel with no décor and can be used for additional equipment
Delta Quad Duo Cable Kit fits EDP detector programmer. It has terminals for easy address programming on the Delta Duo luminaires, as well as the IQ8 MCP, IQ8TAL, 4 + 2 and 12 relay transponder.
Cabinets have been designed exclusively for SBUS Distributed Power Module.
Ethernet Cables are used for connecting the Echelon network.
Extended Cable for section interface. Used when the section interface is mounted in the Standard Extension Back-box or in Standard, Deep Expansion Back-box.
Notifier extended LED extension cables are required when the extension chassis is installed in the back-box extension.
FCPS24 battery cables are available in lengths of 10 inches.
Flat Cables are 1.5m for 19 inch rack mounting for AM6000N control panel. They are also used as Special interface kit for firmware update of the AM2000N, AM4000, AM6000N control units.
Formula65 combi LED - LED driver protective grille accessories are used for Formula65 functional emergency light luminaire.
The Plug connectors along with the 16 cables are used for direct connection between the panel cards and the field marshaling terminal blocks. Cables with two connectors are also available (R suffix), which contain the termination and connections.
The cables with plug connectors are provided with 4 wires and used for direct connection between the panel cards and the field marshaling terminal blocks.
IFP Series Serial Cable has used to make IFPN-NION data wiring connections by connecting the serial cable to the NION board and the 5824 serial/parallel module.
ND DAS 8000 kit for individual addressing of DAS control lines for CMSI 8000. Process alarm information from Fire Detection Zones (ZD) coming from a conventional or addressable panel, from conventional Manual Trigger (DM) loops
IPDACT serial programming cables can transfer data in a snap and have DB9/RJ45 ports for instant connectivity.
The Gamewell-FCI Smart Link™ Network provides a peer to-peer interface that allows up to 250 Gamewell-FCI, 600 Series Fire Alarm Control Panels (FACPs) to be linked in a network.
DAS 8000 LC kit is used for connecting a DAS to a position control line of a CMSI 8000. It comes with a Bag of 20 pieces.
Mains Lead Kit are available with IEC connector wired to mains input terminal block for back boxes with mains connector on the right of the box.
Mixed Mode Wiring Kits are used for CMSI SensES, ES Com C, ES Line C and C Com B4U for connecting the standby and safety positions on 2 wires.
020-846 is NF2000/3000 extended panel printer cable available in 2m length required when the printer is installed in the back box extension.
Plug Cable Connectors are used for direct connection between the panel cards and the field marshaling terminal blocks.
The cables with plug connectors are used for direct connection between the panel cards and the field marshaling terminal blocks
Power supply module cascading cable 2.5 m
The Notifier 75554 is a laptop to NUP port programming cable. This device connects the NFN Web Server to an NCM-W/F.
Protective Grilles are used for wall mounting.
The RS-232 port, consists of an RJ11 connector which provides a standard serial port for connection to a Listed output device for supplementary type service.
RS-232 Cable's are used to connect the SLC-IM signaling line circuit integration module to the PC
Response paging system spare cables are used in response paging site survey kits.
Signal/Control/CAT5 Patch Cables are prefabricated cabling from 12 control contacts of the UIM to the cabinet rear panel. Cable set are used for connecting batteries to the emergency power supply. Up to 4 pieces connectable are used per UIM.
SCE is used with the SCS, expanding the capability to control and monitor a total of 16 AHU fans or dampers.
Spare Components & Misc are ribbon cable used to connect DIA to 1010 Display
Termination Cables are required for safety bus (mono/duplex) control boards.
Twisted Cables are used for the link between intrusion panel and field devices on RS485 bus. They are available in 2 wire and 4 wire shielded cables.
Twisted Shielded Cables are available in 2 wires and 1.5 or 2.5 mm². They have 0.5 mm² tinned copper drain and screen with aluminum / polyester tape.
Twisted and Shielded Cables are available in 2 wires and 0.5, 1.0, 1.5 or 2.5 mm. They have Twisting of 10cm pitch. They have degree of insulation of 4 screen with halogen free draining filter.
Universal box for different uses, delivered with 4 pcs. PG 13.5 nipples. It is available with light grey.
XLS80e Extended Panel Printer Cables are required when the printer is installed in the back box extension.
Start your search with category name, product name, part number, etc.
Copyright © 2022 Honeywell International Inc.