The printer is used with the Gamewell-FCI fire alarm control panels (FACPs) and provides printer capability to produce a written record of system events and status changes.
302 Series rate-anticipation heat detectors operate within a controlled range of two to three degrees of their setpoints, regardless of the rate of temperature rise. These detectors are available in either 135 °F (57.2 °C) or 194 °F (90 °C) ratings.
411 fire alarm communicators are compact, multifaceted, slave devices designed for a variety of fire, security, and non-fire applications.
411RK auxiliary relays are for use with Gamewell-FCI® 411UDAC digital alarm communicator transmitters.
411UDAC fire alarm communicators are compact, multifaceted, standalone or slave devices designed for a variety of fire and non-fire applications.
4XZM zone relay modules provide four Form C relay contacts to fire alarm control panels (FACPs).
4X™F transmitter modules provide output for local energy municipal box transmitters, and alarm and trouble reverse polarity circuits. The modules include a disable switch and disable trouble LED.
Flush-mount boxes are for use with Fire-Lite® ACS Series annunciators. These enclosures provide remote mounting of a single annunciator module.
The ACS-Series Annunciator and Control System provides arrays of LEDs to indicate point status, zone status, system status, and ability to perform system reset, silence, acknowledge and drill.
ANN-MBRLY mounting brackets are for use with NOTIFIER® NFW2-100 fire alarm control panel (FACP) applications.
The ANN-80 annunciator is a compact, backlit, 80-character LCD fire annunciator that mimics the Fire Alarm Control Panel (FACP) display provides system status indicators for AC Power, Alarm, Trouble, Supervisory, and Alarm Silenced conditions
AP-P adapter plates are decorative plastic adapters for mounting 302 Series detectors to four-inch outlet boxes.
Anti Condensation Film is an easy applicable film that provide long time resistance to condensation on the acrylic Emitter lens
Anti-Condensation Film is used for OSID-EH housings. An easy applicable film that provide long time resistance to condensation on the glass fronts.
Apollo Detector Discovery Baffles are used to direct the sampled airflow through the point detectors housed in the ICAM IAS aspirating smoke detector.
B200S Intelligent Sounder Bases set a new standard for performance, installation, and aesthetics. They are addressable sounder bases that require a unique, separate sounder base address.
F210 flanged rings are designed for use with B210LP detector bases.
B224BI Plug-in Isolator Detector Bases prevent an entire communications loop from being disabled when a short circuit occurs.
B224RB Detector Relay Bases are designed for use with 200 Series detectors, and provide a single Form C contact relay for the control of auxiliary functions, such as door closures and elevator recall.
F110 flanges are replacements for the flanges on B400 Series detectors.
BAT Series batteries are Power-Sonic brand batteries. BAT series (or Power-Sonic brand) batteries are recommended for secondary power or backup power for all NOTIFIER® fire alarm control equipment.
Heating kits for use to prevent condensation with the BEAM1224 conventional beam smoke detectors. They lessen the likelihood of condensation by maintaining the unit at a temperature that is slightly higher than the surrounding air.
BEAMLRK long-range kits are designed for use with System Sensor® reflective projected beam smoke detectors and allow installation between 230 to 380 ft (70 to 100 m) apart.
BEAMMMK multi-mounting kits allow reflectors and reflected beam detectors to be mounted to either vertical walls or ceilings.
Backboxes are for use with fire alarm control panels (FACPs) and are used to mount up to two batteries and power supplies.
Battery charger circuit board and mounting chassis are designed for use with fire alarm control panels (FACPs).
The Blanking Baffle is used with ICAM IAS aspirating smoke detector.
CAC-4 Class A converters are for use with Gamewell-FCI® Flex 404 4-zone fire alarm control panels (FACPs).
CB500 wiring barriers are used to separate power-limited and nonpower-limited wiring inside of junction boxes.
CHS-4L chassis are for use with NOTIFIER® fire alarm control panels (FACPs). They are low-profile, 4-position chassis and mount two AA-30 amplifiers.
DCOIL remote test coils are required for older DNR(W) duct detector housings.
The System Sensor DH400OE-1 is a steel enclosure for mounting a standard indoor rated duct smoke detector outdoors.
DP-51050 dress panels are for use with Fire-Lite® MS-5UD/MS-10UD Series fire alarm control panels (FACPs). They restrict access to the system wiring but allow access to the membrane switch panel.
Detector test magnets simplify detector testing and maintenance
Single Terminal Back Boxes are used for mounting RTS151 key. Remote annunciator accessories providing reset function and has a Red LED to indicate alarm conditions.
Use an End-of-Line device with control panel releasing circuits.
End-of-line (EOL) resistors are sold in packs of 10 and are available in 4.7 or 47K Ohm.
FHS firefighter handsets are used to communicate over the telephone circuit and allow simultaneous operation of up to 10 firefighter remote handsets when connected to the firefighter telephone systems (NFC-FFT and ECC-FFT).
FM Series electromagnetic door holders are designed for virtually any remote door release application. They are primarily used to hold fire and smoke barrier doors open until released by a remote smoke detector or other switching device.
FM Series electromagnetic door holder by Fire-Lite are designed for virtually any remote door release application. They are primarily used to hold fire and smoke barrier doors open until released by a remote smoke detector or other switching device.
FM-Series electromagnetic door holder spacers are used, when necessary, for the installation of remote door release systems.
VSP 850 in-line filters provide Xtralis® customers the ability to address a wide array of harsh environments with high levels of airborne contaminants in a simple and cost-effective manner.
XRM optional transformers are designed for use with Fire-Lite® fire alarm control panels.
The trim rings are designed for semi-flush mounting applications, and intended for use with BG-12 Series fire alarm pull stations.
Fire-Watch 411 Series digital alarm communicator transmitter (DACT) handheld programmers are digital devices used to locally program NOTIFIER® 411 Series DACTs.
FireWarden® ZNAC-92 Class A converter modules convert four Style Y (Class B) NACs to four Style Z (Class A) circuits.
TR-1 trim ring assemblies are for use with Gamewell-FCI® Flex 4-zone fire alarm control panels (FACPs). They allow semi-flush mounting of the cabinet. Red and black options are available.
IPDACT IP communicators are designed to transmit fire alarm system information to central monitoring stations over any standard IP network.
IPDACT serial programming cables can transfer data in a snap and have DB9/RJ45 ports for instant connectivity.
IPDACT Series Mounting bracket kits are for use with NOTIFIER® IPDACT Series IP communicators. The kits consist of screws and battery shield with standoffs.
IPSPLT splitters allow connection of both panel dialer outputs to one cable input to the internet protocol digital alarm communicators/transmitters (IPDACT).
ISO-6 six fault isolator modules provide six equivalent circuits that will allow a portion of the communications loop to continue operating when a short circuit occurs on that loop.
In-Line Filter Elements provide to customers the ability to address a wide array of harsh environments with high levels of airborne contaminants in a simple and cost-effective manner.
InnovairFlex™ duct smoke detectors combine an impressive collection of innovations designed to save you time and money and provide the flexibility you need in the field.
Installation/removal tools are designed for use with System Sensor® plug-in smoke detectors. They permit installation and removal of detectors in elevated mounting locations.
Intelligent Detector Color Kits are designed for use with NOTIFIER® intelligent detectors.
The B200SR sounder and LF sounder bases are fully compatible with existing B501BH Series sounder base installations. The device enables users to select one of two B501-supported tones (ANSI Temporal 3 or Continuous) through a jumper.
IPENC external enclosures are for use with NOTIFIER® IPDACT internet monitoring modules. Includes IPBRKT mounting bracket. Red and black options are available.
KILLARK® XAL-53 explosion-proof pull stations are suitable for use in hazardous areas due to the presence of flammable gases or vapors, combustible dust, or easily ignitable fibers.
The DST family of sampling tubes are pieces of steel piping with a series of holes drilled the entire length of the tube and should extend the entire width of the duct.
The Mounting Base is required to meet local code and application requirements and for that System Sensor offers standard 4in and 6in bases.
OSE-RBA spare alkaline battery packs are intended for use with the open-area smoke imaging detection (OSID) devices.
OSID beam detector FTDI cables allow connection of a PC with OSID diagnostic software to the imager.
OSID wire guards are steel cages designed to protect OSID imagers and emitters from vandalism and accidental damage. The cages are constructed of heavy gauge steel wire with a corrosion-resistant polyester coating.
OSID environmental housings protect OSID imagers and emitters from dust and water ingress in industrial environments. The glazed housings are made of ABS and the glass windows cause minimal attenuation of the UV and IR beams.
Installation kits for OSID detectors include a laser alignment tool, a test filter, a PC cable, a cleaning cloth, and a manual.
OSP-002 laser alignment tools allow for quick alignment of OSID detectors. They also align and lock the eyeball and activate the emitters when locked.
OSP-003 acrylic test filters are intended for use with OSID detectors.
Open-area smoke imaging detection emitters (OSIDs) are a new innovation in projected beam smoke detection technology using advanced dual wavelength projected beams and optical imaging technology for early warning smoke detection.
P48-21-00 end caps for metal sampling tubes are intended for use with conventional and intelligent duct smoke detectors.
PAM multi-voltage relay modules are ideal for applications where remote relays are required for control or status feedback.
Flush Sample Point Head only for 10 mm OD tube.
PRT/PK programming cables are for interfacing compatible Fire-Lite® devices with a printer or Windows™ based PC.
Remote annunciators are designed for both conventional and intelligent applications. Their red LED provides visual indication of an alarm condition.
SB-I/O surface-mount backboxes are for use with Silent Knight® PS-SA and PS-DA pull stations.
SB-10 surface backboxes are for use with Fire-Lite® BG-12LR agent release stations.
SMB600 flanged surface mounting kits may be used with certain System Sensor® smoke detectors when flush or recessed mounting are not possible.
Banderoles to mark the suction points
Seismic Mounting and Bracket Kit
Replacement dust covers are for use with System Sensor® 100/200 Series smoke detectors.
The Fire-Watch 411 series from Fire-Lite Alarms are compact slave Digital Alarm Communicator Transmitters (DACTs) that are designed for a variety of fire, and non-fire applications.
SpectrAlert® Advance audible visible (AV) accessories offer a wide range of products that meet a variety of application requirements.
Surface backboxes are for use with Fire-Lite® BG-12LR agent release stations.
System Sensor BEAMSMK are the surface mounting kit for the reflective projected beam smoke detector which are used whenever surface wiring is being used.
VESDA® VLF-500 smoke detectors are early-warning detectors designed to protect small, business-critical environments of less than 500 m² (5,380 ft²).
VESDA Pipe and Fittings are part of an integrated system manufacturedfrom specialty plastics designed for use with most aspirating smoke detectionsystems, the VESDA VLP system in particular
VESDA® VLF-250 smoke detectors are early-warning detectors designed to protect small, business-critical environments of less than 250 m2 (2,690 ft2).
VESDA® pipes and fittings make up a network of dependable specialty piping that constantly and efficiently carries air samples from protected zones to highly sensitive detectors.
VESDA® VPS100/300 and power supplies are capable of providing operating power, including battery backup, for the entire line of VESDA by Xtralis® aspirating smoke detectors.
VESDA® filter cartridges are used to replace filter cartridges in VESDA VLC, VLF, VLP, and VLS detectors.
VP-CLIP 3/4-inch pipe support clamps are designed for use with VESDA® pipes. They are required for each five foot length of pipe.
Vesda Test Transformers are previously known as the Hot Wire Test Power Supply Unit. They are used to test very early warning aspirated smoke detection equipment.
Pipe – 3⁄4”
The Visor ALARM® PLUS Receiver from Teldat™ is solution to manage and receive alarms from the Fire Watch™ IP series fire alarm communicators or Talgat's MIP™ IP communicators. Each Visor ALARM PLUS receiver supports up to 3,000 alarm panels.
W-USB SWIFT® transceivers can be used to conduct a site survey or to interface with all addressable wireless devices allowing for faster and easier configuration.
Xtralis Smoke detector is an interface card for the range of Xtralis VESDA VLF smoke detectors. Multi-function Control Card expands the range of input and output communications a VLF detector can perform.
Start your search with category name, product name, part number, etc.
Copyright © 2023 Honeywell International Inc.