Heat Detectors
200 Series heat detectors provide cost-effective, intelligent property protection in fixed and rate of rise formats.
The 200Plus Analogue Addressable Temperature Sensors uses the thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds a threshold of 58C.
302 Series rate-anticipation heat detectors operate within a controlled range of two to three degrees of their setpoints, regardless of the rate of temperature rise. These detectors are available in either 135 °F (57.2 °C) or 194 °F (90 °C) ratings.
The 5251 Series Fixed Temperature Sensors are fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing.
Honeywell's 5809SS wireless fixed heat and rate-of-rise temperature sensors will signal an alarm if the environmental temperature rises above 135 °F if the increase is 15 °F or more per minute.
Fixed Temperature Thermal Detectors are heat sensors which has fixed temperature of 58 °C and it comes with Rate of Rise indication Isolator. It is Type A1R and Requires B501AP as base.
The Fixed Temperature Thermal Detectors linear response allows these sensors to be used to signal temperatures over the range of 78°C. It is Type BS and Requires B501AP as base and these detectors are without isolators.
Intelligent Detectors are designed for Fire Alarm Control Panels 80.
NRXTFIX58 and NRX-TDIFF are Wireless heat detectors suitable for applications where wiring is not feasible. Agile™ is powered by robust MESH network technology providing REDUNDANT communication paths that makes the network highly reliable.
The MI-HTSE-S2I is Morley 78°C fixed temperature analogue addressable sensors, with isolator, employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing, part of Morley Heat Sensors Line.
The MI-FHSE-S2I is Morley 58°C fixed temperature analogue addressable sensors, with isolator, employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing, part of Morley Heat Sensors Line.
The MI-RHSE-S2I is Morley rate of rise heat addressable sensor, with isolator, part of Morley Heat Sensors line.
The Addressable Optical Beam Detector supplied as a combined transmitter/receiver unit with reflector. Suitable for distances from 10m to 100m.
The revolutionary Advanced Intelligent ADEVA range delivers a totally new detector platform that incorporates the new digital Advanced Intelligent ADEVA protocol.
Analog addressable detector Is a thermal overhead detector using subminiature thermistor and microprocessor technology for increase the speed of response. The linear characteristic allows use these detectors to detect temperatures.
Holder for granules for removal of chlorine gas for use on aspiration systems. The holder holds about 2.5 dl granules (251634).
The BC-2 Series beam clamp assemblies consists of a beam clamp, WAW clip and snap button. These assemblies utilizes a plated steel clamp and they are recommended for general indoor use.
Battery Powered Heat Alarms uses a thermal sensor, which measures the change of temperature as an indicator for a fire. It is triggered at a temperature of 58° C. This makes the alarm best suited for areas with high levels of dust or fumes.
Conventional fixed temperature heat detectors
CHD-F135 fixed-temperature heat detectors are self-restoring detectors with low-profile designs.
The advanced intelligent fixed temperature analogue addressable detectors uses low mass thermistors and microprocessor technology for fast response and linear temperature sensing.
The Conventional Fire Detectors by Esser are coventional 9000 series fire detector and are automatic detector with high reliability for mid-sized and smaller objects .
The 2020HF thermal detectors are a 78°C fixed temperature units and a rate of rise unit, use state of the art thermal elements combined with application specific integrated circuits to provide quick and accurate detection of fires
The FD851 series are professional heat detectors for conventional system
The ECO1005 thermal detector belongs to System Sensor’s ECO1000 range of detectors. ECO1000 is a range of conventional detectors produce latest manufacturing technology and supplied with an array of advanced features, making them ‘better by design’.
Conventional high temperature thermal detector are used for the detection of fires in environments where there are sudden changes in temperature in certain periods of weather.
The DTS HD I/O Cables are durable and high quality range of cables used for DTS interfaces.
Delta Terminal is a Windows application that can be installed on laptops, PC’s or PDA.s and makes it possible to remotely control and operate Delta fire Alarm Systems through Internet/intranet.
System Sensor Fixed Temperature Linear Heat Detection Cable range consists of a twisted pair of extremely low resistance (.05 Ohm/ft. of twisted pair) tri-metallic conductors, sheathed in new advanced thermal polymers.
The Digital Linear Heat Detector Cables by System Sensor are fixed temperature Linear Heat Detection Cables and range consists of a twisted pair of extremely low resistance (.05 Ohm/ft. of twisted pair) tri-metallic conductors.
Discovery provides the opportunity for automatic environmental adaptation in demanding spaces by individually changing the detectors' sensitivity and response.
System Sensor’s ECO1000 range of detectors have been produced using the latest in manufacturing technology, supplied with an array of advanced feature.
ECO1003 optical smoke sensors use state-of-the-art optical chambers combined with application-specific integrated circuits (ASIC) to provide quick and accurate detection of fires.
Explosion Proof Probe suitable for installations with explosive atmospheres, warehouses of hazardous materials and exhaust ducts or areas with the presence of corrosive elements or vapors of condensation.
FDD Series mechanical heat detectors offer property protection against fire and are intended for non-life-safety installations where smoke detectors are inappropriate.
The FDX-551 Series are analogue addressable, low profile Thermal smoke sensors designed for use with any NOTIFIER protocol fire alarm control panel.
Automatic heat detector with fast semiconductor sensor for reliable detection of fires with distinctive heat.
H365 Series addressable heat detectors come equipped with advanced thermal technologies and a sleek, modern, and contemporary design making them ideal for both system operation and building design.
Thermal detectors of HD series guarantee high measure precision for long period and high immunity from EMI interference. Both peculiarities confer to HD high performance, reducing the probability of false alarms.
The HM series advanced intelligent thermal sensors are plug-in type fire sensors that use a single thermistor sensing circuit to provide early warning of developing fires, together with addressable communication with the fire panel.
Morley-IAS HM Series Thermal Detectors by System Sensor are point type fire sensors that uses an accurate thermistor sensing circuit with addressable communication with the fire alarm panel.
Heat detecting cable based on cables that short-circuit at a given temperature, 68 ºC, 88 ºC or 105 ºC.
The heat detecting cable control boxes are used to detect the exact location where the heat detecting cable has tripped. These control boxes can be operated from the IQ8Quad loop devices.
Honeywell's NEW DET8M sensors are versatile wireless device that can be configured to operate as a standalone temperature sensor or a flood sensor. These offers a real advantage in detecting flooding
The Horizon Range Thermal Detectors have been produced using the latest in manufacturing technology and supplied with an array of advanced features, making them “better by design”.
IDP plug-in thermal detectors with integral communication provide features that surpass conventional detectors. These thermal detectors are for use with Silent Knight® IFP-Series fire alarm control panels (FACPs).
IQ8Quad Detector are designed for heat detection.
Notifier FST-951 Series intelligent thermal detectors are designed for both performance and aesthetics. These thermal detectors provide effective, intelligent property protection in a variety of applications.
H355 Series intelligent addressable thermal detectors use state-of-the-art thermistor sensing circuits for fast responses.
FST-851 Series Intelligent Plug-in Thermal Detectors by Notifier with integral communication has features that surpass conventional detectors.
Ex barriers are used for the operation of intrinsically safe IQ8Quad Ex series detectors and they connect directly on the esserbus or esserbus Plus with individual addressing in connection with the 805590 detector base modules.
Intrinsically safe rate of rise thermal detectors are presents with limited power circuits and they eliminates the possibility of ignition in explosive atmospheres. They have two 360 degree view LEDs for status indications.
LD - Series Digital Linear Heat Detection Cable provides a range of cables with different Temperature Versions. LD Series is intended for general purpose applications.
The Linear Distributed Temperature Systems delivers a significant improvement in measurement performance by Performance Calculator which can be obtained from AP Sensing.
The linear heat detection electronic interface modules allows early detection of fire or overheating. The electronic interface modules consists of two compnents the sensor cable and the alarmline control unit LWM-1.
Linear heat detection standard high resistance intelligent cables are recommended for environments ranging from clean and dry to moderate dust and moisture.
Linear Heat Series Sensor Cables are a comprehensive range of sensor cables with high tenstile strength, compact dimensions,halogen-free and flame-retardant cable sheath.
Mar fire Detection units are stand-alone configuration based control units capable of managing two or four sections of digital heat-sensitive cables and each cable can have a maximum length of 1,000 meters.
The rate of rise heat detectors consist of a probe and an electronic circuit for the conditioning of the signal generated by the transducer.
OSID beam detector FTDI cables allow connection of a PC with OSID diagnostic software to the imager.
The Opal NFXI-TDIFF is Notifier rate of rise heat addressable sensor, without isolator, part of Notifier Heat Sensors Line.
The Opal NFXI-TDIFF is Notifier rate of rise heat addressable sensor, with isolator, part of Notifier Heat Sensors line.
The Opal NFX-TFIX58 & NFX-TFIX78 are fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing
Optical Heat Sensor Sounder Combines optical heat detection with an 85dB(A) sounder.
The temperature sensor cables are linear heat detectors that detects heat at any point along its length. Sensor cables consists of two conductors individually insulated by a polymer sensitive to temperature increase.
Honeywell TC806B3010 FSP-951 Series low-profile Intelligent Photoelectric Sensor Flash Scan series detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel
The ProtectoWire Linear Heat Detectors are proprietary cables that detects heat anywhere along its length.
Protectowire linear heat detectors are proprietary cables that detects heat anywhere along its length, these sensor cables are comprised of two steel conductors individually insulated with a heat sensitive polymer.
System Sensor 5351E thermal detector are combined with the latest in thermal element technology which provides efficient and accurate detection of fires in environments such as bars or kitchens.
Rate of rise Thermal Detector by System Sensor provide an alarm when the rate of rise in temperature exceeds 10C/minute or if the temperature exceeds a threshold of 58C response Class A1R.
The TMP2 series rate of rise heat detectors consist of a probe and an electronic circuit for the conditioning of the signal generated by the transducer.
The TMP2 series rate of rise heat detectors consist of a probe and an electronic circuit for the conditioning of the signal generated by the transducer
Rate-of-rise consists of a thermistor with action at 57C a rate of speed of increase of temperature. It's possible to connect the detector to all NOTIFIER panels, through direct connection with conventional power plants.
Rate of Rise Dust Thermal Detectors introduced double cable holder.Also introduce new outlooking terminal for easy installation.
Rate-of-Rise heat detector with fault information on optical smoke detector
Rate-of-Rise heat detector accessories are available in class 1, class 2, and class 3. These detector accessories are required in Bus-1 system smoke detector base modules.
Rate-of-Rise heat detectors with fast semiconductor sensor provides reliable detection of fires with rapid temperature rise and integrated maximum value function for the recognition of fires with slow temperature rises.
Automatic heat detector with fast semiconductor sensor for reliable detection of fires with rapid temperature rise and integrated maximum value function for the recognition of fires with slow temperature rises.
Automatic heat detector with a single thermistor to sense the air temperature around the detector.
S-Quad product integrates dual angle smoke, heat and carbon monoxide gas detection with electronic sounder, speech and LED flasher (Strobe) in one assembly.
S-QUAD Heat Sensors improves both the speed and integrity of fire detection whilst reducing false alarms. Each sensor element has sensitivity settings which can be adjusted to suit the environment / application.
Gent S-Quad Sensor And Sensor Sounder With Built-In Short Circuit Isolator, Programmable Sensor. Heat Sensor With Sounder Is A Unique Combination Of Sensing Elements To Provide Quick, Intelligent Fire Decisions
Heat Sensor And Sounder With Built-In Short Circuit Isolator, Programmable Sensor. Heat Sensor With Sounder Is A Unique Combination Of Sensing Elements To Provide Quick, Intelligent Fire Decisions
The S200 Thermal Detectors are analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear/raising temperature sensing.
The Conventional Notifier FD-851RE Rate of Rise Heat detector, incorporates the latest in thermal element technology, the detector provides efficient and accurate detection of fires
The Conventional Notifier FD-851HTE A 78°C Fixed temperature Heat detector, consists of a thermistor detecting high temperatures.
The Conventional Notifier SD-851TE A multicriteria detector, incorporates an optical chamber and a thermal element, which in turn are continually monitored by an on-board processor by using algorithms developed specifically for the unit.
SD365 Series intelligent plug-in smoke detectors are designed for both performance and aesthetics.
The SD505-HEAT is an addressable fixed temperature heat sensor that uses a thermistor sensing circuit to produce an alarm when the temperature goes above the trip point programmed at the panel
SK-HEAT addressable heat and rate-of-rise detectors are plug-in thermal detectors with integral communication features that surpass conventional detectors.
SMART3 replacement probes are required for S2130 / S2131 gas detectors.
The SMART4 combines 4 separate sensing elements to act as a single unit. CO sensing (using EC technology) for monitoring CO products from a smouldering fire, IR sensing for measuring ambient light levels and flame signatures.
SWIFT intelligent wireless detectors provides secure, reliable communication to the Fire Alarm Control Panel (FACP) across a Class A mesh network. Wireless detectors can use where it is costly, possibly dangerous to use traditional wired devices.
Wireless detectors are intelligent (addressable) detectors provide secure, reliable communication to the Fire Alarm Control Panel (FACP) across a Class A mesh network.
SWIFT® WSK-HEAT detectors are wireless, addressable detectors that provide secure, reliable communication to the fire alarm control panel (FACP) across a Class A mesh network.
SWIFT® Wireless Detector by Gamewell-FCI are intelligent (addressable) detectors which provide secure, reliable communication to the Fire Alarm Control Panel (FACP) across a Class A mesh network.
The System Sensor Select Series intelligent thermal detectors with integral communication provide point location for alarm communication and selective maintenance.
Sensor cables uses plastic coaxial cable with "Rilsan" nylon coating, acid and base resistant.
To reduce deployment cost and time, we are optionally offering preassembled pig tails. This enable quick and easy onsite installation, with no need to organize a fusion splicer, splice box to get the sensing cable connected to the DTS detector
The series 200 advanced fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing.
Series 200 advanced fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing.
Series 200 advanced fixed temperature analogue addressable isolator version sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing.
The series 200 advanced temperature isolator version sensor uses the thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10°C/minute (typical).
The Series 200 Fixed Heat Detector range 52051E provides fixed 58⁰C temperature sensing (Class A1S). They are plug-in type fire sensors that use a single thermistor sensing circuit to provide early warning of developing fires.
The Series 200 Rate of Rise Heat Detector range 52051RE provides fixed 58⁰C and rate-of-rise (10⁰C/minute) temperature sensing (Class A1R).
Sensor for after-sales service CO carbon monoxide detector
Smart 3G replacement gas sensors are required for Smart 3G gas detectors. These replacement gas detectors are available in various gas types such as methane, hydrogen, propane, LPG gases, etc.
Wire guards for protecting smoke and heat detectors from physical damage
Heat Sensor Sounder Combines heat detection with an 85dB(A) sounder.
Steel FRNC Sensor Cable Connector
System Sensor Rate Of Rise Thermal Detectors By Honeywell is Used For Fire Safety Systems
The HM Series Advanced intelligent thermal sensors are plug-in type fire sensors that use a single thermistor sensing circuit to provide early warning of developing fires, together with addressable communication with the fire panel.
TC808 Series Thermal Detectors use a state-of-the-art single thermistor sensing circuit and have been designed for inclusion in the fire alarm circuit for early fire detection.
TMP2 probes and detectors are particularly suitable for facilities with high risk environmental conditions with the presence, for example, of corrosive elements or condensation fumes, such as commercial plants and industrial, explosive atmospheres.
The TMP2 range includes an electronic circuit which generates precisely measuring the probe. SMD technology has reduces the electronic board to the minimum size. This is so integrated in the measuring probe.
TS300 dual temperature sensors feature simultaneous use of local and remote temperature probes, programmable hysteresis, and audible alarm with silence timeout.
Fixed Temperature Intelligent Linear Heat Detector for PC Modulator for Rate-Of-Rise and EOL Box for Rate-Of-Rise.
The 52051REI provides fixed 58C and rate-of-rise (10C/minute) temperature sensing Class A1R
The NOTIFIER® NH-200 Series intelligent thermal detectors are designed for both performance and aesthetics, and are direct replacements for the NH-100 Series.
Thermosensitive special cables consist of two conductors to the predetermined temperature of 105°C or 68°C which indicate the alarm at the time of short-circuiting.
Velociti® Series 3 thermal detectors are intelligent detectors with integral communication that provides locations for alarms and selective maintenance.
Velociti Series addressable thermal sensors are plug-in thermal sensors with integral communication features that surpass conventional sensors.
Optical/Heat Sensor by Gent detects smoke from a slow burning fire and/ or heat from an intense fire producing little smoke.
The Vision's range of Fixed Temperature Detectors are a part of Honeywell. These are fixed 58 degree celcius temperature detectors.
W-H355 wireless fixed thermal detectors are addressable detectors that provide secure, reliable communication to the fire alarm control panels (FACP) across Class A mesh networks.
Self-resetting thermal probe with activation range between 99 ° C and 115 ° C (class D) mounted on watertight aluminum case with IP 66 degree of protection. Suitable for indoors and outdoors.
Wireless Temperature Sensors and Flood Detectors are Ideally suited for applications including bathrooms, laundry rooms and basements, the 5821 helps protect against temperature fluctuations and flood conditions.
Start your search with category name, product name, part number, etc.
